Operator set down a grinder while cutting disk was still spinning, disk contacted the conveyor belt and jumped to the side. The spinning disk contacted the back of the operators hand and caused a laceration to the hand. Laceration required stiches to close.
Plant #26 Metal/Non-Metal
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Plant #26.
- Muertes
- 0
- Incidentes totales
- 33
- Años en registro
- 2000–2025
- Último incidente
- Jun 2025
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 6,309 | 0 | 0 | 0.0 |
| 2025 Q3 | 12,102 | 0 | 0 | 0.0 |
| 2025 Q1 | 2,937 | 0 | 0 | 0.0 |
| 2024 Q2 | 12,333 | 1 | 0 | 81.1 |
| 2024 Q1 | 2,265 | 0 | 0 | 0.0 |
| 2023 Q4 | 0 | 0 | 0 | |
| 2023 Q3 | 9,688 | 0 | 0 | 0.0 |
| 2023 Q2 | 10,920 | 0 | 0 | 0.0 |
Incidentes reportables
33 en archivo2025 · 1 incidente
2024 · 2 incidentes
Operating haul truck and felt back go out.
Lower back pain from operation haul truck on rough road.
2023 · 2 incidentes
Operator was stepping down from catwalk to another, stepped wrong and twisted knee and fell onto catwalk.
Employee was loosening a bolt with impact wrench. Employee tried to hold bolt in place with hand, when bolt head spun and cut hand.
2022 · 1 incidente
Stood up while working under wash plant and suffered a neck contusion when head struck wash plant.
2019 · 1 incidente
Operator slipped and fell to the ground, breaking a wrist.
2018 · 1 incidente
Slipped while carrying tools and supplies, causing small laceration to right knee. Wound became infected a week later. Employee was treated for the infection at that time.
2017 · 2 incidentes
Operator cut their finger when they lost grip while placing a large bolt in the jaw crusher. Bolt landed on the right index finger causing a small laceration to finger tip requiring 3 stiches to close.
While removing railing section and tossing to ground, railing caught operator clothing and pulled over the side. Operator fell to ground injuring back.
2015 · 1 incidente
Operator cut his hand while tightening screen bolts. Needed 4 stiches to close the wound.
2013 · 1 incidente
Ee was helping to lift a wire screen cloth over a railing when he pinched his right ring finger between the screen and railing.
2009 · 2 incidentes
While performing work activity on top of a loader bucket, EE twisted his right ankle.
Climbing down steps of Volvo haul truck, EE felt pain in his lower back. Possibly pre-existing condition.
2006 · 1 incidente
While replacing bracket using the air gun to spin off the bolts on top. Right was on the bottom holding the bolt up when the air gun jammed on, causing the bolt to spin resulting in a laceration on his finger.
2005 · 3 incidentes
While climbing from the loader he felt a pop in his shoulder.
Employee was directing other employee who was operating hammer to break rock in the jaw when the hammer slipped off the rock and lunged over crushing EE's hand.
While adjusting a conveyor belt the wrench got caught in the tailroller and wedge employees hand between the wrench and the tailroller adjusting bracket.
2004 · 1 incidente
EMPLOYEE WAS SHOVELING DIRT FROM UNDER CONVEYOR IN DOGHOUSE. WHILE DOING SO, DIRT GOT UNDER SAFETY GLASSES AND IN HIS EYE. EMPLOYEE SOUGHT MEDICAL TREATMENT AND RECEIVED A PRESCRIPTION.
2003 · 2 incidentes
WHILE CHANGING SCREENS EE FOUND HIMSELF POUNDING, PRYING AND PULLING THE SCREENS TO GET THEM SWITCHED OUT. AS A RESULT HE EXPERIENCED SHOULDER DISCOMFORT.
EE WAS MOVING FROM LOADER CATWALK TO FENDER WHEN HE SLIPPED AND FELL.
2002 · 1 incidente
EMPLOYEE WAS ON HIS STOMACH/ SIDE SWITCHING OUT A CONVEYER ROLLER. THE ROLLER GOT CAUGHT ON THE CONVEYER BELT AND HE GAVE IT A TUG RESULTING IN PAIN IN HIS LOWER BACK.
2001 · 7 incidentes
EE WENT TO STEP ONTO RAILCAR AND MISSED T6HE STEP AND FELL STRIKING HIS ELBOW.
WHILE LIFTING A CUTTING EDGE WITH ANOTHER PERSON, THEY ATTEMPTED TO DROP IT IN THE LOADER BUCKET, HOWEVER, IT LANDED ON EE'S FOOT.
WHILE CHANGING THE JAW ON THE PRIMARY, EE CRAWLED INSIDE TO TIGHTEN SOME BOLTS. HE WAS PUSHING WITH HIS LEGS WHEN HE FELT SOMETHING POP. HE IS TREATING CURRENTLY.
EE WAS TRYING TO SEPARATE A PIECE OF STEEL FROM THE DRILL STEEL WITH A PIPE WRENCH. IT SLIPPED OFF AND CAUGHT HIS LT RING FINGER BETWEEN THE WRENCH AND FRAME. THE LACERATION REQUIRED STITCHES.
WHILE MOVING A PARTIAL FULL BARREL OF FREEZTROL THE BARREL STRUCK THE GROUND AND PRODUCT SPLASHED OUT. EE WAS SPLASHED ON HIS UPPER BODY AS WELLAS ON HIS FACE AND UNDER HIS GLASSES.
WHEN TAKING MACHINE APART, PULLING ON A WRENCH EE FELT SOMETHING SNAP IN HIS RT WRIST. SOUGHT MEDICAL ATTENTION.
EE GOT DUST IN HIS EYES WHILE AIR ARCING.
2000 · 4 incidentes
EE WAS PUTTING THE CAP ON THE CONE OF THE CRUSHER-AFTERWARDS HE HAD A STOMACH ACHE. ONCE HE GOT HOME. HIS STOMACH STARTED TO SWELL. HE WENT TO THE HOSPITAL AND WAS DIAGNOSED WITH A HERNIA.
WHILE CUTTING A PIECE OF CONVEYOR BELT WITH A UTILITY KNIFE EE STABBED HIMSELF ABOVE THE KNEE
AFTER LOADING A BOBCAT ON A SEMI TRAILER, EE UNHOOKED A CHAIN FROM THE BUCKET AND STEPPED BACK-HIS FOOT WENT THROUGH A HOLE IN THE DECK OF TRAILER CAUSING HIS INJURY.
WHILE INSTALLING SIDE LINERS IN THE JAW OF THE CRUSHER USING HOOK ON A SPLITTER CABLE. WHEN THERE WAS PRESSURE APPLIED TO LIFT THE LINER, THE FREE HOOK SPUN AROUND SMASHING HIS LEFT HAND.