The individual was removing drill steel from roof bolt hole and struck his right elbow on the canopy post.
Marker Portal Mine Coal
Marker Portal Mine tiene $30K en multas propuestas de MSHA y $0 pendientes en 16 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Marker Portal Mine.
- Muertes
- 0
- Incidentes totales
- 12
- Años en registro
- 2009
- Último incidente
- Aug 2009
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Marker Portal Mine tiene $30K en multas propuestas de MSHA y $0 pendientes en 16 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.El muestreo de MSHA en Marker Portal Mine muestra un polvo respirable de carbon promedio de 0.59 mg/m3 (92% en cumplimiento) en 91 muestras.
ⓘ
Una muestra es una medicion de cumplimiento en un momento dado, no un historial de exposicion individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbon y silice corresponden a instalaciones de carbon. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2010 Q1 | 2,485 | 0 | 0 | 0.0 |
| 2009 Q4 | 12,855 | 35 | 13 | 2722.7 |
| 2009 Q3 | 18,444 | 15 | 5 | 813.3 |
| 2009 Q2 | 27,089 | 62 | 18 | 2288.8 |
| 2009 Q1 | 29,275 | 19 | 4 | 649.0 |
| 2008 Q4 | 22,046 | 28 | 8 | 1270.1 |
Incidentes reportables
12 en archivo2009 · 12 incidentes
Individual was stretching out 2/0 cable when a loop of cable flipped over causing the cable to twist his wrist.
A fall was discovered in the worked out No. 1 Northeast macker panel. The fall was in the No.2 return entry at survey station No. 6507 and mneasured approx. 20' long x 20' wide x 6' thick. There were no injuries or equipment involved. The fall will not be cleaned.
A fall was discovered in the worked out No. 1 Northeast marker panel. The fall was in the No. 2 return entry at survey station No. 6527 and measured approximately 20' long x 20' wide x 6' high. There were no injuries or equipment involved. The fall will not be cleaned up.
The individual was installing a roof bolt when a piece of draw rock fell. The draw rock struck the edge of the tray of the roof bolting machine which caused the rock to break. A piece of the rock struck the individual's left wrist.
The employee was operating a continuous mining machine when a piece of draw rock fell out between roof bolts. The rock struck him on top of his head and bent his neck forward resulting in a strain to his neck.
The individual was installing a new cable (wire) on a conveyor belt take-up unit and strained his right shoulder.
The injured was operating a roof bolting machine and was raising the drill head up to the drill steel, when he caught his right hand btween the drill head chuch and the drill steel. This resulted in a laceration, which required sutures.
The injured was changing the drive chain on #5 drive and strained right shoulder when lifting a 60 drive chain to place on belt drive gears. The injured did not miss work but is scheduled for shoulder surgery on 7/31/09.
A fall was discovered in the No. 1 entry of the 1-left panel off 1 East marker at survey station No. 6600. The fall measured approximately 25' long by 7' thick by 17' wide. There were no injuries or equipment involved. The fall was approximately 650' outby the MMU 001-0 and will not be cleaned up.
The individual was helping slide a spool of shuttle car cable in to the scoop bucket and experienced pain in his right shoulder.
The individual was opening an air lock door, which is located on the mine travelway, and felt a pull in his lower back. He did not miss work or go to a physician until 5/19/09. The physician recently determined that the individual has a hernia. The operator was not aware that this was job related until 6/25/09.
The full compliance file on Marker Portal Mine
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.