Employees were rotating the blow bars in the HSI. This requires hitting with blow bar wedges to loosen them up to remove the blow bar. While hitting the blow bar wedges with a hammer, the wedge came loose and hit injured employee's left middle finger and nail.
Seitz Quarry: 125 citaciones de la MSHA Metal/Non-Metal
Seitz Quarry tiene $20K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Seitz Quarry.
- Muertes
- 0
- Incidentes totales
- 25
- Años en registro
- 1995–2023
- Último incidente
- Dec 2023
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.ⓘ
Una orden bajo la Sección 107(a) retira a los mineros de un área cuando un inspector detecta un peligro inminente. Cada orden se levanta una vez corregida la condición, por lo que esto cuenta las órdenes emitidas, no las que están en vigor ahora.Seitz Quarry tiene $20K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2021-03-17, hace 5 años
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Respirable dust, <.1mg11
- Quartz, respirable, >1% Qtz4
- Nuisance dust, respirable, <1% Qtz1
- Unlisted Particulate, respirable, <1% Qtz1
Ver los análisis individuales (17)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2021-03-17 | Respirable dust, <.1mg | 0 | Backhoe Operator | ||
| 2021-03-17 | Respirable dust, <.1mg | 0 | Electrician Helper | ||
| 2021-03-17 | Unlisted Particulate, respirable, <1% Qtz | 0.15 | Drill Operator, Rotary Air | ||
| 2021-03-17 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2021-03-17 | Respirable dust, <.1mg | 0 | Supervisor, Co. Official | ||
| 2017-07-11 | Quartz, respirable, >1% Qtz | 0.14 | 1.58 | 0.09 | Front-end Loader Operator |
| 2017-07-11 | Quartz, respirable, >1% Qtz | 1.22 | 2.7 | 0.45 | Crusher Oper/Worker |
| 2015-05-28 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2015-05-28 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2009-06-02 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2009-06-02 | Nuisance dust, respirable, <1% Qtz | 0.12 | 10 | 0.01 | Front-end Loader Operator |
| 2009-06-02 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2009-06-02 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2002-04-03 | Respirable dust, <.1mg | 0 | Drill Operator, Rotary | ||
| 2002-04-03 | Quartz, respirable, >1% Qtz | 0.69 | 1.44 | 0.48 | Front-end Loader Operator |
| 2002-04-03 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2002-04-03 | Quartz, respirable, >1% Qtz | 0.16 | 0.85 | 0.19 | Crusher Oper/Worker |
