A large rock fell off of conveyor belt and became lodged on the top of the underside return belt. Conveyor belt turned off and injured worker tried to remove rock. The rock rolled while attempting to remove the rock from the conveyor. The rock compressed left index finger against conveyor support. The result was a laceration to the left index finger.
Canton Aggregates C1 Metal/Non-Metal
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Canton Aggregates C1.
- Muertes
- 0
- Incidentes totales
- 10
- Años en registro
- 2000–2020
- Último incidente
- Jun 2020
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 3,075 | 0 | 0 | 0.0 |
| 2025 Q3 | 6,727 | 0 | 0 | 0.0 |
| 2025 Q2 | 6,289 | 0 | 0 | 0.0 |
| 2025 Q1 | 2,855 | 2 | 0 | 700.5 |
| 2024 Q4 | 4,376 | 0 | 0 | 0.0 |
| 2024 Q3 | 6,032 | 0 | 0 | 0.0 |
| 2024 Q2 | 6,222 | 0 | 0 | 0.0 |
| 2024 Q1 | 2,628 | 0 | 0 | 0.0 |
Incidentes reportables
10 en archivo2020 · 1 incidente
2018 · 1 incidente
The Injured Worker(IW)was kneeling on the ground next to a I-beam(A) that measured 15'(long) by 15"(height) and had a 6" flange. IW was welding plate onto the I-beam(A). Two workers were moving a like sized I-beam(B) next to I-beam A. I-beam B struck I-beam A causing I-beam A to fall onto IW. The impact caused a fracture to the left fibula.
2017 · 1 incidente
Injured Worker(IW) was changing screens in vibratory screen deck. IW was laying on screen media while using a pry bar to remove screen from fastening rail. The pry bay slipped from under screen media and opposite end struck IW in the forehead.
2016 · 1 incidente
The injured worker (IW) was moving cribbing material for a feed hopper for sand and gravel. IW had placed cribbing material into bucket of front-end loader. IW stepped backward and away from loader when EE tripped over cribbing material laying on ground nearby.
2010 · 2 incidentes
Employee was repairing a chute liner in the gravel plant. While performing the repair work, particles from overhead fell upon the employee. A particle became embeddded in the employee's left eye.
Three employees were turning over a piece of plate steel. A miscommunication caused one employee to get his right middle finger pinched between the plate steel and the burning table.
2005 · 1 incidente
New splice to conveyer belt was being installed splice was finished and clamp was being removed. Other employee removed bolt holding splice and released underside of clamp. Underside of clamp dropped and caused a pinching action at other end. Injured's finger was caught between clamp.
2001 · 2 incidentes
INDIVIDUAL BENT OVER TO PICK UP A GREASE GUN. INDIVIDUAL FELT6 A SHARP PAIN IN LOWER BACK. INDIVIDUAL COULDN'T STRAIGHTEN BACK UP (STAND UPRIGHT) FOR ABOUT 5 MINUTES.
INDIVIDUAL WAS ASSIGNED TASK OF REMOVING SCREEN CLOTH FROM VIBRATING SCREEN DECK, WHILE ATTEMPTING TO REMOVE NUT, HE LEANED TO RIGHT FOR ADDED LEVERAGE. HE PULLED ON WRENCH WITH BOTH HANDS AN D THEN FELT A POP IN HIS SHOULDER.
2000 · 1 incidente
EMPLOYEE WAS INVOLVED IN PLANT MAINTENANCE REPAIR. WAS REPLACING RUBBER SCREEN CLOTH IN VIBRATORY SCREEN DECK. WINDY CONDITIONS EXISTED AND CAUSED DUST TO BE AIR BORNE. DUST PARTICLES WENT INT O EYE. TREATMENT WAS IMMEDIATELY GIVEN TO FLUSH OUT EYE. SUBSEQUENT IRRITATION THE FOLLOWING DAY.