Buscar en el registro

While working on Dozer, equipment number 2550, employee was standing on the Dozer tracks replacing hydraulic hose and o-ring, when his foot slipped off the tracks and he fell about 4 to 5 feet to the ground, landing on his back.

Employee was walking on the wet concrete walkway in the feeder tunnel when he slipped and fell on to the concrete walkway. Employee stated that he fell on his left side of his body, using his left hand to cushion his fall.

Employee was seen wiping the windows on the CAT-773 haul truck and about 5 to 10 minutes later he was seen by the Stockpile Operator, laying on the ground in front of the haul truck. Employee sustained a laceration to his head and broke his right wrist.

While walking on ground level, employee slipped in muddy area and bent his right knee. Employee regained his balance and did not fall to the ground, however he heard a pop noise from his right knee.

Our employee broke his upper shin bone below his knee on his right leg while repairing a 988B Cat Loader for Ameron. The 4 ft. platform he used to gain access to an area to replace a pin collapsed. He is waiting to have surgery.

While working in the tertiary plant, employee stepped onto screen #5 to retrieve a piece of wood when his left leg slipped and twisted causing pain to his left knee.

After punching out for the day, employee was descending down from the stairway when he lost his footing from the middle landing of the steps and tumbled down the remaining 9 steps.

While refueling the D8 Dozer at the fuel station, employee was descending from the equipment with his right hand on the dozer's railing. As he reached out to grab the fuel nozzle with his left hand, his left foot slipped causing a jerking motion unexpectedly to his right arm. Thereafter he started to feel mild pain. Incident reported on 4/02/08

While cleaning out the bypass chute behind crusher 2, employee stepped on section of the catwalk that appeared to be rusted and fell partly through hitting his right thigh on the electrical conduits and the tail pulley guard. As a result employee sustained abrasions on forearm, contustion of the thigh and laceration to left palm.

While getting out of the truck to buy lunch, employee slipped and fell to the ground landing on his back.

After pumping fuel, employee slipped off platform near cab door, falling approximately 2' and landed on the dozer tracks hitting his right arm on the grab handle and exterior wall of the cab.

EE hit right knee on stairway after near fall from rock on ground.

While returning to work from lunch break, employee struck his right knee on the trailor hitch of the working foreman's truck.

While climging the ladder to enter into the cab of truck 1391, employee slipped off ladder straining his left ring finger, wrist and shoulder.

While stepping up on service truck to turn on valves, foot slipped and EE strained left hip and thigh area.

While climbing up the steps on the hydraulic drill (equipment 2041) to check the radiator water, EE alleged to have slipped on some oil film that was on the steps and fell back. EE landed on his feet and claimed to have strained his lower back.

AFTER PARKING THE JOHN DEERE EXCAVATOR IN AN AREA OF LOOSE GROUND TO SERVICE A HAMMER EQUIPMENT, HE ALLEGES TO HAVE STRAINED HIS LEFT FOOT WHILE STEPPING OFF THE MACHINE ONTO LOOSE GROUND

While walking down from conveyor #3 catwalk, employee slipped on a water hose that was buried with material. In the process of breaking his fall, employee strained his lower back.

WHEN CLIMBING DOWN EQUIPMENT #773, HE STEPPED ON UNEVEN GROUND, STRAINING RIGHT KNEE.

EE WAS CLEANING THE RETURN ROLLERS FROM C20 CONVEYOR AND HE SLIPPED. WHILE HE WAS FALLING, HE GRABBED THE SAFETY GUARD AND THE WIRE FROM THE SAFETY GUARD PUNCTURED THRU HIS GLOVE AND BETWEEN H IS TWO FINGERS. LACERATION ON RIGHT HAND LONG FINGER SUTURED IN EMERGENCY ROOM.

