Buscar en el registro

Employee tripped on a stone and landed on back and got cuts to arm. Employee went to the ER and got looked at and got 10 stitches on the arm. Employee was released.

Employee slipped on the ice.

Employee was dismounting from loader when boot caught on bolt causing employee to loose balance and fall.

Employee was walking into office trailer when employee slipped on icy step. Employee fell and lost consciousness.

Employee was walking across scales when ee caught boot on grating causing ee to fall and hit head on side of building.

Employee was exiting from skid steer when employee rolled ankle resulting in a sprained ankle.

At the end of shift employee was walking to truck to get a wrench and stepped on uneven ground and twisted right ankle.

Employee was on the screen tower using a hose to clear a plug up of hard pack on conveyor when his foot slipped on wet surface causing him to lose his balance, but not fall. His left knee was twisted as a result. He was treated for a ligament injury and was given a brace, crutches and work restrictions.

Employee was dismounting his loader when he twisted his knee. He was using three points of contact however the step was slippery. The employee was evaluated, treated for a strain to his right lower leg and released to modified duty.

Employee was dismounting from a 980G loader and missed the last step of the ladder, resulting in a fall to the ground. He was evaluated and diagnosed with a bruised muscle in his back.

Employee states he was looking for a piece of steel on the steel rack. The area was covered in snow, he plowed and shoveled an area around the rack. When leaving the area, the employee states he caught his right foot on a pallet and fell on his right knee. He fell onto a piece of steel causing a laceration to the right knee.

Employee claims he was walking with his employees at the end of their shift back to the employee trailer. He descended a bank from the quarry road to the rail road tracks; approximately a 2.5 foot drop between the two and he lost his footing. The path was covered in snow which was packed down from use.

Sprained right ankle. Caused by employee bouncing on foot to give momentum to climb ladder into water truck cab. Ladder had been previously modified at this employee's request to make access easier.

2" pipe laying on shop floor. Miner broke right wrist.

Employee states he twisted as he was exiting out of skid steer and felt pull in leg/hip area.

EE WAS IN THE PROCESS OF CHANGING THE EXTENSION CORD TO THE VIBRATOR WHEN HIS FEET SLIPPED AND HE GRABBED THE EDGE OF THE CHUTE TO PREVENT FALL. RESULTED IN LACERATION TO EE'S RIGHT HAND AND ABRASION TO RIGHT ARM.

WHILE EXITING CRUSHER CHUTE, HE SLID 4' DOWN CONVEYOR ONTO LEFT ANKLE.

SLIPPERY WET CONDITIONS. WHILE CLIMBING DOWN FRON THE LOADER LADDER, SLIPPED CAUSING INJURY TO LEFT LEG.

GETTING INTO TRUCK, LOST FOOTING, GRABBED FOR HANDRAIL, AND METAL BUR CUT THUMB RESULTING IN 4 STITCHES.

EMPLOYEE WENT TO ENTER THE CAB OF HAUL TRUCK, MISSED DOOR HANDLE W/ HAND AND LOST BALANCE FALLING OFF OF THE TRUCK FEET FIRST. THE FALL WAS APPROX. 8' AND THE EMPLOYEE SPRAINED HIS ANKLE. THE EMPLOYEE WILL BE ON LIGHT DUTY FOR 7-10 DAYS.

FELL FROM LADDER WHILE CLIMBING TO CHECK SCREEN HEAD OIL LEVEL.

EE SLIPPED ON CATWALK WHILE PAINTING CONVEYOR GRABBED GUARD PUNCTERING HIS LEFT THUMB

AS EMPLOYEE WAS CLIMBING TO CAB OF TRUCK, HE SLIPPED WHILE HOLDING ON THE THE HAND BARS AND WRENCHED HIS LEFT ELBOW.

WHILE EMPLOYEE WAS CARRYING A DIVERTER PLATE, HESLIPPED AND CUT HIS THUMB FROM THE EDGE OF THE PLATE.

WHLE EXITING BOBCAT WITH FORKLIFT APPROACH ON, HE SLIPPED ON TIRE & PUT LEFT ARM OUT TO CATCH HIMSELF FROM FALLING. NOTE: EE DID NOT REPRT THAT HE RECD MED TREATMENT UNTIL 7/13/00

WHILE MOVING THE WATER PUMP FROM ONE END OF THE SCALES TO THE OTHER, HE LOST HIS BALANCE AND STEPPED INTO A MANHOLE CUTTING HIS RIGHT LEG.

WHILE HOOKING UP CABLES ON TOP OF CRUSHER, EE LOST FOOTING AND FELL APPROX 3-4 FEET TO THE GROUND LANDING ON HIS FEET AND BUMPED HIS HEAD.

WHILE WALKING IN YARD TO THE LOADER, HE SLIPPED AND FELL ON HIS SIDE DUE TO SNOW AND ICE.

EE WAS WORKING ON CONE CRUSHER APPROX. 4 FEET ABOVE THE PLATFORM. WHEN HE WENT TO GET DOWN, HE LOST HIS BALANCE AND LANDED HARD WITH BOTH FEET BRUISING HIS RIGHT FOOT.

WHILE EE WAS WALKING DOWN TO THE CRUSHER CARRYING A ROLL IN HIS HAND. HE SLIPPED AND FELL ON THE ICE AND BRUISED HIS RIGHT SHOULDER.

WHILE EE WAS ON BOTTOM STEP OF 980 LOADER, HE SLIPPED & FELL ONTO THE GROUND

LOST HIS BALANCE WHILE STANDING ON A LADDER PAINTING AND FELL.

DRIVER LEFT YARD FOR A 7AM DELIVERY AT PIKE INDUSTRIES, HOOKSETT, NH. HE GOT OUT OF HIS VEHICLE TO DO A TRUCK INSPECTION AND CAME DOWN ON HIS LEFT KNEE ND TWISTED IT.

54736YEE SLIPPED ON STEELE.

EE WAS REMOVING OLD STEEL OUT OF THE CRUSHER HOPPER AND WAS SETTING THE PIECE TO ONE SIDE. OUT OF THE WAY. ONE OF THE PIECES FELL OVER ONTO HIS LEG CAUSING HIM TO FALL DOWN WITH THE PIECE OF S TEEL FALLING ALSO ONTO HIS ANKLE.

EMPL STEPPED OUT OF SMALL DUMP STRUCK & SPRAINED HIS ANKLE.

EMPLOYEE'S FOOT SLIPPED OFF A LADDER AND HE TWISTED HIS KNEE.

EMPL WAS GETTING OUT OF T RUCK HE PULLED MUSCLE IN BACK.