Mine No 1 Coal

ROOF FALL OCCUR9ED IN #5 AND #6 INTERSECTION AND CONNECTING X-CUT IS ADJACENT TO SPAD #1704 IN #4 ENTRY.FALL WAS 80'LONG X 20-30'WIDE X 4-8'HGIH.

ROCK FALL OCCUR9ED 1 X-CUT INBY SPAD #1700.ENTIRE INTERSECTION 5-6'HIGH.

A ROCK FALL HAD3BEEN DISCOVERED ON AN EARLIER DATE.MSHA WAS NOTIFIED BY PHONE AND EXAMINED THE FALL.A 7000-1 FORM WAS NOT FILLED OUT BECAUSE I DID NOT KNOW TO DO SO AT THAT TIME.

EMPLOYEE WAS TA5ING SLAKE OUT OF #1 BELT WITH A WINCH TYPE TAKE UP HE DIDNT RESET HIS SAFETY CATGCH ON TAKE UP WHEN HE STARTED CRFANKING THEBELT UP THE LOAD GOT TO BIG FOR HIM TO HOLD APPAREN TLY JERKING HAN8LE OUT OF HIS HANDS HITTING HIM ACROSS THE NOSE STRIKING HIM ON HIS ARM & LEG

EMPLOYEE WAS MO5ING A TOOL BOX WHEN HE PICKED IT UP, HE SAID HE FELT PAIN IN HIS LOWER BACK.

EE WAS HELPING 1UT CONVEYOR CHAIN BACK IN MINER PULLING MUSCLE IN HIS BACK.

ROOF BOLTER OPE9ATOR WAS INSTALLING A FLY BOARD WITH A CHECK CURTAIN NAILED TO IT THE PIECE OF CURTAIN GOT CAUGHT IN THE STEEL & HEAD WRAPPING AROUND THE STEEL CATCHING OPERATORS LEFT HAND WH ICH RESULTED IN3OPERATOR LOSING TWO OF HIS FINGERS & BREAKING HIS WRIST

EE WAS LOADING 8AFETY JACKS ON ROOF BOLTER & THREW JACK ON HIS OWN HAND & COMPLAINED THAT AFTERNOON AT T HE END OF T HE SHIFT WITH HIS LITTLE FINGER ON THE RIGHT HAND.

EMPLOYEE WAS TA5ING DOWN A PIECE OF ROCK WITH SLATE BAR, ROCK STRUCK SAFETY JACK ON ITS WAY DOWN, CAUSING JACK TO KICK OUT, STRIKING EMPLOYEE ON THE LEFT LEG (THIGH AREA) WITH THE HEAD OF THE JACK, THUS BRUS3NG THE MUSCLE IN HIS LEFT LEG.

EE WAS HELPING 1ULL A BROKEN BELT BACK TOGETHER WITH A GRIP HOIST WHEN THE GRIP HOIST FOT PRESSURE ON IT SLIPPED LETTING THE HANDLE FLY BACK HITTING EE ON THE BICEP MUSCLE ON THE ELFT ARM BRUISING MUSCL9 & NERVE IN ARM.

I,NAME THE MINE9 OPERATOR WAS TRAMMING MINER FROM ONE HEADING TO ANOTHER AND HIS FOOT GOT CAUGHT ON A ROCK AND TWISTED HIS KNEE.

EMPL PRYING A TIRE OFF WHEEL WHILE ANOTHER WAS BEATING THE OTHER SIDE OF TIRE WITH HAMMER AND SLATE BAR FLEW UP AND HIT MAN IN THE NOSE.

EMPLOYEE WAS LOADING COAL NTO RAMCAR, STRIKING FINGER BETWEEN LUMP OF COAL & RAMCAR.

ROOF BOLTER OPERATOR WAS DRILLING HOLE IN TOP TO INSTALL PERMANENT ROOF BUPPORT WHEN A PIECE OF SLATE DROPPED LOOSE FROM MAIN TOP, STRIKING OPERATOR ON LEFT SHOULDER AND RIGHT KNEE.

EMPLOYEE WAS SCOTCHING ROOF BOLTING MACHINE TO KEEP IT FROM MOVING ON A STEEP GRADE WHEN REMOVING SCOTCH HE GOT HIS HAND CAUGHT BETWEEN SCOTCHING MATERIAL & BOTTOM, THUS MASHING HIS THUMB & LA CERATIONS OF THE SKIN.

EMPLOYEE WAS OPERATING ROOF BOLTING WHILE DRILLING THE TOP HE HAD HIS HAND LAYING ON HEAD OF MACHINE AND A PIECE OF DRAW ROCK BROKE LOOSE AND CUT HIS RIGHT INDEX FINGER.

EMPLOYEE WAS UNLOADING A RIPPER HEAD JACK OFF OF THE DELIVERY TRUCK, THUS PULLING MUSCLE IN HIS LEFT CHEST CAVITY.

EE WAS GETTING SOME ROOF BOLTS OFF MACHINE & TWISTED HIS LEFT KNEE.

ROOF BOLT OPERATOR WAS INSTALLING A ROOF BOLT IN AHOLE WHEN A PIECE OF DRAW ROCK FELL, HITTING HIM ON HIS LEFT KNEE, THUS BRUISING HIS KNEE.

ELECTRICIAN WAS CHANGING OUT RIPPER MOTOR ON 15 CM JOY, WHERE HE WAS USING A BAR TO OBTAIN LEVERAGE TO REMOVE MOTOR, THUS STRAINING A MUSCLE IN HIS LEFT ELBOW.

SCOOP OPERATOR WAS HELPING MOVE CONTINUOUS MINER TO NEXT WORKING PLACE. WHILE MOVING CABLE HE TWISTED HIS KNEE THUS RESULTING IN AN TORN CARTILAGE

EMPLOYEE WAS UNHOOKING RAM CAR AND CAUGHT FINGER ON COUPLING PIN.

EMPLOYEE DISCONNECTED SCOOP BATTERIE FROM CHARGER AND WAS CONNECTING SCOOP TO BATGTERIES AND GAS UNDER BARTTERY LID IGNIGHTED AND BLEW UP IN THE AIR AND CAMD DOWN ON HIS HEAD AND CUT A INCISIO N ABOUT 1/2 INCH LONG

HEAROLD WHITED, THE ROOF BOLT OPERATOR WAS BOLTING #1 ENTRY AND WAS UP ON HIS KNEES IN THE DECK AND HAD HIS FEET HANGING OVER THE FRONT OF THE DECK WHILE TRAMMING TOWARD THE FACE. HE GOT HIS FOOT CAUGHT BETWEEN DECK AND FACE. (IT ONLY APPEARED TO BE BRUISED AT THAT TIME)