Seitz Quarry registró 0.00 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2020.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2020 * | 0.00 | 0.00 | 0.000 |
| 2019 * | 9.59 | 9.59 | 0.000 |
- Haith Lime & Rock Company 1950 a 1983
- Seitz Quarry 1983 a 1997
- Beatrice Concrete Company Inc 1997 a 2015
- Beatrice Concrete Company 2015 al presente
| Año | Empleados |
|---|---|
| 2026 | 8 |
| 2025 | 8 |
| 2024 | 7 |
| 2023 | 8 |
| 2022 | 8 |
| 2021 | 8 |
| 2020 | 7 |
| 2019 | 8 |
| 2018 | 8 |
| 2017 | 8 |
| 2016 | 8 |
| 2015 | 6 |
| 2014 | 6 |
| 2013 | 6 |
| 2012 | 6 |
| 2011 | 6 |
| 2010 | 6 |
| 2009 | 6 |
| 2008 | 6 |
| 2007 | 6 |
| 2006 | 5 |
| 2005 | 5 |
| 2004 | 5 |
| 2003 | 5 |
| 2002 | 6 |
| 2001 | 7 |
| 2000 | 6 |
Seitz Quarry se ubica en Gage County, Nebraska, donde la categoría minera del Censo representa el 0.1% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 4,693 | 0 | 0 | 0.0 |
| 2026 Q1 | 3,737 | 2 | 1 | 535.2 |
| 2025 Q4 | 4,477 | 0 | 0 | 0.0 |
| 2025 Q3 | 4,596 | 0 | 0 | 0.0 |
| 2025 Q2 | 3,890 | 1 | 0 | 257.1 |
| 2025 Q1 | 3,849 | 1 | 1 | 259.8 |
| 2024 Q4 | 3,731 | 0 | 0 | 0.0 |
| 2024 Q3 | 4,721 | 0 | 0 | 0.0 |
Mostrar 98 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 4,316 | 2 | 0 | 463.4 |
| 2024 Q1 | 3,495 | 0 | 0 | 0.0 |
| 2023 Q4 | 3,480 | 2 | 0 | 574.7 |
| 2023 Q3 | 4,559 | 0 | 0 | 0.0 |
| 2023 Q2 | 5,002 | 2 | 0 | 399.8 |
| 2023 Q1 | 3,712 | 0 | 0 | 0.0 |
| 2022 Q4 | 4,918 | 10 | 1 | 2033.3 |
| 2022 Q3 | 4,436 | 0 | 0 | 0.0 |
| 2022 Q2 | 4,743 | 1 | 0 | 210.8 |
| 2022 Q1 | 3,946 | 1 | 0 | 253.4 |
| 2021 Q4 | 4,202 | 0 | 0 | 0.0 |
| 2021 Q3 | 3,707 | 5 | 2 | 1348.8 |
| 2021 Q2 | 5,255 | 0 | 0 | 0.0 |
| 2021 Q1 | 4,828 | 6 | 1 | 1242.8 |
| 2020 Q4 | 4,904 | 0 | 0 | 0.0 |
| 2020 Q3 | 5,248 | 1 | 1 | 190.5 |
| 2020 Q2 | 5,028 | 0 | 0 | 0.0 |
| 2020 Q1 | 5,938 | 7 | 2 | 1178.8 |
| 2019 Q4 | 5,453 | 0 | 0 | 0.0 |
| 2019 Q3 | 5,541 | 1 | 0 | 180.5 |
| 2019 Q2 | 5,623 | 0 | 0 | 0.0 |
| 2019 Q1 | 4,229 | 1 | 0 | 236.5 |
| 2018 Q4 | 4,191 | 0 | 0 | 0.0 |
| 2018 Q3 | 4,470 | 0 | 0 | 0.0 |
| 2018 Q2 | 4,979 | 1 | 0 | 200.8 |
| 2018 Q1 | 3,582 | 0 | 0 | 0.0 |
| 2017 Q4 | 4,504 | 2 | 1 | 444.0 |
| 2017 Q3 | 4,481 | 1 | 0 | 223.2 |
| 2017 Q2 | 4,657 | 0 | 0 | 0.0 |
| 2017 Q1 | 4,463 | 0 | 0 | 0.0 |
| 2016 Q4 | 4,542 | 2 | 2 | 440.3 |
| 2016 Q3 | 4,891 | 1 | 0 | 204.5 |
| 2016 Q2 | 4,617 | 0 | 0 | 0.0 |
| 2016 Q1 | 4,527 | 0 | 0 | 0.0 |
| 2015 Q4 | 4,032 | 2 | 1 | 496.0 |
| 2015 Q3 | 4,087 | 0 | 0 | 0.0 |
| 2015 Q2 | 3,942 | 1 | 0 | 253.7 |
