MIN-AD Inc: 140 citaciones de la MSHA Metal/Non-Metal

While working to remove the base of the ore feeder, employee was fitting the slidebase into place to remove the feeder base, the slidebase twisted and pinched employee's ring finger on the left hand between the two pieces of metal causing the tip of the finger to become broken and cut.

Hearing Loss - Confirmation of the reportable hearing loss.

Employee tripped over his own foot walking up steps over a secure walk way causing him to fall and fracture his left wrist.

Employee was outside talking with the operations superintendent. The employee was wearing glasses when the wind blew material into his eye. He washed it out immediately. He did not go to the hospital until the next day when he realized the material was still in his eye and that his eye was still irritated.

THE EE WAS LIFTING UP ONE END OF A REPLACEMENT AUGER TO SLIDE IT INTO THE BUCKET OF THE SKIDSTER. WHILE LIFTING THE END OF THE AUGER, THE EE HEARD A POPPING NOISE AND FELT PAIN IN THE RT. SHOULDER.

THE E WAS REMOVING A BOTTOM CLAMP RING FROM A PIECE OF EQUIPMENT WITH A RATCHET. THE RATCHET SLIPPED AND STRUCK HIM IN THE MOUTH, CAUSING A FRACTURE TO HIS TWO FRONT TEETH.

WHILE HAMMERING BOLTS DOWN ON STEDMAN A PIECE OF METAL BROKE FREE EMBEDDING ITSELF IN LEFT HAND BETWEEN FORFINGER AND MIDDLE FINGER.

WAS COMING DOWN LADDER FROM TANKS AND STEPPED WRONG TWISTING ANKLE.

EMPLOYEE REPOSITIONED A STEDMAN RING ON THE WELDING TABLE WHEN HE LET IT GO, IT TIPPED AND WAS FALLING OFF THE TABLE WHEN HE ATTEMPTED TO CATCH IT. JOHN'S KNEE DISLOCATED TO THE SIDE AND WENT BACK INTO PLACE.

EE WAS STANDING, TALKING ABOUT A PROJECT WHEN HE STEPPED BACK CAUSING A PIECE OF SQUARE TUBING TO SLIDE OFF A STACK HITTING HIM IN THE BACK OF THE FOOT. NOTE: EE DID NOT SEEK MEDICAL ATTENTION UNTIL 1-5-99.

EE WAS PUTTING A BAG ON A PALLET WHEN HE RECEIVED A SHARP STABBING PAIN IN HIS UPPER BACK.

EE WAS ROLLING CRUSHER CAGAE OUT OF SHOP ON UNEVEN GROUND. EE WAS BESIDE THE CAGE WHEN IT TIPPED OVER, KNOCKING EE [DOWN] & LANDING ON HIS LEG.

EMPLOYEE WAS USING A BAR TO TRY AND CLOSE THE #2GATE ON THE RAIL CAR FEED WHEN THE BAR SLIPPED HITTING EMPLOYEE IN THE RIGHT WRIST.

WAS GOING TO GET 922 CAT LOADER AND JUMPED OVER HANDRAIL AND LANDED WRONG.

WAS GRINDING ON STEDMAN WHEEL AND SOMETHING GOT IN THE RIGHT EYE. RUSTED, SORE, AND SWOLLEN.

EMP REPORTED THAT WHILE STACKING PALLETS LEFT SHOULDER BEGAN HURTING.

STEPPING OVER AUGER AND STEP WOBBLED CAUSING EE TO FALL AND TWIST ANKLE.

HAMMERING ON LOCK NUT. NOTE: EE CAME TO WORK ON HIS OWN ACCORD ON 6-8-96, AND WORKED FOR 2 HOURS.

WALKING OVER TO CHECK PIPE TO AUGEER AND SLIPPED ON ICE, CAUSING EE TO TWIST BACK.

BEING IN A HURRY & NOT WAITING FOR EQUIPMENT TO COME MOVE WELDER. NOTE: EE HAS NOT ANY TIME DUE TO THIS INJURY UNTIL 03-06-96.

WAS CLIMBING LADDER TO ADJUST TARP LOST FOOTING AND FELL BACK.

EMPLOYEE WAS WELDING METAL ON ELEVATOR AND THOUGHT SHIELD WAS DOWN WHEN HE ACCIDENTLY FLASHED HIMSELF.

EMPLOYEE WAS MOVING CHANNEL IRON TRACK WHEN IT SLIPPED OUT OF HER HANDS AND FELL JUST BEHIND TH ESTEEL TOE OF HER BOOT.

HE WAS PICKING UP PALLET AND TURNED WRONG.

A CO-WORKER HAD 8- 4X8 SHEETS OF STEEL PLATES FALL ON HIM. HE BECAME EXCITED AND LIFTED THE SHEETS OFF. IN DOING SO, HE STRAINED HIS BACK.

EMPLOYEE WAS ATTEMPTING TO GET A 4' X 8" X 1/4" STEEL PLATE FROM A RACK WHEN THE BRACES BROKE. 8 SHEETS FELL ON HIM, KNOCKING HIM TO THE GROUND AND PINNING HIM. HE RECEIVED A CRACKED PELVIS AN D A BROKEN FINGER.

USING LOADER TO INSTALL SMALL ORE STORAGE TANK FRAME. FOREMAN NOT AWARE OF DOWN SPOUT THAT WOULD BE IN WAY, AS FRAME HIT PIPE, TIRE ON LOADER MOVED AND HIT GUY LINES CAUSING THEM TO DISLOAD HI TTING EMPLOYEE IN LEFT LEG.

CHANGING CONNECTION SCREW AUGER NOT USING LIFTING DEVICE SET FOR THAT PURPOSE.

PERSON WAS BAGGING 50# MAT. MOVING PALLET BY SELF EMPTY PALLETS PLACED ON CONT WERE TO HEAVY FOR 1 PERON STRAINING SMALL OF BACK.

WORKING ON CAGE MILL, CHIP HIT IN R EYE OTHER EMP USING CHIPPING HAMMER

EMPLOYEE WAS TIGHTENING BOLTS ON STEDMAN CAGE WITH 1 5/8" SOCKET.HE WAS PUTTING MOST OF HIS WEIGHT ON THE BREAKER BAR.WHEN THE SOCKET SLIPPED OFF THE NUT THIS CAUSED HIM TO PUT MOST OF HIS WEI GHT ON HIS RIGHT ANKLE CAUSING EXTREME PAIN TO IT.

EMPLOYEE WAS WALKING ON CROSS OVER WALK WHEN HE CATCH IS RIGHT RING FINGER BETWEEN HAND RAIL & I-BEAM.

REPAIRING AIR LINES,EMPL SLIPPED ON TOP OF COVERED AUGER.TRYING TO STOP FALL,PUT OUT LEFT HAND BREAKING BONE IN HAND.

LOADER WAS OVER HEATING EMPLOYEE WAS ATTEMPTING TO RELEASE CAP ON RADIATED TO FIRST NOTCH BUT INSTED TOOK IT TO FAR. STEAM HIT HIS FACE, FOREHEAD.

LOADING TRUCK W/BULK BAGS USING PIPE 2" ON FORKS STRAP BROKE RETEASING PIPE. HITTING MAN ON RT SHOULDER ON UPPER ARM.

INSTALLING CAGE INTO STEDMAN CAGE MILL WHEN TRYING TO TO PLACE BOLT CAGE SLIPPED BROKEN FINGER W/LARGE CUT.