← Volver a la búsqueda

HOME PIT AND MILL Metal/Non-Metal

HINESBURG SAND & GRAVEL COMPANY INC · Surface

Controlada por Timothy Casey

Hinesburg, Chittenden Condado, VT · Activa

ID de mina MSHA: 4300110

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en HOME PIT AND MILL.

Muertes: 1
Incidentes totales: 7
Años en registro: 2005–2022
Último incidente: Aug 2022

Muertes en esta mina

1 registradas

30 de julio de 2019 VT · Metal/No metálico Cargador frontal, Operador de pala-traílla, Operador de traílla, Cargador (payloader), Operador de equipo de traílla Muerte · TRANSPORTE MOTORIZADO

Hinesburg Sand & Gravel Company Inc · Golpeado contra un objeto fijo

EE was traveling up the meadow road to load a truck. While driving up the road, EE shook the bucket to make sure it was clean. The bucket contacted the ground and made the loader suddenly stop and propel EE into the windshield.

Incidentes reportables

6 en archivo (excluyendo las muertes anteriores)

2022 · 1 incidente

8 de agosto de 2022 VT · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo TRANSPORTE MOTORIZADO

Hinesburg Sand & Gravel Company Inc · Golpeado por... no clasificado en otra parte

Employee was checking for an air leak. They had the operator hold down the brake pedal and proceeded to feel around the brake canister shaft. The operators foot slipped off the pedal and when the shaft retracted it lacerated employee's thumb and finger.

2011 · 1 incidente

4 de agosto de 2011 VT · Metal/No metálico Capataz de exterior, Cabo RESBALÓN O CAÍDA DE PERSONA

Hinesburg Sand & Gravel Company Inc · Caída desde escaleras de mano

Employee was standing on the third step of a 5 step ladder. He was cutting a piece of metal off a truck dump body. He used a bar to finish taking off the metal strip. When the metal came loose employee lost his balance and fell to the floor.

2009 · 1 incidente

30 de noviembre de 2009 VT · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador MAQUINARIA

Hinesburg Sand & Gravel Company Inc · Golpeado por objeto proyectado

EE was working on a tail pulley in the shop. He was using a carbide cut off saw and the blade broke and a piece flew up and hit him in the forehead.

2006 · 2 incidentes

30 de noviembre de 2006 VT · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador HERRAMIENTAS MANUALES (SIN MOTOR)

Hinesburg Sand & Gravel Company Inc · Golpeado por objeto proyectado

A pin was being removed from a crane's drive chain. The pin would not come out so heat was applied to the pin from both sides of the pin. The injured employee was told to put the torch away, while 2 other employees hammered on the pin. The injured employee returned and bent down on the other side of the track to look at the pin. The pin let go and struck the employee in the chin.

10 de abril de 2006 VT · Metal/No metálico Capataz de planta de preparación, Supervisor, Supervisor de planta de molienda, Supervisor de horno RESBALÓN O CAÍDA DE PERSONA

Hinesburg Sand & Gravel Company Inc · Caída a la pasarela o superficie de trabajo

Employee was working in the shop and stepped back and tripped over a wooden block. He stopped his fall with his left wrist. He stress-fractured one of the bones.

2005 · 1 incidente

25 de abril de 2005 VT · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador MAQUINARIA

Hinesburg Sand & Gravel Company Inc · Atrapado en, bajo o entre, no clasificado en otra parte

EE was polishing a shaft for a conveyor on a lathe. He was wearing bulky welding gloves at the time of the accident. He put a strip of sand paper completely around the shaft. The paper and his glove cought on the shaft pulling and bending his wrist. Nearby employees shut down the lathe.