SCRUBGRASS FUEL HANDLING FACILITY Coal

EE removed guard to clean the belt drum and realized the coal tripper needed move to the N end of the building. EE requested the CRO to start the unloading conveyor and traveling tripper. After the conveyor and tripper started EE laid the spud bar at EE's feet and proceeded to move phone from shirt pocket to pants pocket so it didn't fall out of shirt when EE was struck by bar

Employee (Mechanic) was pulling on the handle of a come-a-long when the equipment mechanism slipped, they lost grip and fell backwards. Their right elbow struck a large bolt on the crusher machine. Bruise to right arm.

Replacing screens and breaker plates on PA Crusher. The hoisted cradle assembly fell free from the swivel pin bolt Holding it in a raised position. The hex nut came off of the bolt threads. The assembly fell onto the arms of the employee.

Employee was using an air lance to clear the inside of a plugged hopper. Air from the lance end blew debris back into the face and a foreign object entered his left eye. He was wearing safety glasses with side-shields.

Initial injury occurred on 1/7/14. The employee was using a spud bar to clear a plugged chute when he felt a strain on his right arm. Initially, no first aid was sought. Later,(1/22/14), the employee went for follow-up tests to see why his arm continued to hurt. Prognosis- partial tear of the common extensor tendon.

THE EMPLOYEE WAS ATTEMPTING TO DISLODGE STICKY FUEL FROM A RETURN IDLER ON A CONVEYOR BY USING A SCRAPER. THE SCRAPER GOT CAUGHT BETWEEN THE IDLER & THE CONVEYOR. THE EE'S LT. THUMB WAS PINCHED BETWEEN THE SCRAPER & STRUCTURAL BEAM.

EE STRAINED RIGHT SHOULDER WHILE MOVING BREAKER PLATES FOR COAL CRUSHER EQUIPMENT. THESE PLATES WEIGHT APPROX. 200 LBS.

EE WAS RE-INSTALLING GUARDRAIL AFTER MAJOR EQUIPMENT MAINTENANCE WHEN HE SLIPPED FROM SAME LEVEL & FELL ONTO HIS LEFT WRIST. DUE TO HEAVY RAINS,HIGH WATER MADE CONTACT WITH FUEL MATERIAL NEAR EQUIPMENT CAUSING MUDDY CONDITIONS.

AN EMPLOYEE WAS STEPPING DOWN TO A FLOOR FROM AN ELEVATED AREA WHEN HE STEPPED ONTO THE HEAD OF A SLEDGE HAMMER & TWISTED HIS RIGHT ANKLE. (SPRAIN) NO LOST TIME BUT SOME RESTRICTED DUTY.

EE WAS MOVING A CART LOAD OF CRUSHER HAMMERS ACROSS THE FLOOR WHEN CART HANDLE CONTACTED STRUCTURE I BEAM. INJURY TO LEFT HAND WHEN EES HAND WAS ON CART HANDLE AT TIME OF CONTACT. CUT TO LITTL E FINGER ON LEFT HAND.

WHILE TRYING TO MOVE A NEW ROLL OF CONVEYOR BELTING INTO PLACE, AN EMPLOYEE FELT PAIN IN HIS GROIN WHEN HE AND (3) OTHER EMPLOYEES WERE PULLING AND SLIDING THE BELT ACROSS A GRATED FLOOR AREA.

EE WAS REMOVING THE SCALPING SCREEN DRIVE SIDE SUPPORT AND BEARING. THE SUPPORT HOUSING DISLODGED AND HIT EE ON THE RIGHT ARM AND LARGE TOE ON LEFT FOOT. EE MOVED QUICKLY TO GET OUT OF THE WAY AND STRAINED MUSCLES IN LOWER BACK AREA.

REMOVING OLD ABANDONED DUCTWORK, EE FELL FROM 2ND RUNG OF 6' STEPLADDER WHEN A 5' SECTION OF DUCTWORK FELL FROM TAGLINE AND STRUCK LADDER CAUSING EE TO FALL TO FLOOR. EE RECEIVED NO MEDICAL TR EATMENT BUT WAS XRAYED AND FRACTURED TAILBONE WAS DIAGNOSED.

EMPLOYEE WAS TIGHTENING A NUT ON A HOIST TROLLEYAND THE WRENCH SLIPPED OFF THE NUT AND STRUCK HIM ON THE BRIDGE OF HIS NOSE CAUSING A LACERATIONOF NOSE.

EE WAS USING AN AIR LANCE (1/2" CONDUIT WITH AIR LANCE ATTACHED) TO UNPLUG CRUSHER CHUTE. STRAINED SHOUDER.

EE CLIMBED ONTO RECLAIMER BELT TO CLOSE COVER. HE SADI HE WAS NOT PAYING ATTENTION TO THE COVER SUPPORT AND HIT HIS LEFT KNEEL. HE INFORMED HIS SUPERVISOR AND CONTINUED TO WORK THE REST OF HIS SHIFT AND THE NEXT DOOR AS WELL. AFTER TWO DAYSHIS KNEE STILL HURT SO HE SAW A DR WHO ADVISER HIM TORESTRICT HIS MOVEMENT WE LADDER CLIMBING FOR 3-4 DAYS.

EE PUT HAND ON DOOR LATCH RELEASE LEVER ON LOADER, SWUNG DOOR IN AND DID NOT MOVE HAND. HAND CAUGHT BETWEEN BAR AND RELEASE LATCH. PUNCTURE WOUND TO HAND.

EE WAS LIFTING NORTH END OF RECLAIMER FLIGHT ATTEMPTING TO FREE IT/ REMOVING IT. WHEN IT BROKE FREE, IT SLIPPED OFF CHAIN AND PINCHED LEFT LITTLE FIGNER TIP BETWEEN FLIGTH AND RECLAIMER TRUSS.