Miner was hammering on a small piece of metal when a shard from that piece of metal splintered off and became embedded in the back of EE's hand.
Manitowoc County Quarries Metal/Non-Metal
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Manitowoc County Quarries.
- Muertes
- 0
- Incidentes totales
- 26
- Años en registro
- 2000–2023
- Último incidente
- Mar 2023
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 8,295 | 1 | 0 | 120.6 |
| 2025 Q3 | 8,967 | 1 | 0 | 111.5 |
| 2025 Q2 | 9,655 | 0 | 0 | 0.0 |
| 2025 Q1 | 7,298 | 3 | 1 | 411.1 |
| 2024 Q4 | 7,978 | 0 | 0 | 0.0 |
| 2024 Q3 | 7,543 | 0 | 0 | 0.0 |
| 2024 Q2 | 5,927 | 1 | 0 | 168.7 |
| 2024 Q1 | 5,947 | 2 | 0 | 336.3 |
Incidentes reportables
26 en archivo2023 · 1 incidente
2022 · 1 incidente
Miner was climbing up a rock pile when a rock shifted and caused EE to fall. When EE fell, the ice auger that EE was carrying struck EE's left wrist and cut it open. Four stitches were required to close the wound.
2021 · 1 incidente
Miner was blocking a conveyor. The conveyor shifted and pinched a wrist between the conveyor and a screen plant.
2020 · 3 incidentes
Miner was washing the upper deck of the crusher plant screen and slipped. Miner strained right quadriceps.
Miner was pounding on a pin from the track of a backhoe with a hammer when a steel shard from the pin broke off and embedded itself in right shin.
Miner was working to repair a crusher using parts cleaner. Parts cleaner and oil from the crusher got onto EE's pants. When EE used a grinder to cut steel sleeve, sparks ignited EE's pants and EE's knees and calves were burned.
2017 · 1 incidente
Miner was using a Tamrock drill rig and was attempting to remove the drill bit by hitting it with a hammer. Another hammer was propped against the drill bit to secure the bit. When EE struck the bit with one hammer, the other hammer slid down pushing EE's finger across the broken drill bit which lacerated the finger.
2016 · 1 incidente
Miner was operating a backhoe equipped with a rock hammer. After several hours of operation, ee began to feel numbness in right arm and right hand.
2015 · 1 incidente
Employee has been operating heavy equipment for many years for this company. He has developed pain in his right elbow working the equipment controls.
2013 · 1 incidente
Driller was changing the steel when he smashed the #2 finger of his right hand between the steel and a piece of stone causing a laceration needing 7 stitches to close. Worker returned to work with restrictions.
2009 · 1 incidente
Worker was removing nuts using and air impact wrench and his right wrist became sore. He did not report the injury to management until 05/26/2009. Went to a clinic and was placed on restricted duty. No lost time.
2007 · 1 incidente
Worker was repairing a air-powerd greaser; the piston became stuck. When he tried to free the piston the fingers of his left hand became trapped by the piston causing a laceration to the middle finger of his left hand requiring stitches to close the wound.
2006 · 5 incidentes
EE was painting screen.
Employee was getting out of loader and was stung by a bee under left arm.
Employee was removing a trailer hitch from a company truck when foreign matter got in his right eye. Employee did have his safety glasses on.
was putting a rear pin in the pup trailer and block of wood hit him in the head.
Employee was greasing loader and bumped his left knee on the bucket, bruising left knee.
2005 · 1 incidente
Employee was backing with quarry truck to unload, backed through berm & suddenly noticed & stepped on the gas to go forward & ground gave way and the truck began to roll downhill.
2002 · 1 incidente
EE STARTED THE AIR COMPRESSOR AND A PARTICLE CAME OFF THE EXHAUST AND FLEW IN HIS RIGHT EYE. THE CENTER OF HIS RIGHT EYE WAS SCRATCHED BY THIS MATTER.
2001 · 3 incidentes
EMPLOYEE WAS PICKING UP SIDE BOARDS FOR THE TRAILER AND PUTTING THEM IN THE TRAILER BED WHEN HIS LOWER BACK SNAPPED.
EE WAS GRINDING IN A REAL TIGHT SPOT AND THE GRINDER (9" HAND HELD GRINDER) KICKED BACK AND HIT MY LEFT KNEE. SOME SWELLING AND HURTS WHEN HE BENDS THE KNEE BUT IF HE STANDS UP STRAIGHT DOES N OT HURT.
EE WAS BENDING OVER TO PICK UP SOME STEEL. (ONE END OF A 20' BY 3" CHANNEL) WHEN STANDING BACK UP, I FELT PAIN IN MY LEFT HIP.
2000 · 4 incidentes
EE WAS CLIMBING DOWN THE LADDER ON A LOADER WHENHE STEPPED ON THE LAST BAR OF THE LADDER & IT GAVE WAY CAUSING HIM TO FALL & HIT THE SIDE OF THEMETAL LADDER CRACKING 2 RIBS ON THE RIGHT SIDE
EMPLOYEE WAS INSTALLING A WINDOW IN SHOP BUILD- ING WHEN A PIECE OF WOOD HIT HIM IN THE LEFT EYEWHILE PUTTING THE WINDOW IN.
EE WAS WALKING FROM FILTER ROOM PAST BATH ROOM TOWARD FRONT SERVICE DOOR BY PRESSURE WASHER, NEAR BATHROOM AND TRIPPED OVER PORTABLE STAIRS NEAR HOSE PRESS MACHINE. NOW IS EXPERIENCING SORE LO WER BACK AND RIGHT SIDE, MAY HAVE CRACKED A RIB. 2/14/00 UPDATE - SAW DR AND ALL IS O'KAY PER EE AND DR. NO CRACKED RIBS.
EE WAS RUNNING A LOADER WHILE LOOSENING DIRT IN QUARRY. WHILE DOING SO, LOADER HOOKED STONE JERKING LOADER AND EE WITH SAFETY SEAT BELT ON SIDE WAYS CAUSING EE TO HIT THE ARM REST OF HIS SEAT LEFT SIDE.