Mining Incidents

Talons Cove Metal/Non-Metal

TM Crushing, LLC · Surface
Controlada por John D Hadfield
Eagle Mountain, Utah Condado, UT  ·  Activa
ID de mina MSHA: 4202544

Talons Cove tiene $435K en multas propuestas de MSHA y $31 pendientes en 12 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en Talons Cove.

Muertes
0
Incidentes totales
10
Años en registro
2010–2025
Último incidente
Jun 2025
Historial de cumplimiento
Citaciones de MSHA desde 2010
246
citaciones
92
significativas y sustanciales
$434,799
multas propuestas
$363,771
pagado a la fecha
84% de las multas propuestas pagadas a la fecha, una diferencia de $71,028.
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Actividad de inspección
Inspecciones de MSHA desde 2010
60
inspecciones registradas
1,272
horas de inspección
19.3
citaciones por 100 horas de inspección
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.
246 citaciones en 1,272 horas de inspección.
Fuente: datos de inspecciones de MSHA, actualizados semanalmente.

Talons Cove tiene $435K en multas propuestas de MSHA y $31 pendientes en 12 expedientes impugnados.

Disposicion de multas
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.
$435K
multas propuestas
$364K
evaluacion actual
$364K
pagado a la fecha
$31
pendiente
237 evaluaciones son ordenes finales; 12 expedientes impugnados.
Al ultimo periodo de evaluacion el 2025-11-18.
Fuente: datos de infracciones evaluadas y de conferencia/litigio de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2025 Q4 11,998 3 0 250.0
2025 Q3 10,146 6 1 591.4
2025 Q2 11,579 4 2 345.5
2025 Q1 10,042 0 0 0.0
2024 Q4 10,092 3 0 297.3
2024 Q3 10,932 0 0 0.0
2024 Q2 10,645 6 1 563.6
2024 Q1 8,555 0 0 0.0
Mostrar 55 trimestres anteriores
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2023 Q4 10,651 14 5 1314.4
2023 Q3 11,991 5 1 417.0
2023 Q2 13,323 0 0 0.0
2023 Q1 10,609 7 1 659.8
2022 Q4 12,635 0 0 0.0
2022 Q3 11,312 8 3 707.2
2022 Q2 13,498 0 0 0.0
2022 Q1 15,946 4 0 250.8
2021 Q4 16,498 0 0 0.0
2021 Q3 17,147 4 2 233.3
2021 Q2 17,100 0 0 0.0
2021 Q1 16,190 0 0 0.0
2020 Q4 14,668 2 0 136.4
2020 Q3 14,994 3 1 200.1
2020 Q2 14,401 0 0 0.0
2020 Q1 14,100 0 0 0.0
2019 Q4 14,767 21 15 1422.1
2019 Q3 17,219 10 3 580.8
2019 Q2 18,909 0 0 0.0
2019 Q1 18,891 15 3 794.0
2018 Q4 19,524 10 5 512.2
2018 Q3 19,570 20 4 1022.0
2018 Q2 19,711 3 1 152.2
2018 Q1 17,439 12 3 688.1
2017 Q4 15,005 0 0 0.0
2017 Q3 15,391 4 4 259.9
2017 Q2 13,991 0 0 0.0
2017 Q1 12,279 4 0 325.8
2016 Q4 13,941 0 0 0.0
2016 Q3 4,596 4 0 870.3
2016 Q2 12,831 4 4 311.7
2016 Q1 9,651 1 0 103.6
2015 Q4 11,150 0 0 0.0
2015 Q3 11,775 3 0 254.8
2015 Q2 9,511 0 0 0.0
2015 Q1 6,175 2 2 323.9
2014 Q4 8,225 0 0 0.0
2014 Q3 7,329 12 4 1637.3
2014 Q2 6,801 0 0 0.0
2014 Q1 6,878 0 0 0.0
2013 Q4 7,331 2 1 272.8
2013 Q3 7,184 2 0 278.4
2013 Q2 8,725 12 6 1375.4
2013 Q1 7,704 6 2 778.8
2012 Q4 5,549 0 0 0.0
2012 Q3 6,329 0 0 0.0
2012 Q2 5,897 0 0 0.0
2012 Q1 4,799 4 3 833.5
2011 Q4 6,279 13 8 2070.4
2011 Q3 7,676 2 1 260.6
2011 Q2 6,825 0 0 0.0
2011 Q1 2,268 4 1 1763.7
2010 Q4 3,479 0 0 0.0
2010 Q3 3,671 7 5 1906.8
2010 Q2 3,109 0 0 0.0
No se registran muertes en esta mina.

