Search the record

Miner was entering the cab of a loader and shut EE's own hand in the door. EE received medical treatment for a DISTAL PHALANX FRACTURE of EE's right middle finger, was given a splint, and placed on modified duty.

Miner pulled himself up by grabbing onto a pipe and felt a pop in their hand.

Opened the side panel on the loader and was punctured by the edge of the panel or the handle, resulting in a 2.5 cm cut on EE's right hand in between the thumb and first finger. EE needed 3 stitches.

While lifting up on a piece of conveyor belt, miner strained their left arm. It was later determined (11/22) that their left bicep was torn, and they would need surgery to repair it.

EE was rigging something with a bridle chain, threw one leg over the load and it bounced back and the hook caught EE on EE's cheek. 5 stitches to close cut.

While removing the shaft from a head pulley, the shaft bumped miner's arm and broke the bone.

Roller shaft slipped during maintenance activity and smashed miner's thumb

While removing a troughing roller on the belt line employee pinched a finger.

Strained back while changing screens on crusher.

While descending caged ladder, SRL lanyard hook on fall protection harness became caught on ladder cage. As lanyard extended from SRL it knocked off miner's hardhat then lanyard hook dislodged falling and lacerating miner's forehead. Miner was at ground level when struck.

Employee was exerting pressure to place a block and strained their right shoulder. EE was put on modified duty and ordered to ice and rest it.

Miner was preparing to work on a crusher. Upon inspecting the crusher, EE hit head on the overhead conveyor (de-energized), which knocked off EE's hard hat. EE lurched forward to grab the hard hat and hit head on a support for the conveyor wiper which cut EE's head. EE received 5 staples from the ER. EE returned to doctor the next day and was released to full duty.

Concrete finisher was working in the area of a concrete block wall (eco blocks) when a landslide occurred causing the wall to fail. The wall fell and made contact with the workers lower leg. Worker initially declined any treatment and said was ok.

Climbing down vertical ladder off of the filter press. Employee got a sharp pain in wrist and thumb area of left hand.

Re-installing hydraulic motor on power screen with the assistance of another employee. Miner felt some pain in shoulder and sought medical attention. Miner was given 2 days off before returning to work.

While employee was changing screens on the washplant, he reached to his left for a bucket of tools.

Miner was collecting fire extinguishers in preparation for the annual inspection. The miner looked into the now abandoned wash plant control room by boosting himself up to look inside. When he did so he rested on his stomach and chest. When he did so he heard a pop. The miner finished out his day. The following Monday the miner informed us he would seek medical treatment.

Employee states he had been lifting wooden crane pads and back was strained

He told his supervisor at around 11:00am that he was experiencing back pain that had been getting progressively worse for the past several weeks. He stated that on March 26th he reached to retrieve some food from his lunch box and felt something pop in his lower back. At 13:45 he informed his supervisor he might not return to work on Monday and he was going to see his chiropractor.

Miner was doing his regular work of shoveling, cleaning, picking up parts and materials to insure a safe workplace. Worker felt pain in lower back.

Employee was setting up crushing plant. Employee was pulling heavy electrical wire over head assembly. Strained right shoulder and left leg.

Miner was unhooking lifting hook on boom truck from storage position. Miner placed right hand near shrive and when block move it caught right little finger between shrive and wire rope.

3 employees were installing a roller on a conveyor. One employee lost his grip and the injured employee tried to maintain his grip, resulting in pinching of finger between the roller and conveyor frame.

Working as a Utility man cleaning and conducting plant maintenance, the worker was removing the bottom section of a return roller guard that is hinged on one side and bolted on the opposite side. As he removed the nut securing the guard, the guard swung down and the corner struck the back of his right hand. This resulted in a laceration, requiring five stitches.

Two miners were installing a control center cover. One miner accidentally allowed the cover to slip and that pinched the other miners left index finger between the cover and the machine. This caused a laceration which required stitches.

