Buscar en el registro

Employee was moving sandbags by SB-6 when he slipped and fell causing his left leg to bend underneath his body. NOTE: On Sept. 16, 2009 employee felt discomfort in his knee, went to physician and was removed from duty.

Employee was walking along on the Mezzanine Level above the offices when he tripped on floor grating and fell. He attempted to break his fall with his arm, and subsequently broke his right arm.

EMPLOYEE INJURED LEFT HAND, RIGHT ANKLE. EMPLOYEE SLIPPED AND FELL ON WET SURFACE WHILE TAKIGN SAMPLES AT THE LEACHING PAD. EMPLOYEE TRIED TO BREAK HER FALL WITH HER LEFT ARM RECEIVVING A FR ACTURE OF THE LEFT HAND.

SUPERVISOR NEEDED PARTS TO REPAIR A MACHINE. A CONTRACTOR MAINTENANCE STORAGE AREA CONTAINED THENEEDED PARTS BUT NO MECHANICS WERE ON DUTY. SUPPLY AREA WAS FENCED AND LOCKED. EMP STOOD ON 30' HIGH WORK TABLE, CLIMBED OVER FENCE, HANDED PARTS TO COWORKER. CLIMBED BACK OVER. AS HE WAS STANDING ON WORK TABLE, HE TRIPPED ON VISE AND FELL TO SHOP FLOOR,LANDING ON RT ELBOW. FRACTURE HUME

EMPLOYEE STARTED TO CLIMB LADDER ON 777C HAUL TRUCK. HE GRABBED INSTRUMENT COVER WITH RIGHT HAND (COVER WAS NOT SECURE). AS HE TRIED TO PULL HIMSELF UP, HE YANKED THE INSTRUMENT COVER DOWN WIT H HIM. HE FELL 5-6' TO GROUND & LANDED ON BACK.

EMPLOYEE STATES THAT SHE WAS STEPPING OFF THE NEXT TO LAST STEP OF A 777 HAUL TRUCK WHICH IS A SWINING STEP SUPPORTED BY 2 WIRE ROPES. HER BOOT GOT HUNG UP IN THE STEP SO SHE PULLED HER LEG F ORCEFULLY AND FELL DOWN TWISTIGN HER KNEE. DIAGNOSIS WAS A KNEE SPRAIN. EMPLOYEE WAS TREATED AT THE END OF HER SHIFT AND RELEASED TO WORK MONDAY 2-26-96. EMP DID NOT MISS TIME, MED TREAT ON

INJURED WAS BEGINING TO CLIMB DOWN FROM THE OPERATOR'S CAB OF A CATERPILLAR 777 HAUL TRUCK, USING THE MOUNT/ DISMOUNT LADDER. AS THE OPERATOR TURNED AROUND TO CLIMB DOWN THE LADDER, HIS FOOT S LIPPED OFF THE FIRST RUNG OF THE LADDER, CAUSING THE INJURED TO LOSE HIS BALANCE AND FALL TO THE GROUND. HANDRAILS WERE IN PLACE. THE HANDRAILS AND LADDER STEPS WERE FREE OF OIL AND GREASE.

AFTER INSTALLING HYDRAULIC OIL FILTERS ON A 992D,INJURED STARTED TO COME DOWN THE LADDER WOTH A SMALL FILTER BOX WITH SMALL TOOLS IN IT IN HIS RIGHT HAND.THE BOTTOM STEP WAS HALF-WAY BENT UNDE R THE LOADER.HE EITHER SLIPPED WITH HIS RIGHT ON THE BEND OR HIS WEIGHT PUSHED HIM DOWN AND HE HIT THE FLOOR WITH HIS LEFT FOOT AND FELL BACKWARD AND HIT THE BACK OF HIS HEAD ON THE BED OF A

INJURED GOT INTO SERVICE TRUCK AND SET 6' LADDER ON THE FLOOR.HE STEPPED ON THE MUDDY LADDER;THE LADDER SLIPPED FROM UNDER HIM AND HE LANDED ON HIS RIGHT SHOULDER.

SX TECH WAS ATTEMPTING TO DRAIN ORGANIC OLUTION, WHEN FOOT SLIPPED INTO THE SUMPT CAUSING ORGANIC SOLUTION TO GET INSIDE HIS BOOT.

MAINTENENCE EMPLOYEE SLIPPED IN MUD WHILE ENTERING WORK AREA STRAINING HIS LEFT KNEE. INITIAL TREATMENT FIRST AID 5/31/94. REPEAT TRAUMA REPORTED NOV. 94.

OEPRATOR WAS DESCENDING VERTICLE LADDER AFTER COMPETING WASH DOWN TASK AT THE DISCHARGE CHUTE OF THE AGGLOMERATION DRUM. OPERATOR SLIPPED FROM THE LAST RUN (APPROX 6") TWISTING HIS RIGHT ANKL E.