| 2015 Q1 | 3,152 | 0 | 0 | 0.0 |
| 2014 Q4 | 3,851 | 1 | 0 | 259.7 |
| 2014 Q3 | 3,859 | 0 | 0 | 0.0 |
| 2014 Q2 | 3,302 | 2 | 1 | 605.7 |
| 2014 Q1 | 3,306 | 1 | 0 | 302.5 |
| 2013 Q4 | 3,790 | 0 | 0 | 0.0 |
| 2013 Q3 | 4,161 | 0 | 0 | 0.0 |
| 2013 Q2 | 3,908 | 2 | 0 | 511.8 |
| 2013 Q1 | 3,629 | 0 | 0 | 0.0 |
| 2012 Q4 | 3,638 | 0 | 0 | 0.0 |
| 2012 Q3 | 4,062 | 0 | 0 | 0.0 |
| 2012 Q2 | 4,060 | 0 | 0 | 0.0 |
| 2012 Q1 | 3,174 | 0 | 0 | 0.0 |
| 2011 Q4 | 3,297 | 0 | 0 | 0.0 |
| 2011 Q3 | 3,412 | 0 | 0 | 0.0 |
| 2011 Q2 | 3,804 | 1 | 1 | 262.9 |
| 2011 Q1 | 3,180 | 0 | 0 | 0.0 |
| 2010 Q4 | 2,529 | 3 | 0 | 1186.2 |
| 2010 Q3 | 3,190 | 0 | 0 | 0.0 |
| 2010 Q2 | 3,522 | 3 | 0 | 851.8 |
| 2010 Q1 | 3,660 | 0 | 0 | 0.0 |
| 2009 Q4 | 2,980 | 2 | 0 | 671.1 |
| 2009 Q3 | 3,138 | 0 | 0 | 0.0 |
| 2009 Q2 | 3,177 | 4 | 2 | 1259.0 |
| 2009 Q1 | 2,871 | 1 | 0 | 348.3 |
| 2008 Q4 | 3,572 | 0 | 0 | 0.0 |
| 2008 Q3 | 3,807 | 5 | 0 | 1313.4 |
| 2008 Q2 | 3,987 | 0 | 0 | 0.0 |
| 2008 Q1 | 3,518 | 3 | 0 | 852.8 |
| 2007 Q4 | 4,053 | 0 | 0 | 0.0 |
| 2007 Q3 | 4,250 | 0 | 0 | 0.0 |
| 2007 Q2 | 4,080 | 1 | 0 | 245.1 |
| 2007 Q1 | 3,448 | 1 | 0 | 290.0 |
| 2006 Q4 | 3,590 | 0 | 0 | 0.0 |
| 2006 Q3 | 2,971 | 0 | 0 | 0.0 |
| 2006 Q2 | 2,575 | 0 | 0 | 0.0 |
| 2006 Q1 | 2,250 | 13 | 0 | 5777.8 |
| 2005 Q4 | 2,414 | 0 | 0 | 0.0 |
| 2005 Q3 | 2,644 | 0 | 0 | 0.0 |
| 2005 Q2 | 3,119 | 0 | 0 | 0.0 |
| 2005 Q1 | 2,919 | 0 | 0 | 0.0 |
| 2004 Q4 | 2,953 | 3 | 2 | 1015.9 |
| 2004 Q3 | 3,062 | 0 | 0 | 0.0 |
| 2004 Q2 | 3,135 | 3 | 1 | 956.9 |
| 2004 Q1 | 2,518 | 0 | 0 | 0.0 |
| 2003 Q4 | 2,481 | 0 | 0 | 0.0 |
| 2003 Q3 | 2,529 | 1 | 0 | 395.4 |
| 2003 Q2 | 2,056 | 0 | 0 | 0.0 |
| 2003 Q1 | 2,174 | 0 | 0 | 0.0 |
| 2002 Q4 | 2,345 | 0 | 0 | 0.0 |
| 2002 Q3 | 2,660 | 0 | 0 | 0.0 |
| 2002 Q2 | 3,131 | 0 | 0 | 0.0 |
| 2002 Q1 | 4,378 | 0 | 0 | 0.0 |
| 2001 Q4 | 4,574 | 0 | 0 | 0.0 |
| 2001 Q3 | 4,114 | 0 | 0 | 0.0 |
| 2001 Q2 | 4,366 | 0 | 0 | 0.0 |
| 2001 Q1 | 3,611 | 0 | 0 | 0.0 |
| 2000 Q4 | 3,234 | 2 | 0 | 618.4 |
| 2000 Q3 | 3,632 | 0 | 0 | 0.0 |
| 2000 Q2 | 2,522 | 2 | 0 | 793.0 |
| 2000 Q1 | 3,991 | 0 | 0 | 0.0 |
Incidentes reportables
25 en archivo2023 · 2 incidentes
EE was using a bar to rotate conveyor belt. Bar slipped, EE stumbled and felt EE's knee pop. EE moved aside, within a minute or two, EE indicated to other employees EE might pass out. EE did pass out for 15-30 seconds. Other employees caught EE before EE fell. EE was taken to Emergency Room. Diagnosed with a sprained knee.
