Search the record

Employee alleges back was strained while pulling oil cart out from under a haul truck.

Employee alleges they were climbing down a ladder and lost balance and fell down last 3 steps on to their right knee.

Employee alleges that EE was retrieving a tool from EE's truck toolbox and a strong gust of wind blew the toolbox lid shut, the lid hit a wrench causing it to fly up and cause abrasion to employee's upper lip

Employee alleges while stepping back from master control center unit, they fell to the ground and strained shoulder.

Employee alleges while stepping off of machine, left knee was strained.

Employee alleges that after a rock was pulled out, another rock rolled and injured finger.

Cable tray slipped from hand and employee tried to catch it pulling on arm.

Employee allegedly struck in head by chain causing cut on forehead.

Employee alleges left thumb was pinched between handrail and production equipment. Employee lost thumb nail and received 4 stitches.

Employee alleges EE was removing bearings and a piece of sliver steel went into EE's left hand.

Employee alleges EE was climbing on conveyor and EE grabbed the rail and crushed EE's left pinky finger.

Employee alleges they were cutting with a cutting torch and the slag ignited solvent nearby causing second degree burns to their forearms and neck.

Employee alleges EE was replacing some belts using a pipe wrench and EE missed the handle smashing EE's right pinky finger. EE received 3 stitches.

Employee alleges EE was grinding and sealing some material and some rust went into EE's left eye.

Employee utilized leverage to free a stuck part when the applied force caused the tooling to come into contact with their face.

Employee alleges EE was cutting top of belt on a conveyor with a knife and the knife slipped and cut EE's left forearm/wrist.

Employee alleges was walking from scale house to employee's work truck and heard a pop in right foot. Employee was diagnosed with a fracture to the right foot.

Employee was pulling wire by hand and heard a pop in their left wrist. Injury was reported to employer 2/7/25. Injury is musculoskeletal, muscle strain and tendon tear. Injury occurred in AM. Injury initially recorded as an OSHA injury, error identified 7/2/25 and reported to MSHA.

Employee slipped on ice near service truck. Made an attempt to stop fall by reaching for the grab handle on service truck and heard a "pop" in shoulder as employee fell holding on to the handle.

Employee alleges was climbing down from excavator and sprained left foot.

Employee alleges they were driving a man lift and they hit a rock in the road and they came down hard on their left knee in the lift.

Employee alleges they were pulling a rock out of the jaw feeder and the strap came loose hitting them in the right arm. Employee received some cut and bruises. Employee went to the Dr. on 09/16/24 and has been placed on restriction. Employee started losing time on 09/17/24.

Employee alleges EE was putting some rock breakers on and EE started feeling bad and EE passed out from heat exhaustion.

Employee alleges employee was getting ready to install a plate on a service truck and it fell and cut left pinky finger.

Employee was using a torch to make holes in the fog washer and a foreign object blew into EE''s right eye. The Dr. had to use a needle to move the foreign object out of EE's eye by the cornea. Late reporting due to communication error.

Employee alleges was moving cover bolts from a wiper motor and then EE grabbed the attach handle and fell causing a small fracture to EE's left pinky finger.

Employee alleges was lifting some small packages and as EE turned to walk, EE tripped over a small box that was in the walkway and fell to the ground bruising EE's mid lower back.

Employee alleges they were adjusting the teeth on a loader and their right hand got caught in between the fork and frame cutting the palm of their right hand. They received 5 stitches.

Employee alleges they were lifting a piece of belt unto the back of a truck and they heard their left shoulder pop straining their shoulder.

Employee alleges EE was removing a guard from a water pump the guard behind EE fell on EE's left foot. EE received a fracture to EE's foot.

Employee alleges EE was removing a belt from the primary crusher and EE smashed EE's left thumb. EE has to wear a splint while working.

Employee alleges EE was climbing up a ladder and the ladder twisted and EE lost EE's balance and fell to the ground.

Employee alleges they were grinding some material off of a table and a piece of metal blew into their left eye.

Employee alleges was closing the gate to the plant and left arm got caught in the gate cutting EE's left arm. EE received 23 stitches.

Employee was walking across production area and tripped causing injury to shoulder and arm.

Employee noticed irritation in right eye and associated it with grinding metal the previous day. Waited 1.5 days to notify management at which point EE was sent for medical on 12/15, foreign object removed from eye. Employee was wearing prescription glasses during grinding instead of Company supplied goggles.

Employee was using cutting torch and a piece of hot metal slag fell down inside employee's boot causing a burn on employee's lower leg

Employee alleges EE was lifting a screen motor to get the pin back in the hole and EE started feeling pain in EE's lower back.

Employee alleges was unloading a truck and the co-worker threw a pipe off of the truck. The pipe hit employee on their left foot.

Employee alleges the seat in the Loader was hurting their back, shoulder and neck. Employee was seen by a chiropractor to get an adjustment.

Employee alleges they were shoveling off a overloaded conveyor and right thumb hit a metal chute causing a sprain to the right thumb. They had to wear a splint for the thumb.

Employee alleges EE was walking to the back of a cone and EE slipped on a pile of rocks injuring EE's right knee.

Employee alleges employee was using a hammer to fix a hub and the hammer slipped out of employee's hand cutting left thumb. Employee received 10 stitches.

Employee alleges they were unwinding a electric pump and when they stood up, they hurt their lower back.

Employee alleges EE was removing a rock on crusher and it slipped and cut EE's middle finger on EE's left hand

Employee was doing maintenance at the plant, removing a section of catwalk. While doing so, the catwalk fell hitting EE's wrist pushing it into the hood of the scalping screen causing laceration on the outside of EE's rt wrist.

Employee alleges was lifting a hydraulic pump and felt pain in employee's back.

Employee was belt splicing when EE reached for the skiver tool by twisting backward to the right, reaching with EE's right hand/arm. Once EE had hold of tool EE realized it was hung on a piece of belting, EE started pulling and jerking to free up the tool when EE heard pop from shoulder and felt pain.

Employee alleges they were shutting down plant and kicked the clutch out of gear hitting right elbow on the ladder bolt.

Employee alleges the impact roller got caught and EE tried to release it and EE's left thumb got caught in the roller and it smashed EE's left thumb.