EE WAS ATTEMPTING TO REPAIR A SPRINKLER WOBBLER ON THE NO. 4 LEACH CELL. WHILE CROSSING OVER THE HEAD, HE SLIPPED AND FELL BACKWARD LANDING ON ARMS TO BREAK THE FALL.

EMPLOYEE TRIPPED ON A PIECE OF IRON ON THE TOP DECKING OF THE ROASTER STRUCK HIS RIGHT RIB CAGE ON A UPRIGHT BEAM AS HE FELL. X-RAYS REVEALED A FRACTURE TO THE 7TH RIB.

EMPLOYEE IS AN IRON WORKER/RIGGER. WAS MOVING ACROSS IRON AND PIPE TO INSPECT FOR CUT LOCATION IN DEMOLITION AREA/ROASTER. FOOT SLIPPED ON SCALE BUILDUP ON IRON CAUSING EMPLOYEE TO FALL APPR OX 15'. IN ATTEMPTING TO GRAP PIPE ON WAY DOWN INJURED RIGHT FORARM/WRIST.

EMPLOYEE WAS ON A PLATFORM APPROX 14" HIGH ATTEMPTING TO START A PUMP, WHEN HE STEPPED DOWN, HE STEPPED INTO A CLEAR CUT TRENCH WHICH HAD BEEN OPENED UP TO REMOVE MUD.

EE AND OTHER EMPLOYEE WERE WORKING IN THE COMMERICAL CELL SECTION OF THE ELECTROWINNING PLANT. THEY WERE INSPECTING ANODE AS EE STEPPED BACK HE FELL INTO AN OPENING IN THE WALKWAY. THE OPENING WAS CAUSED BY A PUMP COVER THAT HAD BEEN REMOVED TO GAIN ACCESS TO A PUMP. THE EMPLOYEE FELL APPROX. 10 FEET ONTO THE PIPING BELOW.

EMPLOYEE WAS WORKING IN ACID PLANT ON A PLATFORM PERFORMING WELDING WORK. HE AND HIS HELPER WERE EQUIPPED WITH RESPIRATORS. GAS WAS RELEASED FROM AN ADJACENT VESSEL IMPEDING EMPLOYEE'S VISION AND RESPIRATION. EMPLOYEE FELL TO PLATFORM BELOW AND BROKE HIS RIGHT ANKLE.

EMPLOYEE WAS STEPPING FROM THE SKIP FLATCAR TO THE 200 LEVEL STATION.HE ALLEGEDLY SLIPPED AND FELL BETWEEN THE FLAT AND THE SKIP,STRIKING HIS HEAD ON MTHE TONGUE OF THE FLATCAR.

EMPLOYEE WAS ASSIGNED TO REMOVE A PERMANENT METAL LIFTH POLE ABOUT 35' TALL. EMPLOYEE WAS HOISTED TO TOP OF THE POLE IN A MANBASKET SUSPENDED FROM A CRANE AT WHICH TIME HIS RIGGING WAS ATTACHE D TO THE POLE. THE MANBASKET WAS THEN SET DOWN AND THE EMPLOYEE THEN CLIMBED THE PERMANENT STEPS ON THE POLE TO THE TOP TO CONNECT THE RIGGING TO THE CRANE. THE POLE WAS CORRODED UNDER GROUND

EMPL WAS HELPING SCALE OPERATOR BEND CATHODES. AFTER BENDING WAS COMPLETED EMPL STEPPED BACK OFF OF SCALE PLATFORM & STEPPED ONTO GUARD RAIL. GUARDRAIL & SCALE DECK WAS WET & SLIPPERY. FRONT F OOT SLIPPED OFF & WAS CAUGHT BETWEEN TWO PLANKS.

EMPLOYEE WAS ALLEGEDLY GETTING INTO TRUCK TO SAMPLE LOAD ABOUT 3 TO 3 1/2 FT. FROM LPATEFORM TO CONCENTRATE, OPERATOR LANDED ON SIDE OF PILE WHEN HE JUMPED INTO TRUCK TWISTING RIGHT KNEE,

EMPL WAS GETTING OFF PICUP TRUCK OVER TAILGATE & TRIPPED LOST BALANCE & FELL PUUT HIS H AND OUT STOP FALL.

EMPLOYEE CLAIMS THE SOUTH DOOR OF OXIDE SHAFT CLOSED ON HIS FOOT WHEN HE SLIPPED WHILE CLOSING THE DOORS

EMPL. WAS COVERING HOLES IN WORK AREA WHEN HE STEPPED INTO HOLE HE WAS CURRENTLY COVERING, LACERATING HIS LEG.