Incidentes reportables

10 en archivo

2025 · 1 incidente

2 de junio de 2025 UT · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina MANEJO DE MATERIALES
TM Crushing, LLC · Sobreesfuerzo, no clasificado en otra parte

Employee was carrying a roller can walking down a slight incline when they slipped causing them to break their left ankle. There was loose material on incline, and work boot did not have sufficient ankle support.

2022 · 2 incidentes

26 de septiembre de 2022 UT · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador RESBALÓN O CAÍDA DE PERSONA
TM Crushing, LLC · Sobreesfuerzo, no clasificado en otra parte

Miner was getting up into loader and missed the first step with foot, straining left shoulder. Initial treatment was first aid and doctor visit to provide diagnosis. Remained at a shoulder strain without medical treatment until we were notified of a cortisone injection on 12/09/2022. At which time, we feel it became a reportable injury.

12 de abril de 2022 UT · Metal/No metálico Minero, Prospector, no clasificado en otra parte HERRAMIENTAS MANUALES (SIN MOTOR)
TM Crushing, LLC · Golpeado por... no clasificado en otra parte

EE (the miner) was cutting a conveyor belt when EE slipped with the knife and cut leg. EE was cutting towards the body. The cut required stitches and caused no permanent or long term impairment. Returned to work the next day.

2021 · 1 incidente

26 de enero de 2021 UT · Metal/No metálico Minero, Prospector, no clasificado en otra parte RESBALÓN O CAÍDA DE PERSONA
TM Crushing, LLC · Caída a la pasarela o superficie de trabajo

The miner was walking from vehicle towards the plant, minutes after the weather had cleared. It had been snowing previously for several hours and there were 2 inches of new snow accumulation on the ground. The miner slipped on the ice and snow from the recent snow storm and injured ankle. Miner was taken to doctor to get ankle examined.

2020 · 1 incidente

15 de julio de 2020 UT · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador MANEJO DE MATERIALES
TM Crushing, LLC · Golpeado por... no clasificado en otra parte

Miner was assisting to remove a large rock from a clogged jaw crusher. The miners were locked out, tagged and tied off. The rock was suspended during removal and EE placed foot on the lip of the jaw, contrary to training to stay clear of the jaw. EE's foot was in an unprotected position when the load moved and the rock collided with EE's left foot.

2018 · 1 incidente

9 de octubre de 2018 UT · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina MANEJO DE MATERIALES
TM Crushing, LLC · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

Miner bypassed the guard to access V belt on the head pulley Motor belt. After checking the tension of the V belt with fingers, the operator in the tower started the belt without sounding the alarm. This resulted in the Miner getting fingers entangled in the belt and pulley. The miner lost the tips of three fingers.

2014 · 1 incidente

13 de noviembre de 2014 UT · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo RESBALÓN O CAÍDA DE PERSONA
TM Crushing, LLC · Caída desde una máquina

While working on the dozer the mechanic stepped down onto the track and slipped. He fell down about 5' and hit his head. He received stitches. Employee stated that he was using 3 point contact climbing but that his hands were greasy and could not hold his grip when he lost his footing.

2013 · 2 incidentes

21 de noviembre de 2013 UT · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador HERRAMIENTAS MANUALES (SIN MOTOR)
TM Crushing, LLC · Golpeado por objeto proyectado

Using a wire brush to clean and got debris in his eye. Required prescription for eye.

5 de agosto de 2013 UT · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador HERRAMIENTAS MANUALES (SIN MOTOR)
TM Crushing, LLC · Golpeado contra un objeto fijo

Sliced finger while working on machinery. Required stitches.

2010 · 1 incidente

27 de agosto de 2010 UT · Metal/No metálico Cargador frontal, Operador de pala-traílla, Operador de traílla, Cargador (payloader), Operador de equipo de traílla RESBALÓN O CAÍDA DE PERSONA
TM Crushing, LLC · Caída desde una máquina

Loader operator was refilling coolant when he slipped and fell off of loader. Operator sustained minor back injury.

For insurers, brokers, and safety consultants

The full compliance file on Talons Cove

A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.