2022 · 1 incidente
EE finished making a weld on the excavator bucket, EE lifted welding helmet to chip and clean up what had just been welded and a slag fragment got in eye.
2019 · 1 incidente
Employee was walking toward the shop when the employee slipped. Snow slick surface.
2017 · 1 incidente
Walking along pipeline when right knee dislocated.
2016 · 2 incidentes
Shoveling under conveyors & over-exerted self.
Buffing crusher parts before reinstalling back together.
2014 · 2 incidentes
Employee was over around crushing plant greasing when stepped on rock twisting left knee.
Installing discharge chute on conveyor screen when it slipped pinching the right thumb while aligning the bolt holes.
2013 · 1 incidente
Operator was helping change wear plate on loader bucket weighing less than 50 lbs
2011 · 2 incidentes
While doing maintenance on conveyor #2123, slipped in mud causing contact with pipe support for conveyor.
When holding metal up to be welded in place is when the arc flash occurred.
2010 · 2 incidentes
Setting screens in place when one screen slipped, catching EE's left middle finger between the two screens, EE was wearig gloves.
EE was shoveling wet & heavy materials from around conveyors when he dislocated disc in his lower back. EE did not receive medical help until 10/13/10.
2009 · 2 incidentes
Pulling on a ratchet tightening screen bolts. Note: Injury was not reported until employee went to Dr. on 3/17/09.
Pouring oil in the used oil tank, twisted lower left arm. (April 16, 2009 went to dr for check up on left elbow no follow up necessary and no restriction). by 320091130025
2007 · 2 incidentes
Employee was using a utility knife to cut open a stick of blaster dynamite while loading a rock blast not realizing the position of his fingers.
Stepped on a small rock, rock moved, lost balance and fell against a large rock. Struck his left shoulder, causing a dislocation of his left shoulder.
2006 · 1 incidente
Greasing crushing equipment, he stepped on a rock and twisted left knee, tearing ligaments in the knee.
1999 · 1 incidente
CLEANING OF OIL SOTRAGE BUILDING
1998 · 2 incidentes
EMPLOYEE WENT TO LIFT TONGUE ON COMPRESSOR TO HOOK UP.
WHILE WELDING AND GRINDING ON R9OCK CRUSHER A PIECE OF METAL SUBSTANCE ENTERED LEFT EYE CAUSING THE INJURY. SAFETY EYE PROTECTION WAS BEING WORN AT THE TIME OF THE INJURY.
1997 · 1 incidente
CLEANING ROCKCRUSHER HOPPER OUT, AND WHILE DOINGSO A ROCK CAME SLIDING DOWN STRIKING OPERATORS LEFT FOOT, CAUSING A HAIRLINE FRACTURE.
1996 · 1 incidente
WHILE PULLING ON CABLE TO ATTACH TO BREAKING BALL, PULLED TOO HARD, TORE MUSCLE AT TOP OF PELVIS.
1995 · 1 incidente
STEPPING FROM THE LOADER PLATFORM ONTO THE TRUCKTIRE. HE DID NOT USE LADDER PROVIDED. HE LOST HIS BALANCE & FELL ON HIS BACK SIDE.