Lifting box of glue and felt "pop" in lower back.
Simpson Branch Coal
Simpson Branch tiene $29K en multas propuestas de MSHA y $280 pendientes en 0 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Simpson Branch.
- Muertes
- 0
- Incidentes totales
- 13
- Años en registro
- 2005–2009
- Último incidente
- Feb 2009
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Simpson Branch tiene $29K en multas propuestas de MSHA y $280 pendientes en 0 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.El muestreo de MSHA en Simpson Branch muestra un polvo respirable de carbon promedio de 0.73 mg/m3 (90% en cumplimiento) en 222 muestras.
ⓘ
Una muestra es una medicion de cumplimiento en un momento dado, no un historial de exposicion individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbon y silice corresponden a instalaciones de carbon. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2009 Q2 | 0 | 0 | 0 | |
| 2009 Q1 | 7,957 | 2 | 0 | 251.4 |
| 2008 Q4 | 9,014 | 7 | 1 | 776.6 |
| 2008 Q3 | 8,512 | 11 | 5 | 1292.3 |
| 2008 Q2 | 10,893 | 8 | 2 | 734.4 |
| 2008 Q1 | 8,941 | 9 | 2 | 1006.6 |
| 2007 Q4 | 14,128 | 7 | 1 | 495.5 |
| 2007 Q3 | 12,611 | 18 | 5 | 1427.3 |
Mostrar 11 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2007 Q2 | 12,771 | 10 | 3 | 783.0 |
| 2007 Q1 | 13,353 | 10 | 6 | 748.9 |
| 2006 Q4 | 13,628 | 14 | 4 | 1027.3 |
| 2006 Q3 | 12,300 | 14 | 5 | 1138.2 |
| 2006 Q2 | 11,467 | 4 | 2 | 348.8 |
| 2006 Q1 | 11,519 | 8 | 3 | 694.5 |
| 2005 Q4 | 12,941 | 14 | 6 | 1081.8 |
| 2005 Q3 | 9,271 | 4 | 1 | 431.5 |
| 2005 Q2 | 11,695 | 6 | 2 | 513.0 |
| 2005 Q1 | 7,252 | 21 | 6 | 2895.8 |
| 2004 Q4 | 2,445 | 2 | 1 | 818.0 |
Incidentes reportables
13 en archivo2009 · 1 incidente
2008 · 3 incidentes
The arm was mined in march 06. We had a fall in June 06. Soft top and water in a drainage contributed. This was a continuation of the fall. It blocked travel beyond this pain. The area will be sealed.
The fall occurred in the left rooms off #7 Mains 180' inby spad 938. The rooms were toward the outcrop and water had developed in roof.
Mining was stopped in the area 45 days before the fall occurred because of weight problems. There is a coal seam elevation in the area. It occurred inby spad #874 & 882. It is examined weekly.
2007 · 2 incidentes
A horseback fault runs across the section. It had been cut down when it was seen. The intersection in #1 entry failed. 18' x 30' x 7'. The area was cribbed and dangered off.
A hill seam or horse back runs across the section. It had been cut down on both sides of the fall. Intersection of #5 at spad #792.
2006 · 5 incidentes
Was moving miner cable out of roadway and twisted right knee, straining muscle.
This fall was a continuation of earlier fall on 6/29/06. Water in the top weakened the intersection in #1 & #2. Foreman heard the fall. It blocked the main return for travel but not ventilation. The men were brought below the area until investigation by MSHA. Spad 418.
The area of the fall between #3 & #4 entry in the #4 belt outby had several cribs built. The roof became wet and fell between the cribs. The fall is near spad #407. More cribs were built and 10' rope bolts installed before face work began.
Pulling torque shaft off side of miner head motor and strained neck & back.
A non-injury bottom fall occurred. The bottom or floor of the #5 entry sagged down. The local MSHA office was informed. A seal over the bottom "floor" was erected.
2005 · 2 incidentes
Employee was drilling a hole with a bolter wrench when the bolter wrench hit him on the top of the hand.
Employee was bolting top when he he stopped and sat on his machine and laid back with his face up, towards the top. A piece of scale fell on him.
The full compliance file on Simpson Branch
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.