THE EE WAS ASSISTING TO FREE A LARGE PIECE OF CONCRETE THAT WAS WEDGED IN THE FEEDBOX. A CRANE, FITTED WITH A SLING, WAS ATTEMPTING TO PULL THE PIECE FREE WHILE THE EE WAS POSITIONING THE PIEC E WITH A BAR. THE BAR SLIPPED AND THE EE FELL ABOUT 6 FT UNTO A CATWALK. FALL PROTECTION WAS AVAILABLE BUT WAS NOT UTILIZED BY THE EE.

THE EE WAS PUTTING OIL INTO THE GEAR BOX ON CONVEYOR 10 AND SLIPPED ON THE FEED BOX. THE EE SPRAINED HER RIGHT ANKLE.

WHILE EXITING WATER TRUCK, THE EE SLIPPED AND FELL. AS A RESULT, THE EE STRAINED THE LIGAMENTS IN HIS LEFT KNEE.]

INSTEAD OF WAITING FOR FOREMAN TO PICK HIM UP, EMPLOYEE RODE THE WATER TRUCK TO THE LUNCHROOM. SINCE TRUCK WAS NOT MEANT FOR PASSENGERS, EMPLOYEE SAT ON PLYWOOD BOARD. WHILE GETTING OFF OF TRUCK, EMPLOYEE SLIPPED, LANDED ON BOTH FEET, BUT FELL ON LEFT SHOULDER.

AS THE EMPLOYEE WAS CHANGING THE WEAR BARS ON THE HSI CRUSHER, HE SLIPPED AND FELL BETWEEN THE ROTOR AND FRAME.

EMPLOYEE FELL APPROX 15' THROUGH 27" BY 33" MAINTENANCE ACCESS OPENING IN THE CATWALK. EMPLOYEE LANDED IN THE AREA THAT WAS BEING WORKED ON.

WHILE ATTEMTPING TO CORDON OFF AREA ON CATWALK WITH CAUTION TAPE EE FELL PARTIALLY THRU A HOLE.

EMPLOYEE WAS WALKING IN A MUDDY AREA NEAR THE TERTIARY PLANT WHEN HE SLIPPED AND TWISTED HIS RIGHT KNEE.

EMPL WAS INSTALLING PVC CONDUIT FOR ELECTRICAL LIGHT LINES WHEN HE SLIPPED & FELL ABOUT 5' DOWN GRADED SLOPE & SUFFERED LACERATION TO FOREHEAD.

WHILE EMPL WAS HARDFACING CRUSHER SCREEN HE STRAINED RIGHT KNEE,

EMPL WAS SERVICING LOADER & SLIPPED ON BAR WHILE STEPPING DOWN HITTING RIGHT SHOULDER ON SERVICE TRUCK.

THE WELDING CREW WAS INSTALLING CATWALKS, RAILINGS LADDERS AT THE NEW CRUSHER INSTALLATION. EMPLOYEE WAS ASKED TO OPEN CRUSHER LID FOR DAILY INSPECTION. SINCE THE WELDERS WERE USING THE TEMP. LADDER, EMPLOYEE CLIMBED ONTO CONVEYOR TO GET TO TO MACHINE. AS HE STEPPED ONTO CONVEYOR COVER, HE SLIPPED AND FELL ABOUT 11 FEET TO THE GROUND.

WHILE OPENING T2E HOOD ON A TRUCK AND TRAILER (818), EMPLOYEE'S FOOT WAS STUCK BETWEEN THE BUMPER AND THE GRILL. HE FELL BACKWARDS ON HIS BACK AND SAFETY STOP CABLE ON THE HOOD BROKE AND THE H OOD FELL ON HIS3CHEST.

WHILE CLIMBING 2FF THE DOZER HIS RIGHT FOOT GOT CAUGHT BETWEEN THE D-8 FRAME AND TOOL BOX CAUSING HIM TO FALL.

WHILE INSTALLIN1 TIRE EMPLOYEE SLIPPED ON OILSPILLAGE.

CLIMBING DOWN FROM SHOVEL,STEPPED ON ROCK AND FELL.REACHED AS HE FELL WITH LEFT ARM.