Buscar en el registro

SLIPPED ON ICE & FELL TO HIS LEFT KNEE ON HIS WAY TO CHECK GYP HOPPER FOR FINISH MILL #2 WENT TO DR 1/9/01

WALKING TOWARD ELECRICAL OFFICE WHEN HE LOST TRACTION & FELL IN FRONT OF CONDUIT RACK. FELL ON ICEY PATH

ATTEMPTING TO SET UP LADDER TO SERVICE LIGHT ON RAW MILL SEPARATOR FLOOR OVER RAW MILL 3 SEPARATORS. LADDER CONTACTED DUST COLLECTOR PIPE AND WENT OVER CENTER STARTING TO FALL. EE WAS FOOTING LADDER AT THE TIME WHILE ANOTHER EE WAS RAISING THE LADDER. EE TRIED TO STOP LATTER AND PULLED RIGHT SHOULDER.

WALKING TO CENTRAL CONTROL BLDG. FROM THE WASHHOUSE, SLIPPED ON ICE OUTSIDE THE COOLER BASEMENT LANDED ON HIS RIGHT HAND.

WALKING BETWEEN OTIS ELEVATOR AND FINISH MILL DP BLDG., HE SLIPPED ON COVERED CLINKER AND FELL LANDING ON HIS LEFT HAND JAMMING HIS THUMB.

TRYING TO REMOVE A NOSE CASTING FROM 1 GRIZZLY, HE LOST HIS FOOTING ON CLINKER AND BREAKER STARTED ROLLING. WEIGHT OF THE LOAD SHIFTED WHILE HE WAS PUSHING ON THE CASTING, STRAINING HIS LOWER BACK.

DOWN STEPS TO RAW MILL PUMP PIT. STEPPED ON THE TRANSPORT LINE FOR RAW MILL #3 F.K. PUMP TO GET OVER TO CIRCULAR 1 F.K. PUMP. HE SLIPPED OFF AND FELL ABOUT 2; JAMMING HIS LEFT LEG.

AFTER LOADING A TRUCK AT SCALE 3, HE WALKED OUT THE PLATFORM TO SAMPLE THE LOAD. WHEN HE STEPPED ONTO THE TANKER (WHICH WAS VERY WET) HE SLIPPED AND FELL, STRIKING HIS KNEE ON THE TOP OF THE T ANKER.

GOING TO KILN 1 TIRE VALVE WHEN STEPPING OFF THE MAIN CATWALK TO GO UP THE STEPS THERE IS ABOUT A 4" DROP. WHEN FOOT HIT THE LANDING EMPLOYEE TWISTED BACK.

SETTING SK VALVUES ON LINE 2 TO THE FINISH MILL BELT. THE GRATING CAME LOOSE AND HIS FOOT SLIPPED THROUGH. THE GRATING CAME LOOSE DUE TO FLAT IRON NOT BOLTED TO SECURE PLATFORM.

STEPPING DOWN FROM SECOND LEVEL OF BLEND SILOS ONTO THE GROUND EE STEPPED ON A ROCK [4" TO 6"] WHICH MOVED UNDER HIS FOOT.

WORKING THE VENT COLLECTOR REMOVING SCREW COVER GRATINGS. MOVING FROM ONE GRAT TO ANOTHER WHEN HE LOST HIS BALANCE AND PULLED MUSCLE IN LOWER LEFT LEG.

WALKING ON HIS JOB WHEN ANKLE GAVE WAY.

INSIDE KILN #1 HOOD ON TOP OF THE PLATFORM BEING CONSTRUCTED. HEARD A CRASH. 2X12'S WERE FLYING UP IN THE AIR, KNEW SOME COATING ON THE NOSE WAS FALLING OUT. HE JUMPED OUT OF THE PREHEAT DOOR AND SUFFERED ARM INJURIES WHEN EXITING THE DOORWAY. SUFFERED KNEE INJURIES WHEN HE FELL ON THE BURNER FLOOR AFTER JUMPING OUT OF THE HOOD.

COMING DOWN LADDER AT SILO 12 WEIGH BELT WHEN HIS LEFT HAND SLIPPED OFF LADER, LEFT FOOT NOT STATIONED AND RIGHT LEG/FOOT GOT CAUGHT ON BEAM THAT SUPPORTS FEEDERS. TWISTED HIS RIGHT KNEE BEFOR E GAINING CONTROL OF FALL.

