Mining Incidents
Muerte · Registro MSHA n.º 220172200018

Muerte de Ledgeman/Hand en Creative Stone and Steelworks (Blue Sky Quarries, Inc.), GA, 20 de julio de 2017

a las 10:13 AM

El 20 de julio de 2017 murió un trabajador (Ledgeman/Hand) en un accidente de materiales que caen/deslizan/ruedan en Creative Stone and Steelworks (Blue Sky Quarries, Inc.), GA.

Creative Stone and Steelworks · Surface · Metal/Non-Metal
Oglethorpe Condado, GA
Clasificación MATERIALES QUE CAEN/DESLIZAN/RUEDAN
Tipo Golpeado por objeto que cae

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en Creative Stone and Steelworks.

Narrativa del investigador
Cracked stone fell and crushed employee. Employee didn't follow procedure. Employee's lanyard wasn't tied off and the employee was using a foot wedge and jackhammer with 1 1/4" bit. Employee should have been using 3/4" plug drill and 5" tether and wedge. The employee was drilling from the base and should have been drilling at the top.

Texto original en inglés de la MSHA

Investigación final de la MSHA
Matthew W. Kantala IV, ledge man, age 36, was fatally injured on July 20, 2017, while performing secondary breakage operations on a block of granite. A large piece of granite broke loose and knocked Kantala off a ledge to the mine floor approximately 10 feet below. The large piece of granite hit the ledge and broke into three pieces. One of the pieces, weighing an estimated six tons, fell on Kantala. The accident occurred because the mine operator: (1) did not block material during secondary breakage operations to prevent movement; (2) did not make sure miners were using fall protection; and (3) did not conduct an adequate workplace examination –by not identifying a prominent geological anomaly in the granite and not promptly initiating appropriate action to correct such condition.
Causas fundamentales
  1. The mine operator did not block material to prevent movement during secondary breakage operations.

    Acción correctiva: The mine operator purchased new equipment and trained miners in a newly developed plan with procedures for different methods of secondary breakage. This plan addresses and requires the prevention of movement of material.

  2. The mine operator did not assure that miners used fall protection where there was a danger of falling.

    Acción correctiva: The mine operator purchased new equipment and trained miners in a newly developed plan with procedures for different methods of secondary breakage. This plan addresses and requires the use of fall protection.

  3. The mine operator did not conduct adequate workplace examinations.

    Acción correctiva: The mine operator trained miners in a newly developed plan with procedures for different methods of secondary breakage. This plan addresses workplace examinations and actions to be taken to address any hazardous conditions found.

Hallazgos del informe final de investigación de la MSHA, que sustituye la narrativa preliminar anterior.

Detalles del registro
Actividad al momento del incidente
Hand Tools (Powered)
Subunidad / ubicación
STRIP, QUARY, OPEN PIT
Tipo de accidente
Golpeado por objeto que cae
Fuente de la lesión
BROKEN ROCK,COAL,ORE,WSTE
Naturaleza de la lesión
CRUSHING
Parte del cuerpo afectada
MULTIPLE PARTS (MORE THAN ONE MAJOR)
Experiencia minera total
0 years
Experiencia en esta mina
0 years
Experiencia en este puesto
0 years
Grado de la lesión
FATALITY

Muertes relacionadas

Misma clasificación

  • July 11, 2026 · Outside Foreman · Consol Pennsylvania Coal Company LLC, PA
  • March 3, 2026 · Cement Worker · North American Silica Sand, LLC, TX
  • January 19, 2026 · Ledgeman/Hand · Vermont Quarries Corp., VT
  • May 1, 2025 · Rotary Bucket Excavator Operator · Iron Oak Atascosa LLC, TX
  • January 3, 2025 · Utility Man · WES AGG, LLC, TX

Mismo año

Verificar en MSHA

Cada registro de esta página refleja lo que publica la MSHA en su programa de Datos Abiertos del Gobierno, actualizado semanalmente. La MSHA no publica URLs por accidente (los datos de Accidentes se distribuyen en un único archivo masivo), así que esta es la forma de recuperar la fuente del registro específico a continuación:

Fuente: Administración de Seguridad y Salud Minera de EE. UU. (MSHA) · Documento 220172200018 · ID de mina 0901147 Vista de capacitación →