Registro de la MSHA sobre AZEVEDO QUARRY (ID de mina 0404131). Muertes, incidentes no mortales agrupados por año, operador y controlador actuales, y contexto de la mina.
Avísenme cuando se presente un nuevo incidente de la MSHA en AZEVEDO QUARRY.
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2000 Q2 | 3,266 | 0 | 0 | 0.0 |
| 2000 Q1 | 1,294 | 0 | 0 | 0.0 |
THIS INJURED INDIVIDUAL WAS A TRESPASSER IN A MOTORCYCLE. REPORT IS MADE AS RECOMMENDED BY FIELD OFFICE. REPORT WAS NOT FORWARDED EARLIER BECAUSE THE FIRE DEPT TOOK THIS LONG TO PRODUCE A REPO RT. SEE ATTACHED REPORT: INJURED STATED HE POPPED A WHEELIE ON MOTORCYCLE GOING ABOUT 20 MPH AND STEPPED OFF OF BIKE LANDING ON LT LEG. TIBIA AND FIBULA FRACTURE.
WHEN WORKING ON REMOVING ASPHALT AND CONCRETE FROM PLUGGED UP CRUSHER, CONCRETE BEING REMOVED PIECE OF 2X1' BROKE AND CRUSHED LT HAND INDEX AND MIDDLE FINGER.
EMPLOYEE WAS ENTERING QUARRY TO START HIS SHIFT,BUT INSTEAD OF ACCESSING THROUGH THE MAIN GATE, EMPLOYEE JUMPED THE FENCE, SUFFERING A LACERATION ON HIS SMALL FINGER ON HIS LEFT HAND.
EE WAS CHANGING BERAING IN A CONVEYOR BELT AND RECEIVED A VERY MINOR CUT WHEN HE LEANED ON THE METAL OF THE FRAME.
EE WAS MOVING A FREQUENCY CONTROLLER AND CAUGHTFINGER AND BROKE IT.
HE WAS ADJUSTING METERING SCREW WHEN HE CUT HIS 5TH FINGER (PINKY) RIGHT HAND WITH METAL.
MEN COMPLAINED OF GROIN PAIN.
EMPLOYEE WAS REMOVING BLOCK CHOCKED TIME WHEN HE PULLED (STRAINED) RIGHT ARM.
EE WAS TRIMMING A CONVEYOR BELT TO FIT IT. WHEN THE TRIMMING KNIFE HE WAS USING SLIPPED & CUT LEFT WRIST.
EE WAS CLEANING HOPER BOX WITH STEEL BAR ATTEMPTING TO REMOVE SOME MATERIAL (AGGREGATE), WHEN HECAUGHT INDEX RIGHT HAND FINGER BETWEEN BAR & BOXAND COMPRESSED FINGER.
EMPLOYEE OPENED DOOR TO CONTROL HOUSE AND FELT PAIN ON LEFT SHOULDER/BACK.
EE WAS RETURNING TO HIS STATION AND TRIPPED AND FELL ON HIS LEFT KNEE. HE COMPLAINS OF LOWER BACK PAIN. HE TRIPPED W/RE-BAR ON THE GROUND.
EE WAS WALKING TO ASSIST WORKERS REMOVING DEBRISACCUMULATED ON TOP OF SCREEN, WHEN A ROCK WAS THROWN FROM THE TOP OF THE SCREEN TO THE GROUND & HIT EE ON THE HEAD (HARD HAT).
HE WAS PICKING UP A BAG OF CEMENT FROM PILE OF RECYCLABLE CONCRETE WHEN THE WIND BLEW DUST IN HIS EYES.
EE IN COMPANY OF COWORKER WERE INSTALLING A WATER PUMP CLUTCH WHEN THE CLUTCH SLIPPED FROM COWORKER'S HAND AND TURNED EE'S BODY WITH A HORIZONTAL ROTATION AND STRAINING HIS LOWER BACK.
EE WAS CLIMBING STAIR TO CLEAN CONE SILO WHEN A ROCK FELL ON HIS HAND.
EMPLOYEE WAS PULLING ON SKIRT BOARD AND CUT BACKOF THE HAND WITH METAL BUR ON SKIRT BOARD.
EMPLOYEE WAS WORKING WITH A WRENCH ATTEMPTING TO LOOSEN A NUT AND THE WRENCH SLIPPED AND THE HIT HIMSELF IN THE MOUTH.