WHILE GETTING OUT OF DUMP TRUCK LOWER BACK GAVE OUT AND HE FELL TO GROUND.

LOADING TIRES ON BELT #1 AT KILN #2 & TIRE GOT STUCK. EE PUSHED TIRED & SLIPPED, FALLING ONTO BELT. CONTINUED WORKING WITH PAIN AT ELBOW. WENT TO DOCTOR 8/23/96. DOCTOR RELEASED ON RESTRICTED DUTY.

WALKING ALONG A RAIL CAR CARRYING A SHOVEL, SLIPPED ON ICE AND PACKED SNOW, HITTING HIS LEFT WRIST AGAINST THE CAR.

POKING THE DISCHARGE CHUTE FROM THE LIMESTONE CRUSHER & LIMESTONE BELT #1 AS IT WAS PACKED. USING AN ALUMINUM LADDER THAT WAS CLOSED & POKING THRU A HOLE ABOVE THE TAIL PULLEY OF LIMESTONE BEL T #2 WHEN HE SLIPPED OFF THE LADDER. HIS FOOT GOT CAUGHT IN THE RINGS & FELL ONTO HIS BACK ON THE FLOOR.

PLACING BOX OF BOLTS NEXT TO CONCRETE BARRIER & WHILE IN MOTION TO MOVE BOX, HE SLID ON STEEL MILL BALL TOWARD CONCRETE BARRIER & STRUCK HIS HAND AGAINST THE BARRIER.

WHILE GETTING OUT OF PICK UP TRUCK, WATCHMAN SLIPPED AND INJURED LEFT SHOULDER.

WHILE WALKING TWISTED LEFT KNEE IN SHOP...DID NOT SLIP.

WALKING FROM CLINKERS SILO'S TO MILL OFFICE,SLIPPED AND FELL ON ICE. PAIN IN ANKLE.

WORKING ON FUEL TANK AND DESCENDING LADDER WHEN LADDER SHIFTED EMPLOYEE FELL,LOADER RESTING ON 3'X3' PC OF METAL SHIFTED.

EMPLOYEE WAS GETTING OFF A DOZER WHEN HE SLIPPED & FELL TO THE GROUND. LEFT SHOULDER WAS SEPARATED IN THE FALL.

WALKING AROUND BUILDING AND TRIPPED OVER HIS OWN FEET.

EMPLOYEE WAS WORKING ON #2 X COAL MILL.HE WAS STANDING ON A MOTOR & WENT TO STEP OFF MOTOR OVER TO SCAFFOLD.ANOTHER EMPLOYEE STATED THAT HE WOULD PUSH THE SCAFFOLD CLOSER TO HIM.EMPLOYEE STEPP ED ON TOP OF SCAFFOLD WHICH FLIPPED UP AND EMPLOYEE FELL.

EMPLOYEE WAS GOING DOWN ELEVATOR PIT SLIPPED OFF RUNG OF LADDER AND SPUN AROUND HITTING LEFT RIBS.

EMPLOYEE WAS INSTALLING TEMPERATURE CENSOR ON A FINISH MILL BEARING. TWISTED LEFT KNEE COMING DOWN OFF THE LADDER.

EMPLOYEE WAS IN PREPARATION OF OPENING NORTH SCALES FOR BULK LOADING. HE WAS IN PROCESS OF CARRYING SAMPLE BAGS FROM 7-24-92 SHIPPING DOWN STEPS. HE MISSED LAST STEP AND FELL WITH BAGS ON HIS RIGHT ARM.

WHILE WALKING OUTSIDE SWITCHGEAR ROOM,HE STEPPED INTO A HOLE AND TWISTED HIS KNEE.HE WORE ACE BANDAGE TO WORK BUT PAID KEPT GETTING WORSE.

EMPLOYEE WAS CLEANING WITH CHIPPING HAMMER AND LOST BALANCE WHILE KNEELING. FELL FORWARD WHICH ALLOWED CHIPPED HAMMER TO FALL ON RIGHT HAND.

EE WAS WORKING INSIDE 2 VENT COLLECTOR CRAWLING ALONG SIDE OF ANOTHER EE AND LOST BALANCE, FELL ONTO TOP OF GRATING CUTTING HIS RIGHT HAND MIDDLE FINGER.