Dryer Operator

The injured miner & the supervisor were attempting to light the #2 kiln's gas flame. While the miner was holding a flare attached to a metal pole at the end of the gas pipe, the supervisor turned on the gas. In the process of lighting, the gas ignited & blew back through the front of the kiln causing burns to the right side of the miner's body. On 5/28/18 the EE passed away.

Texto original en inglés de la MSHA

Benjamin Ballard, a 27-year old Kiln System Technician with 32 weeks of experience, received severe burn injuries while igniting natural gas to pre-heat a rotary kiln on May 9, 2018. Ballard used a standard road flare attached to the end of an angle iron rod to manually light the kiln while his supervisor adjusted the gas valve. The first attempt to light the kiln failed. During the second attempt, fire blew out of the kiln access door (blowback) injuring Ballard. Ballard was transported by helicopter to an emergency burn center. He died on May 28, 2018, as a result of his injuries. The accident occurred because the mine operator: Did not ensure that the natural gas was purged after the initial lighting failure. Did not ensure the victim had been properly task trained in lighting kilns. Did not provide proper personal protective equipment and clothing for lighting kilns Did not have safe procedures in place for lighting the kiln.

1. The operator’s procedures for kiln lighting did not address purging after flame failure and did not specify a maximum time the secondary gas valve could remain open while attempting to light the kiln. This resulted in natural gas accumulating in the kiln chamber.

   Acción correctiva: The mine operator implemented new procedures that require purging after flame failure. The new procedures also specify the maximum time the secondary gas valve can remain open when attempting to light the kiln. The length of time the gas valve is open is not to exceed 15 seconds. All affected miners have been trained in these new procedures.

2. The mine operator did not ensure the victim was properly trained in the task of lighting kilns.

   Acción correctiva: All affected miners have been task trained in new kiln lighting procedures.

3. Proper PPE and clothing were not required to be used while lighting the kiln.

   Acción correctiva: Proper PPE and clothing have been provided and are required to be worn when lighting the kiln. This PPE includes an arc flash protective suit with hood and leg extensions, heat resistant gloves, safety glasses, and steel-toed boots.

4. The mine operator’s procedures required miners to be positioned in front of an open kiln access door while lighting the kiln.

   Acción correctiva: The mine operator developed procedures that require the miner to insert a rod with lit flare through a tube that extends into the chamber. The rod is clamped in place and the miner moves to a safe location before gas is applied. The kiln access door remains closed. (See APPENDIX C – Kiln #2 Modification)

Hallazgos del informe final de investigación de la MSHA, que sustituye la narrativa preliminar anterior.

Actividad al momento del incidente

Machine Maintenance

Subunidad / ubicación

MILL OPERATION/PREPARATION PLANT

Tipo de accidente

Contacto con objetos o sustancias calientes

Fuente de la lesión

FLAME,FIRE,SMOKE,(Not Elsewhere Classified)

Naturaleza de la lesión

BURN OR SCALD (HEAT)

Parte del cuerpo afectada

MULTIPLE PARTS (MORE THAN ONE MAJOR)

Experiencia minera total

0 years

Experiencia en esta mina

0 years

Experiencia en este puesto

0 years

Grado de la lesión

FATALITY