Accident was NOT reported to Concrete Nor'West until 3/25/09. On approx. 2/25/09 EE was carrying bags of cement up a hill. On 3/20/09 he was having muscle spasms and saw a chiropractor. He saw the Chiropractor again on 3/24/09 and the doctor indicated he has compression fracture. EE informed us on 3/25/09 that he injured himself in February 2009.

Worker was pulling on a bar when the bar broke. Sudden weight shift caused worker to run back of hand across steel guard.

Miner was fabricating a support for a water tank overflow pipe. The miner removed his hard hat temporarily to put on his goggles and was shaking the goggles to remove rain water, when he accidentaly dislodged the support angle iron which struck him in the forehead.

Installing an I-beam in the shaker deck. Had to do very heavy lifting and standing in an awkward position. Strained abdomen. This incident did not become reportable until his first doctors visit on 3/24/08.

While lifting a steel grate to position it into its concrete framework the miner dropped the steel grate without first removing his fingers smashing the middle and ring finger of his right hand.

Worker was picking up a 42" troughing roller when he felt a pain in his left middle back.

Employee was pulling ladder from the rear of the service truck and felt a sharp pain in lower back. Employee first sought medical attention on May 1, 2007.

While loading old equipment onto a trailer the miner was struck by shifting equipment.

Employee was replacing a safety guard in the tunnel. Employee was lifting the safety guard and turning. Employee felt back go out.

LIFTING SCREEN CLOTH

Three people were trying to lift a large electrical panel and it slipped and fell hitting his left knee.

Incident occurred on 6/5/04 and treated as First Aid only until doctor visit on 6/21/04. Left brake caliper was partially disassembled and on mounting pedestal. He bent down to pick up a fallen Allen wrench and caliper fall off and hit top of knee.

WHILE HOLDING A 3 FOOT LENGTH OF STEEL PLATING IN PLACE TO WELD, IT SLIPPED, STRIKING LEFT EAR.

WHILE UNLOADING A CONVEYOR OFF A FLATBED, DURING LIFTING THE CONVEYOR, A 4 FOOT SECTION PIVOTED DOWN HITTING EMPLOYEE IN THE BACK.

HE WAS HOLDING THE BECKET BY IT'S EYES AND WAS TAPPING THE SHORT LENGTH OF PROTRUDING CABLE AGAINST THE DECK USING THE WEIGHT OF THE BECKET TO FORCE THE CABLE THROUGH. CABLE RELEASED AND TRAP PED 2 FINGERS.

SPRAINED LEFT KNEE WHILE HELPING ANOTHER EE POURA SLAB OF CONCRETE & WHILE LIFTING ONE END OF THE BOARD HIS KNEE POPPED & HE FELL DOWN

WORKING UNDER A LOADER WHEN SOME DEBRIE FELL IN HIS RIGHT EYE. HE WAS DOING REPAIRS TO THE LOADER AND WAS REACHING FOR 2 BOLTS WHEN THE DEBRIE FELL IN HIS EYES.

WORKING WITH 3 OTHER PERSON ON REPAIR OF TOP SHAKER DECK. SHOULD HAVE HAD 2 PERSONS ON BOTH SIDES OF SHAKER TO BALANCE IT OUT. TIGHTENING BEARING PLATE TO SHAKER BOX, WHEN THE SHAFT TURNED AND COUNTER WEIGHT PINCHED TIP OF FINGER.

EE WAS ON LIGHT DUTY AND WAS HELPING WITH GENERAL MAINTENANCE ON THE DREDGE.

EMPLOYEE WAS CLEANING OUT GRIZZLY, FINGER BECAME CAUGHT BETWEEN PRY BAR AND HAND RAILING.

CLIMBING LADDER UP TO WINCH HOUSE, STRUCK LEFT KEE ON NEXT STEP UP.

CHANGING BRAKE ROTOR ON DREDGE, ROTOR SLIPPED OFF HUB AND PINCHED FINGER AGAINST OTHER HALF OF HUB ON MOTOR SHAFT.

BROKE HIS FINGER DOING MAINTENANCE ON CRUSHER.