THE EMPLOYEE WAS HAMMERING ON A PUNCH TO REMOVE BOLT FROM CONVEYOR BELT WHEN A SMALL PARTICLE *PIECE) OF PUNCH CAME LOOSE AND PENETRATED LEFT LEG JUST ABOVE KNEE.
THE EE WAS HELPING RELOCATE A WATER TANK AND STRAINED THE RIGHT SHOULDER.
EE WAS USING CUTTING TORCH ON SUPPORT FRAME OF JAW CRUSHER. HOSES WERRE CAUGHT ON FRAME WHEN MOVING TO NEW LOCATION, TORCH HEAD PULL OUT OF HANDS AND SKIDDER ACROSS THE TOP OF EE'S LEFT ARM.
RING CAUGHT MIDDLE FINGER BETWEEN CRUSHER.
EMPLOYEE WAS CLIMBING UP LADDER OF LOADER AND SLIPPED PULLING RIGHT ARM.
EMPLOYEE BUMPED KNEE WHILE WORKING AROUND CONE CRUSHER.
EMPLOYEE WAS MOVING A BOX AND THE BOTTOM FELL OUT AND CONTENTS FELL ON RIGHT FOOT.
EMPLOYEE WAS PRYING IWTH CROW BAR AND FELT PAIN IN LOWER BACK.
BENT OVER TO PICK UP OBJECT.
EE WAS PREPARING TO LACE CONVEYOR BELT. BELT WAS BEING PULLED INTO POSITION WHEN THE VISE GRIP SLIPPED OFF HITTING EE IN MOUTH.
USING IMPACT WRENCH HAMMER TO REMOVE BEARING AND SOCKET BROKE PC OF SOCKET HIT EMP ON RT THUMB
EMPLOYEE WAS LIFTING BELT GUARD,USING PRY BAR.
EMPLOYEE WAS EXITING TRUCK & HIT LEFT ELBOW ON DOOR FRAME CAUSING IMMEDIATE SWELLING & PAIN
EMPLOYEE WAS OPERATING D8-L DOZER ON THE HILL AT AZEVEDO QUARRY.EMPLOYEE SAYS HE FELT PAIN IN THE LOWER BACK AND LEGS.AFTER AWHILE THE EMPLOYEE SAID THE PAIN WAS SEVERE AND COULD NOT REMAIN ON THE DOZER.EMPLOYEE LEFT WORK.
EMPLOYEE WAS PERFORMING MAINTENANCE ON A LOADER HE WAS ON THE FRONT OF THE EQUIPMENT & WAS GETTING DOWN AS HE STEPPED OFF THE BUCKET HE LOST HIS FOOTING ON AN UNEVEN PIECE OF GROUND & TWISTED HIS LEFT ANKLE
EE STATES HE WAS ATTEMPTING TO REINSTALL BOLTS INTO AN A.R. PLATE. WHEN HE HIT THE BOLT WITH A HAMMER, A PIECE CHIPPED OFF AND EMBEDDED IN HIS UPPER LIP.
EMPLOYEE STATES HE WAS CHANGING CUTTING EDGES ON 988 LOADER AND STRAINED HIS BACK WHILE LIFTING EDGE TO BE BOLTED.
EMPL WAS SEPARATING WIRE CLOTH SCREENS. FEET BECAME ENTANGLED CAUSING HIM TO FALL. RIGHT ARM WAS CUT ON ANOTHER SCREEN AS HE FELL TO GROUND.
PULLING NEW ROLL OF BELTING ONTO CONVEYOR,EMPL STRAINED HIS BACK.
EMPLOYEE WAS WORKING ON EQUIPMENT IN A VERY SMALL AREA WHERE A PROPER POSITION FOR LIFTING WAS NOT POSSIBLE EMPLOYEE WAS WORKING ON A SCREEN UNIT AND STRAINED HIS LOWER BACK WHEN LIFTING
A LARGE ROCK HAD JAMMED ON THE CONVEYOR EMOPLOYEE WAS ATTEMPTING TO DISLODGE THE ROCK WITH A 6 FT BAR TO FREE UP MOVEMENT OF THE FEEDER SUDDEN JERKS AND MOVEMENTS WITH THE BAR CAUSED PAIN IN T HE RIB CAGE
WHILE BUILDING A MATERIAL CHUTE OVER A TRANSFER CONVEYOR AT THE RECYCLE PLANT.EMPLOYEE WAS LIFTING CHUTE INTO PLACE TO BE WELDED..
