Wild Horse Plant: 126 citaciones de la MSHA Metal/Non-Metal

Climbing ladder was 2 steps up and started back down and missed last steps

Accident reported 4/22/2008; after employee had been off for illness. Employee reported he had lifted 20 pallets weighing approximately 45 lbs each over a shift. Employee reported this caused internal injuries.

EMPLOYEE PUT UP A LADDER TO CLIMB ONTO A HOPPER BIN. LADDER SLIPPED OUT FROM UNDER HIM CAUSING HIM TO FALL AND HIT HIS SIDE ON HOPPER BIN.

WHILE PUSHING A HOPPER CAR TO BE LOADED, LOADINGCHUTE HIT TOP OF HOPPER; LOST BALANCE AND FELL BACK; CHUTE FELL ON TOP OF RIGHT LEG SCRAPING LEGBETWEEN ANKLE AND KNEE; 5 STITCHES REQUIRED.

LIFTED WRONG WHILE LIFTING ROCK

WORKING ON JOURNAL FOR A MILL; AN EXTRA JOURNAL STANDING BESIDE HIM TIPPED OVER STRIKING HIM ON RIGHT CALF BUSTING VESSEL INSIDE LEG.

WAS ON TOP OF HOPPER CAR CHANGING HOSE FROM ONE COMPARTMENT TO ANOTHER AT THAT TIME THE HOSE GOT STUCK ON WALKWAY AS HE JERKED THE HOSE THERE WAS A PIECE OF #16 WIRE STICKING UT POKING HIM ON HIS RT KNEE

LIFTING A GUARD OFF THE WHIZZER ON MILL #1. HE FELT THE GUARD WASN'T AS HEAVY AS HE THOUGHT SO HE TRIED LIFTING IT WITH ONE HAND CAUSING HIS BACK TO STRAIN.

HE WAS CLIMBING DOWN A STEP LADDER WHEN HIS ANKLE GAVE ON HIM CAUSING HIS KNEE TO TWIST

TAKING BOTTLES DOWN FROM PICKUP TRUCK AS BRINGING THEM DOWN ONE IT SLIPPED SMASHED BETWEEN THE TWO BOTTLES

CLIMBING IN CRUSHER, PULLING ON TALC SHARP PAIN IN R SIDE OF STOMACH

CLIMBED UP HOPPER CAR TO GET IT READY TO CLEAN IT UP FOR LOADING MATERIAL TO BE PUT IN. IT HAD BEEN RAINING AND LIGHTENING FOR SEVERAL HRS. THAT THE SLIPPERY TALC FROM ON TOP OF THE CAR CAUSED HIM TO SLIP AND FALL IN.

EE WAS CUTTING END OF DRILL STEEL TO MAKE A PRY BAR FOR CERTAIN TYPES OF WORK WHEN SPARKS FROM THE OBJECT BEING CUT WITH TORCH FLEW TO HIS SHIRT CATCHING IT ON FIRE AND DID NOT NOTICE TIL HIS STOMACH WAS BURNING.

EE WAS WALKING ON THE NORTH SIDE OF NEW MILL TO GO AND TAKE A SAMPLE OF THE MATERIAL WE WERE GRINDING THE GROUND WAS MUDDY AND HAD SNOW CAUSING HIM TO FALL ON HIS BACK.

EMPL WAS IN ILL AREA BRINING IN SAMPLE WHEN HE SLIPPED IN MUDDY AREA & FELL ON BACK. IT HAD BEEN RAINING.

WHILE PRYING OUT ROCK IN RED CRUSHER FOR BIG ELEVATOR BAR SLIPPED & HIT ELBOW ON TOP OF CRUSHER

PATIENT WAS CUTTING PIECE OF METAL WHEN FRAGMENT WENT INTO EYE WITH CUTTING TORCH.

EMPLOYEE WAS FIXING TO LOAD A BOXCAR FIRST SWEEPING THE CAR AS HE FINISHED HE LEAPED FROM INSIDE THE BOX CAR TO THE LOADING DOCK. ONE LEG SLIPPED AND THE OTHER WAS HANGING FROM LOADING DOCK. FALLING APPROX 4' HITTING HIS ARM AND BACK.

HAD BACK OPERATED ON LAST OCT,1989.IN JAN CAME BACK TO WORK WITH FULL RELEASE FROM DR.HAD NO TROUBLE UNTIL LAST 2 WEEKS.THE LAST MONTH HAVE HAD LOTS OF BREAKDOWNS DUE TO LONG HOURS AND PUSHING AND PULLING AND LIFTING TRYING TO GET EVERYTHING RUNNING.HAS BEEN HAVING SMALL PAIN IN BACK AND STINGING IN LEGS AND FEET.

EMPLOYEE WAS WALKING TO PLANT AREA TO GET CALL WHEN ALL OF A SUDDEN STEPPED ON A NAIL PUNTURING RIGHT FOOT AND NEEDED A TETNUS SHOT.

HE WAS TRYING TO PUT THE BAGGING CHAIR IN PLACE WHEN ANOTHER PIECE OFF THAT PARTICULAR PART CAME OFF STRICKING HIS FINGER ON HIS LEFT HAND AND BUSTING IT OPEN. FRACTURING THE TIP OF IT.

MA( WA> FILING UP OUR MIL FEED TANKS WHEN ALL OF A SUDDEN HE RAN OUT OF FEED AND AS HE WENT TO GO AND START UP OPERATION TO KEEP GOING HE SAW SOMETHILNG WRONG W/BATCH PLANT AND STA\TED TO W ALK BACK SO FAST HE BANGED HIS HEAS CAUSING A JAM TO NECK AND BACK HE WA> WEARING A HARD HAT.

THE MAN WAS TRYING TO TAKE A BEARING OFF WHICH WAS BROKE. HE WAS BANGING A METAL OBJECT WITH A HAMMER. HE WAS THEN STRUCK WITH A PIECE OF METAL ON HIS THUMB.