Buscar en el registro

Employee jumped off the drive frame of the conveyor, and fell on EE's left hip.

Removing a rubber liner in valve, right pinky got pinched in the valve.

While operating a loader when EE hit EE's elbow on the arm rest when EE ran over a sand pile. Incident not reported until 5/23/26.

While lifting a cooler off the tailgate of truck, the employee stepped back and strained EE's knee.

The employee struck their finger on a piece of steel while shoveling.

While standing near a loader, the employee jumped back and twisted EE's ankle when the loader moved forward.

Employee was exiting haul truck and missed the last step, causing EE to fall.

Employee lost footing and when they grabbed the rail to steady themselves, they strained their right shoulder.

Employee was tightening a bolt on a tail pulley and once EE was done, EE noticed mild pain in right shoulder. Incident was not reported to EE's supervisor until the following week. Diagnosed with right shoulder strain and given restrictions.

Employee was in the process of dismantling a gear drive when the steel pivot base frame on which it was setting collapsed onto EE's chest.

Employee was attempting to remove snow when EE slipped and landed on their right hip.

Employee was closing the door behind employee and got finger caught in the door latch.

Employee was was working on a final drive (mobile equipment). Employee struck the housing to loosen it. A shard of metal broke off striking employee's right shin.

Employee was tightening a bolt on Crusher 2 (CR2) with a torque wrench and torque multiplier. After tightening bolt, the torque multiplier came loose and dropped. Employee reacted by attempting to catch the multiplier. The multiplier jammed employee's left hand.

The employee attempted to break up frozen clumps of sand in a hopper with their hand and while doing so, their hand twisted in an awkward position resulting in a wrist sprain.

Lifting floor grate and felt a pull in their back.

While doing some service work to a skid steer, employee was reaching into tight area of the machine to remove a hose and EE felt a pop in the front side of their right shoulder.

Employee hit a bump while driving a haul truck. As a result, the employee was jolted (was wearing seat belt) and felt pain in upper back.

EE was cleaning up the work area and went to move some jugs of fluid, approximately 2.5 gallons, when EE twisted and tweaked their back.

Employee was attempting to move a wheelbarrow, when they felt a pull in their back. EE received medical attention at a panel physician the day of the incident and was cleared to return to work with no restrictions but on follow up apt on 7/31/23, EE was put out of work until 8/2/23 when EE had their next follow up apt and was allowed to return to work but with restrictions.

Employee was finishing service job when closing engine bay door on excavator and pinched finger. Resulted in laceration to finger.

Moving a 4'x4' metal plate of off truck bed and plate slid, catching EE's finger between plate and weld equipment on truck. Fractured tip of left 1st finger.

Employee (mechanic) was changing cutting edge on 982M loader. Edge was on the forks of telehandler and employee was prying up edge with a bar to get the right side up. When the edge started to go over employee reached out to grab the edge to keep it from falling and felt a pull in EE's back. Reported immediately, but did not seek treatment until next day 3/21/23.

Bucket truck parked in front of connex, lifted bucket and traveled forward, coming in contact with connex, moving it 6". Another employee was inside of the connex hanging up a hose at the time of contact. Injured says was "thrown around", but did not fall, hit head or come in contact with anything. Next day reported rib and back pain; taken out of work until follow up appt.

Employee was walking catwalk on Primary 2 access the ladder at the bottom of the conveyor. As EE crossed a section of catwalk under head pulley of the return belt, EE stepped on a weak section of the catwalk. The weak section of catwalk gave way causing EE's right foot to break through the catwalk. Sprained right ankle; working restricted duty.

Employee was doing a plant start up at the wet plant and was shoveling wet material out from manual drop magnet/bucket elevator and felt a pull/sharp pain in lower back.

Employee notified mgr on 10/26 that EE needed to see a dr because EE's left hand has been bothering EE for a month. Employee was given anti-inflam and muscle relaxer scripts, light duty of limit use of left hand and to PT. The action of shifting from forward to reverse in loader is aggravating, so employee has been temporarily transferred to haul truck, which PT has agreed with.

Employee got finger pinched between aerial lift basket and a wall fracturing the left middle finger tip.