Outside Foreman
On March 22, 2016 at approximately 6:35pm an employee was struck by flyrock after a shot was detonated. The employee was sitting inside of a pickup approximately 1,200 feet away from the shot when detonated. This incident resulted in a fatality.
Texto original en inglés de la MSHA
Tracy L. Hockemeier, Leadman, age 42, was fatally injured on March 22, 2016, when he was struck by fly rock during blasting operations in the Winterset section of Plant 862. Hockemeier was sitting in a pickup truck, approximately 1,200 feet from the blast site, preventing others from entering the blast area. When the blast was initiated, fly rock was propelled upward, landing on and penetrating the roof of the truck and striking the victim. The accident occurred as a result of multiple factors, including geology of the blast area, the condition of and loading of blast holes, and failure to communicate between the mine operator and contractor blasters. The mine operator and contractors failed to ensure that the blast area was cleared, or adequate shelter taken, prior to initiating the shot. The victim was not task trained for evaluating blast area clearance or blasting procedures.
-
Management’s policies, procedures and controls failed to adequately assess the geology or material to be blasted; blast pattern, burden, depth, diameter, and angle of the holes; historical blasting experience at this mine; delay system, powder factor, and pounds per delay; type and amount of explosive material; type and amount of stemming and their inter-relationship with each other in properly determining the blast area.
Acción correctiva: Management established updated blasting policies, procedures and controls to ensure persons are not exposed to fly rock. Management trained all affected mine employees so that that mine supervision and blasting personnel have better communication regarding variable blasting pattern conditions and avoid fly rock potential.
-
Management’s policies, procedures and controls failed to ensure the blasting contractor complied with applicable mandatory standards of adequately assessing the potential for fly rock, by failing to communicate geological conditions effectively. Information regarding which drill holes were unloadable as a result of mud seams or voids encountered in the drilling and loading process, the geological conditions, and water infiltration of holes would have provided critical knowledge to warrant an expanded security area for the blast.
Acción correctiva: Management established updated blasting policies, procedures and controls to ensure persons are not exposed to flyrock. Management trained all affected mine employees so that that mine supervision and blasting personnel, including contractors, have better communication of variable blasting pattern conditions and reduce fly rock potential.
-
Hockemeier was not task trained to assess the geology or material to be blasted; blast pattern, burden, depth, diameter, and angle of the holes; historical blasting experience at this mine; delay system, powder factor, and pounds per delay; type and amount of explosive material, type and amount of stemming and their inter-relationship with each other in properly determining the blast area so persons were not exposed to flyrock.
Acción correctiva: Management established updated blasting policies, procedures and controls to ensure persons are not exposed to fly rock. Management established policies to train persons to properly assess blast sites and trained all affected mine employees so that that mine supervision and blasting personnel have better communication of variable blasting pattern conditions and reduce fly rock potential.
Hallazgos del informe final de investigación de la MSHA, que sustituye la narrativa preliminar anterior.
- Actividad al momento del incidente
- Observe Operations
- Subunidad / ubicación
- STRIP, QUARY, OPEN PIT
- Tipo de accidente
- Golpeado por objeto proyectado
- Fuente de la lesión
- BROKEN ROCK,COAL,ORE,WSTE
- Naturaleza de la lesión
- CRUSHING
- Parte del cuerpo afectada
- HEAD, MULTIPLE PARTS
- Experiencia minera total
- 6 years
- Experiencia en esta mina
- 0 years
- Experiencia en este puesto
- 0 years
- Grado de la lesión
- FATALITY
Cada registro de esta página refleja lo que publica la MSHA en su programa de Datos Abiertos del Gobierno, actualizado semanalmente. La MSHA no publica URLs por accidente (los datos de Accidentes se distribuyen en un único archivo masivo), así que esta es la forma de recuperar la fuente del registro específico a continuación:
- Informe final de investigación: Lee el informe final de la MSHA
-
Registro del accidente:
Descargar MSHA Accidents.zip
luego busque el número de documento
220160890010(la clave única por Formulario MSHA 7000-1) -
Registro de la mina:
Sistema de Recuperación de Datos de Minas de la MSHA
y busque por ID de mina
1302123 - Todos los conjuntos de datos de la MSHA: Directorio del programa de Datos Abiertos del Gobierno que cubre Accidentes, Minas, Inspecciones, Infracciones, etc.