Avísenme cuando se presente un nuevo incidente de la MSHA en Driscoll Hollow Strip Mine.
EE WAS FILLING THE WATER TRUCK WITH A HOSE WHEN HE SLIPPED ON SOME LOOSE MATERIAL AND TWISTED HIS LEFT KNEE.
EE WAS REPAIRING A HOSE ON A 988B. HE WAS STANDING ON A LADDER LOOSENING A HOSE WHEN HE SLIPPED OFF THE LADDER AND FELL APPROX. 4-5' STRIKING HIS RIBS ON A STEEL PLATE. \
THE EE WAS DIGGING MUD AND DIRT OUT OF THE BELLY PAN OF THE G-1000 GRADALL MACHINE #571. HE CAUGHT HIS HAND ON A SHARP PIECE OF METAL THAT WAS STICKING DOWN ON THE BELLY OF THE PAN. HE WAS WEA RING GLOVES AT THE TIME OF THE INJURY. HE RECEIVED 3 STITCHES AND A TETANUS SHOT FOR MEDICAL TREATMENT.
EE WAS DOING NAINTENACE ON A 988B LOADER, ALONG WITH A MECHANIC, REMOVING THE PINS FROM A DUMP CYLANDER WHEN THE PIN WAS REMOVED, THE BELL CRANKROCKED BACK CRUSHING THE EE'S FINGER AGAINST THE DUMP CYLANDER. EE RECD X RAYS, STITCHES AND ALSOSAW A PLASTIC SURGEON.
WORKING ON A 988 B CAT LOADER FIXING HYDRAULIC HOSE LEAK. SOMETHING FELL INTO HIS EYE.
EMPLOYEE WAS REMOVINGA GRILL GUARD ON THE RADIATOR OF A 992C LOADER. WHEN BOLTS WERE REMOVED, THE GRILL SLID DOWN & LANDED AN EMPLOYEES FOOT.
OPERA TING WABCO ROCK TRUCK THE EMPLOYEE LOADED HIS TRUCK WITH COAL & WAS PULLING AWAY FROM PIT UP A RAMP HE HAD TO STOP & BACK UP IN ORDER TO ENTER THE RAMP STRAIGHT WHEN HE BACKED UP EMPLOYE E CLAIMS BRAKES DID NOT HOLD CAUSING THE TRUCK TO BACK ONTO A PILE & ROLL OVER ONTO LEFT SIDE FORCE OF ROLL OVER CAUSED 2 BATTERIES TO JAR LOOSE FROM BOX & ENTER THRU RT WINDOW SPLATTERING SO
EE WAS PULLING A HOSE DOWN A HILLSIDE WHEN A ROCK BROKE. LOOSE AND HIT HIM ON LEFT LEG. DID NOT BOTHER HIMUNTIL 4-25-94 HIS FIRST DAY OFF WORK.
DRILL OPERATOR NEEDED TO TIGHTEN A PIPE ON THE DRILL COMPRESSOR ON DECK OF DRILL RIG.OPERATOR CLIMBED OFF TO GET CORRECT SIZE WRENCH RETURNED TO DRILL DECK.STEPPED FROM COMPRESSOR TO TOOL BOX AND LEFT LEG SLIPPED.RIGHT LEG CAUGHT ON METAL OF CONTROL PANEL OF COMPRESSOR.INJURY CONSISTED OF AN EIGTH INCH V SHAPED CUT 1 ABOVE RIGHT KNEE IN FATTY TISSUE. HE RECEIVED 25 STITCHES AND WAS
EMPLOYEE WAS DRAGGING A HOSE & TWISTED HIS BACK.
EMPLOYEE WAS WASHING A ROCK TRUCK WITH A HIGH PRESSURE STEAM WASHER. HE PASSED THE WAND OVER HIS RIGHT SHOE INJECTING HOT WATER INTO HIS SHOE.
EMPLOYEE WAS GRINDING ON A D9 FINAL DRIVE. A PIECE OF STEEL FLEW UNDER HIS WELDING SHIELD AND BECAME EMBEDDED IN HIS LEFT EYE.
EMPLOYEES WERE REMOVING A BLADE PUSH ARM FROM A D11 DOZER.EMPLOYEE WAS PREPARING TO BLOCK THE PUSH ARM WHEN A CHAIN SLIPPED OFF THE HOOK OF A BOOM TRUCK,THE PUSH ARM SWUNG BACK AGAINST THE TRA CK FRAME PINNING EMPLOYEE BETWEEN THE ARM AND TRACK FRAME.
PULLING TH FILTER OUT OF THE CAN HANDLE BROKE OFF CUTTING FINGERS
MOVING A PUMP,SLIPPED ON ROCK CUT LEFT LEG ON ROCK.
EMPLOYEE STATES HE BUMPED HIS SHIN ON A BRACE ON THE PAN 4/27/90 HE THOUGHT NOTHING OF THIS AS IT DID NOT HURT SKIN WAS SLIGHTLY BROKEN HE DID NOT REPORT IT UNTIL 5/02 WHEN HE NOTICED AREA WAS SWELLING & HE HAD A FEVER
EMPLOYEE WAS WALKING GROUND WAS A LITTLE FROSTY EMPLOYEE FELL AND BROKE ANKLE.NCFC JOB #189.
EMPLOYEE WAS HELPING TO REMOVE A BEARING FROM A WHEEL IN THE EQUIPMENT PARKING AREA HE ATTEMPTED TO CATCH THE BEARING AS IT WAS RELEASED THE WEIGHT OF THE BEARING FORCED HIS HAND DOWN AGAINST THE H OUSING SMASHING HIS FINGERS
EMP WAS TIGHTEN3NG BOLTS ON R 75 TRUCK AT END OF THE SHIFT DOING NORMAL MAINTENANCE WHEN HE NOTICED A PAIN IN LOWER BACK. SUPERVISOR DID NOT BELIEVE THIS TO BE AN MSHA REPORTABLE ACCIDENT D DUE TO LACK OF 4EDICAL TREATMENT. EMP WAS GIVEN PAIN RELIEVERS SO INSPECTOR TOLD HIM IT MUST BE REPORTED
EMPLOYEE WAS AS8ISTING A FOREMAN SET UP A DRILL, HIS GLOVE GOT CAUGHT, PULLING HAND INTO DRILL
TRYING TO GET U1 ON LUB TYRUCK HIS LEGS FLEW OUT AT 90 DEGREE ANGLE AND EMPL FELL.HE FELT SHARP PAINS IN GROIN AREA.