Buscar en el registro

A technician was dismounting a 990k wheel loader. They lost their footing on the side ladder and caught themselves before falling causing a strained lower back.

A miner was descending from the water truck and lost footing at the bottom resulting in a small fall.

Miner was setting up a temporary work platform when they slipped and fell to the conveyor below them.

Employee was putting away new screen panels and walking across the pallet they were received on. Employee stepped between boards and suffered a back strain.

Miner/Supervisor was assisting with a screen change on the 6x20 portable screen plant. Supervisor was exiting the screen walkway and stair when they turned and missed the stair and fell to the ground.

Operator and Supervisor were conducting an examination of the work place. The operator was being task with a job. While walking the area, the Operator slipped and fell to the ground. The root cause of the accident was snowy conditions and the underfoot conditions. The diagnosis was back soreness and minimal bruising.

The operator was opening the radiator cap to the loader when it poped open, spraying coolant up into the air and on the operator. The operator jumped from the loader and broke his ankle. He also had some minor 1st degree burns.

Employee climbed the two step ladder on the 35 ton grove crane and hit his knee on the ladder. The diagnosis was a small contusion of the knee.

EE was climing off the ladder of the HD605 Haul truck, when he placed his feet on the ground and made a turning motion, he twisted his knee. The pain was very minor and was not reported immediately. The small pain continued and he reported his accident on 12/7/05. He was sent to the doctor and it was concluded that he had a sprained knee and was put on a ladder restriction.

The mechanic was performing maintenance on a wheel loader. He was walking in front of the loader with his hands full of tools and slipped. He hit his elbow on the way down to the ground. He was o.k. to work the rest of the day and weeks later. It slowly started to swell and he sought medical attention on Oct. 26. The doctor said it was a bruise that possibly needed drainage.

EE HAD STARTED CLEANING HIS WINDOWS ON THE 980F CAT LOADER BEFORE HE STARTED THE MACHINE. WHEN EE STEPPED TO THE PLATFORM ON THE RIGHT FRONT FENDER TO CLEAN THE SIDE WINDOW, HE SLIPPED ON THE WET SURFACE OF THE PLATFORM AND FELL INTO THE FRONT HEADLIGHT ON HIS WAY DOWN TO THE GROUND. EE CUT HIS CHIN ON A SCREW - REQUIRED 10 SUTURES.

EE WAS CHANGING OIL ON ENGINE OF CAT 980F. HE WAS STANDING ON BATTERY BOX ON BACK OF MACHINE. HIS FOOT SLIPPED OFF BATTERY BOX AND HE FELL ABOUT 3' TO GROUND, LANDING ONHIS LEFT ARM, BREAKING HIS LEFT WRIST.

EMPLOYEE WAS PULLING A SAMPLE OF 3/8" ROCK FOR A SOIL TEST. EMPLOYEE HAD A SEISURE AND ROLLED DOWN THE BACK SIDE OF THE PILE INTO ABOUT 3 FEET OF STANDING WATER THAT CAME FROM THE WASH PLANT. THE PLANT OPERATOR PULLED HIM FROM THE WATER. HE WASN'T BREATHING. EMPLOYEE WAS REVIVED AND BREATHING A FEW MINUTES LATER.

EE WAS GOING BACK UP ON 9 THREE DEEK SCREEN HE HAD BEEN WORKING ON TO GET A TAPE MEASURE HE HAD LEFT UP ON THE SCREEN WHEN HE CAME BACK DOWN HE TOOK A SHORT CUT AND WALKED DOWN A CONVEYOR INST EAD OF THE STAIRWAY TO THE TOP OF THE SCREEN HE LOST HIS FOOTING AND FELL OFF THE CONV AND FELL AP 10 FT HANDING ON HIS BACK ON THE GROUND PULLING MUSCLE LOWER BACK.

CARRYING CARNICA PADS AND FELL. FELL ON WELDING ROD WHICH PUNTURED LEFT FOREARM.

MOVING PLANKS STEPPED OFF 2 FT BANK FELL BRUISING L SIDE

EMPL WALKING ON CONVEYOR,SLIPPED & FELL HURTING RIGHT SHOULDER.BELT WAS COVERED WITH ICE. CONTINUED WORKING FOR 1 WEEK AFTER FALL,THEN WENT TO DR.

EMPLOYEE JUMPED OUT OF THE BACK OF A TRUCK AFTER UNLOADING IRON. HIS RING CAUGHT ON THE RAIL OF A TOOL BOX AND CAUSED A LACERATION TO HIS LEFT RING FINGER. THE LACERATION REQUIRED SEVEN STITCH ES.

CLEANING BELT SLIPPED AND SPRAINED ANKLE.

WHILE WALKING O3 CRUSHER, LOST FOOTING FALLING 2 FT ONTO CRUHSER

CLIMBING DOWN L2ADER LADDER, SLIPPED, HIT FACE ON STEPS.

GOING TO CHECK 7O SEE IF MACHINERY WORKING, TWISTED FOOT IN SAND.

FABRICATING V B9LT ON JAW FEEDER MOVING PLATE FROM ONE IBEAM TO ANOTHER MISJUDGED STEP LEG WENT HOLE THROWING HIM OFF BALANCE DURING THE FALL RT HAND WAS SMASHED BETWEEN PLATE & IBEAM

SLIPPED ON STE1 & TURNED ANKLE.

WASHING LOADER SLIPPED AND FELL ON ROCK PILE

ASSESSING DAMAGES TO PLANT CLIMBING OVER ROCK.AVOIDED RATTLESNAKE AND FELL STRIKING ARM AGAINST CONVEYOR.

ASSEMBLING DRAGLINE AFTER MOVING TO GOLF COURSE LOCATION.

SLIPPED AND FELL ON CAT WALK,PIPE ON CAT WALK BROKE,FELL TO GROUND AND LANDED ON RIGHT SIDE.