Employee was the loader operator on shift. As he was getting down from the loader he stepped on a rock or uneven ground, therefore spraining his ankle.
BRC Wellington LLC Coal
BRC Wellington LLC tiene $5K en multas propuestas de MSHA y $944 pendientes en 1 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en BRC Wellington LLC.
- Muertes
- 0
- Incidentes totales
- 6
- Años en registro
- 2010–2015
- Último incidente
- Jan 2015
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.BRC Wellington LLC tiene $5K en multas propuestas de MSHA y $944 pendientes en 1 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.El muestreo de MSHA en BRC Wellington LLC muestra un polvo respirable de carbon promedio de 0.29 mg/m3 (100% en cumplimiento) en 75 muestras.
ⓘ
Una muestra es una medicion de cumplimiento en un momento dado, no un historial de exposicion individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbon y silice corresponden a instalaciones de carbon. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2018 Q1 | 2,174 | 2 | 0 | 920.0 |
| 2017 Q4 | 2,950 | 0 | 0 | 0.0 |
| 2017 Q3 | 4,632 | 1 | 0 | 215.9 |
| 2017 Q2 | 4,380 | 0 | 0 | 0.0 |
| 2017 Q1 | 5,316 | 0 | 0 | 0.0 |
| 2016 Q4 | 2,813 | 5 | 1 | 1777.5 |
| 2016 Q3 | 3,164 | 3 | 0 | 948.2 |
| 2016 Q2 | 1,494 | 0 | 0 | 0.0 |
Mostrar 41 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2016 Q1 | 512 | 1 | 0 | 1953.1 |
| 2015 Q4 | 504 | 0 | 0 | 0.0 |
| 2015 Q3 | 520 | 0 | 0 | 0.0 |
| 2015 Q2 | 2,447 | 0 | 0 | 0.0 |
| 2015 Q1 | 3,847 | 0 | 0 | 0.0 |
| 2014 Q4 | 5,206 | 0 | 0 | 0.0 |
| 2014 Q3 | 5,926 | 0 | 0 | 0.0 |
| 2014 Q2 | 6,507 | 1 | 0 | 153.7 |
| 2014 Q1 | 8,012 | 0 | 0 | 0.0 |
| 2013 Q4 | 6,737 | 0 | 0 | 0.0 |
| 2013 Q3 | 7,362 | 2 | 0 | 271.7 |
| 2013 Q2 | 5,502 | 0 | 0 | 0.0 |
| 2013 Q1 | 2,404 | 0 | 0 | 0.0 |
| 2012 Q4 | 7,247 | 0 | 0 | 0.0 |
| 2012 Q3 | 8,148 | 1 | 0 | 122.7 |
| 2012 Q2 | 5,184 | 1 | 0 | 192.9 |
| 2012 Q1 | 3,381 | 0 | 0 | 0.0 |
| 2011 Q4 | 2,802 | 1 | 0 | 356.9 |
| 2011 Q3 | 3,820 | 0 | 0 | 0.0 |
| 2011 Q2 | 5,913 | 3 | 2 | 507.4 |
| 2011 Q1 | 9,507 | 1 | 0 | 105.2 |
| 2010 Q4 | 8,898 | 1 | 0 | 112.4 |
| 2010 Q3 | 8,316 | 2 | 0 | 240.5 |
| 2010 Q2 | 6,008 | 0 | 0 | 0.0 |
| 2010 Q1 | 7,704 | 3 | 3 | 389.4 |
| 2009 Q4 | 5,297 | 0 | 0 | 0.0 |
| 2009 Q3 | 6,482 | 3 | 0 | 462.8 |
| 2009 Q2 | 7,277 | 0 | 0 | 0.0 |
| 2009 Q1 | 5,996 | 0 | 0 | 0.0 |
| 2008 Q4 | 6,956 | 0 | 0 | 0.0 |
| 2008 Q3 | 5,893 | 3 | 1 | 509.1 |
| 2008 Q2 | 5,991 | 0 | 0 | 0.0 |
| 2008 Q1 | 6,202 | 0 | 0 | 0.0 |
| 2007 Q4 | 5,092 | 0 | 0 | 0.0 |
| 2007 Q3 | 2,882 | 0 | 0 | 0.0 |
| 2007 Q2 | 3,020 | 0 | 0 | 0.0 |
| 2007 Q1 | 3,071 | 0 | 0 | 0.0 |
| 2006 Q4 | 3,029 | 0 | 0 | 0.0 |
| 2006 Q3 | 3,336 | 0 | 0 | 0.0 |
| 2006 Q2 | 3,273 | 0 | 0 | 0.0 |
| 2006 Q1 | 3,839 | 2 | 0 | 521.0 |
Incidentes reportables
6 en archivo2015 · 1 incidente
2014 · 1 incidente
Employee was lifting a jig hood that was too heavy. He had lower back pain.
2011 · 2 incidentes
EE was replacing a wear liner in #1 jig feed bin. As he was welding it in, the polished steel was reflecting back into the hood from the sides and behind him causing the arc burn to his eyes.
EE was removing the hydraulic rams from an old crusher and was using a hammer to drive out the pins holding it in place. He missed the pin, hitting is left wrist with the hammer.
2010 · 2 incidentes
Bag house #1 tube had coal fines builing up and falling down chunks into the Jig, EE was reaching in and pulling out the chunks of coal fines and strained his neck.
EE had finshed lunch and went up in the plant to clean out the #1 baghouse hopper with an air lance which is a air hose with a 1/2 inch pipe hooked to it with a ball valve to turn air on and off with the valve. EE was removing the lance from the hopper it hit him in the mouth knocking out a lower front tooth. The ball valve is what struck him knocking the tooth out.
The full compliance file on BRC Wellington LLC
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.