OPERATOR WAS DRIVING A WATER TRUCK OVER ROUGH TERRAINE.
EMPLOYEE WAS LIFTING A SCREEN FRAME DURING MAINTENANCE WORK AND STRAINED HIS BAK NCE WORK
EMPL REMOVING P6LLEY FROM 20 HP MOTOR AND SMASHED THUMB.EMPL WENT TO HOSPITAL FOR TREATMENT AND RETURNED TO WORK SAME DAY.
EMPLOYEE WAS CH5NGING LACING CONVEYOR BELT #6310 AND CUT HAND.
EMP WAS REMOVIN1 FEED PLATE FROM CRUSHER AND DROPPED FEED PLATE HITTING LEFT ANKLE. BRUISED LEFT ANKLE. LOST GRIP ON FEED PLATE WHILE REMOVING SAME FROM CRUSHER
EMPLOYEE WAS WA5KING UP CAT WALK TO CONTROL PANEL. HE SLIPPED AND FELL, HITTING ELBOW. SUSTAINED A CUT ELBOW.
EMPLOYEE WAS RE1AIRING GREASE LINES ON CONVEYOR BELT AND LACERATED HIS FINGER.
AFTER CUTTING P3ECE OF WIRE ROPE, HE REMOVED HIS SAFETY GLASSES,PUT TORCH AWAY AND HIT ROPE WITH HAMMER AT WHICH TIME A PIECE OF IRON,WHICH WAS STILL HOT,HIT HIS EYE.HE WENT TO SANTA TERESA HO SPITAL EMERGENC2 FOR TREATMENT AND WAS REFEERRED TO AN EYE DOCTOR.
EMPOYEE WAS MOV3NG MATERIAL IN A 980 LOADER FROM THE TOP OF HILL DOWN TO STOCK PILE.THE ENGINE DIED ON THE LOADER AND LOADER ROLLED DOWN SLOPE AND WENT OFF SIDE OF EMBANKMENT HITTING A W.S.P. TRUCK.SOME OF 7HE MATERIAL WAS THROWN OUT OF THE BUCKET ON THE LOADER AND LANDED ON THE EMPLOYEE.EMPLOYEE SUFFERED TORN LIGAMENTS AND BRUISES ON LEGS.
EMPLOYEE WAS CL9ANING OUT CHUTE ON PIONEER JAW CRUSHER & HE SLIPPED & CUT THUMB
EMPLOYEE WAS AT7EMPTING TO TORCH CUT SOME IRON WHILE STANDING ON A LADDER.THE LADDER BROKE CAUSING EMPLOYEE TO FALL AND CAUSED LACERATION TO LEFT ARM WHICH REQUIRED SUTURES.
EMPLOYEE WAS UN5OADING 40' TRAILER,RIGGING CABLES FOR CRANE.HE SLIPPED AND LOST BALANCE THUS INJURING HIS KNEE WHEN HE FELL.STRAINED HIS KNEE.
CLEANING OFF DE6RIS ON SCREEN AT RECYCLE PLANT AND EMPLOYEE INJURED HIS FINGER.HE BROKE HIS FINGER.
WORKING ON SCRE9N #6089 AT PLANT 119500,CLEANING IT OFF AND EMPLOYEE SLIPPED AND FELL ONTO THE GROUND.EMPLOYEE INJURED HIS KNEE AND WENT TO HOSPITAL FOR TREATMENT.
EMPLOYEE WAS WO9KING ON CONVEYOR #6360 WITH GRINDER ATTEMPTING TO GRIND HEAD PULLEY.HE WAS WORKING IN A TIGHT AREA.THE GRINDER JUMPED WHEN IT HIT A BURR AND CAME AROUND AND CUT EMPLOYEE'S ARM. LACERATION ON A9M.
I.NAME CLIMBED DOWN OFF OF LOADER #6721 TO AIDEK I.NAME IN LIFTING CRIBBING SO AS TO LOWER 51/2FT CONE MANTLE ONTO THEM AFTER HELPING DO SO I.NAME RETURNED TO HIS LOADER & COMPLETED DAY & FOLL OWING TWO WEEKS AFTER THIS TWO WEEK PERIOD HE COMPLAINED THAT HE INJURED HIS BACK WHILE HELPING I.NAME DID NOT WANT A REPORT OR TO SEE A PHYSICIAN
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.