Buscar en el registro

Employee was checking the 120 volt UV input on the 4912 feeder when the meter lead slipped out of hand and as the employee grabbed for the meter lead little finger inadvertently touched an energized lead causing the employee to be pulled back landing on left shoulder.

Employee was changing the breaker on the 244 dryer in prep-plant and as he was removing the breaker something flashed burning top of right hand.

Employee was preparing to disconnect wiring in box, moved ground wire, arc flash burned hands and knocked backwards.

trouble shooting feeder circuit inadvertently touched meter lead to top of breaker meter flashed.

Miner inhaled smoke from a power center that failed. This miner did not begin missing work until 5/29/2009.

Employee walked up to and leaned on shuttle car while cable was being shecked with thumper--shocked arm and upper body.

EMPLOYEE STATED HE WAS LOADING SHUTTLE CAR TRAILING CABLE WHEN HE RECEIVED AN ELECTRICAL SHOCK & BURN TO HIS RIGHT HAND.

EE WAS REMOVING DUST COVER FROM RECEPTACLE AND RECEIVED BURN TO RIGHT HAND.

ELECTRICIAN STATED WHILE USING A 310 TRIPPLET VOLT METER CHECKING 9.95 VOLTS PHASE TO PHASE ON THE SOUTH MAIN FEEDER WHEN THE METER BLEW UP.

EMPLOYEE WAS REPLACING A LEAD IN A BATTERY RECEPTACLE ON THE SHIELD HAULER WHEN CONDUCTORS BECAME GROUNDED. EMPLOYEE RECEIVED ELECTRICAL SHOCK CAUSING 1ST AND 2ND DEGREE BURNS TO HIS RIGHT AND LEFT HAND.

EE AND ANOTHER EMPLOYEE WERE TROUBLE SHOOTING THE ELECTRICLA CIRCUIT IN THE CONTROL PANEL OF THE CONTINUOUS MANER WHEN THERE WAS SUDDEN FLASH OF FIR ECAUSING 1ST AND 2ND DEGREE BURNS TO BOTH H ANDS & 1ST DEGREE BURNS TO HIS FACE.

THE INJURED STATED THAT HE WAS IN THE PROCESS OF MAKING SOME ELECTRICAL CHECKS AT THE 10E #1 HEADER TRANSFORMER WHEN HE LEANED OVER TO ENGAGE THE 100 AMP/440 BREAKER WITH HIS RIGHT HAND UNAWAR E THAT THE PROTECTIVE COVER WAS MISSING FROM THETOP OF THE BREAKER. HIS RIGHT HAND CAME IN CONTACT WITH ONE OF THE LEADS CAUSING THE ELECTRICAL SHOCK.

POWER FAILURE AT NORTHEAST OIL BREAKER SWITCH INMAIN SUB STATION AFTER POWER PUT BACK IN GROUND FAILURE HAPPENED OIL SWITCH BLEW UP CAUSING BURNS TO TWO EMPLOYEES

POWER FAILURE AT NORTHEAST OIL BREAKER SWITCH IN MAIN SUBSTATION. AFTER BREAKER WAS RESET A GROUND FAILURE OCCURRED AT OIL SWITCH CAUSING SWITCH TO BLOW UP CAUSING FIRST, SECOND, AND THIRD DEG REE BURNS TO TWO EE.

INJURED WAS ASSISTING RAM CAR OPERATOR IN CHANGING BATTERIES WHEN THE JUMPER CABLE HE WAS HOLDING BECAME GROUNDED(SHORTED OUT) AND CAUGHT FIRE AAND CAUSED 2ND DEGREE BURNS TO HIS LEFT HAND.

EE WAS TROUBLE SHOOTING AN 820 RAM CAR PANEL WHEN HIS HAND SLIPPED AND HIS ARM HIT THE POWER BAR CAUSING AN ELECTRICAN SHOP.

EMPLOYEE WAS INSTALLING OIL SEPERATOR ON 60 R DRILL.HE WAS LEANING AGAINST HOUISNG ON HIS LEFT SIDE AND HOLDING TOP WITH LEFT ARM A BOLT OF LIGHTNONG STRUCK THE AREA SHOCKING HIM.

EMPLOYEE WAS REPLACING AN INSULATOR ON THE TROLLEY WIRE. THE TOOL HE WAS USING CAME IN CONTACT WITH THE TROLLEY WORE AND CAUSED AN ELECTRICAL ARC AND FLASH CAUSING BURNS TO HIS RIGHT HAND.

THE INJURED WAS TRYING TO RE-SET A CIRCUIT BREAKER ON A POWER CENTER. THE BREAKER BLEW-UP IN HIS HANDS.

EMPLOYEE WAS PU4PING GAS WHEN LIGHTENING STRUCK NEAR PUMP. EMPLOYEE HAD HIS HAND ON PUMP AND SURGE WENT THROUGH HIS ARM BURNING HIS FOREARM.

EMPLOYEE BURNED3FINGER WHEN RING GROUNDED OUT BETWEEN METAL & WELDING MACHINE.

EMP WAS HELPING3AN ELECTRICIAN CRIMP A WELDING CABLE THE CRIMPER CAME IN CONTACT WITH THE WELDING CABLE GROUND CAUSING AN ARC THE ARC FLASH BURNED THE EMPLOYEES EYES

EMP WAS CRIMPIN1 A WELDING CABLE THE CRIMPER CAME IN CONTACT WITH THE WELDING CABLE GROUND CAUSING AN ARC THE ARC THROUGH THE CRIMPER BURNED HIS HAND

EMPLOYEE WAS US3NG A HAND-HEAD DRILL WHILE DRILLING INTO A 10IN PVC PIPE WATER GOT INTO DRILL 2ND SHOCKED(SCARED) HIM HE JUMPED & TWISTED HIS RT LEG & HIP

THE INJURED WAS TROUBLESHOOTING IN A HEADER STARTER BOX AND HIS PLYERS TOUCHED TWO LEAD WIRES. IT FLASHED UP CAUSING THE BURN.

AT 4:15 AM ON SECTION 3104 EMPLOYEE WAS CHECKING THE SECTION POWER CENTER TO DETERMINE IFG THETHE PROPER VOLTAGE WAS BEING SUPPLIED TO THE 800 AMP BREAKER SERVING THE 14 CM 8 CONTINUOUS MINER. HE HAD CHANGED THE POWER TAP CONNECTIONS RAISING THE SERVICE VOLTAGE FROM 440 VAC TO 550 VAC WHILE HOLDING HIS TEST METER IN HIS LEFT HAND HE PLACED HIS TEST PROBES ACROSS TWO P

EMPL ELECTRICIAN ALLOWED GROUND WIRE TO COME IN CONTACT WITH HOT WIRE IN LEVELLING PANLE ON 5761 MARION SHOVEL CAUSING ELECTRICAL FLASH AND FIRE-BURNED HANDS AND FACE.

THE INJURED WAS OPERATION A PORTAL BUS WHEN THE CONTROL BOX BLEW OUT, AND BURNED HIS LEG.

CONNECTING THE BATTERY TO THE RAM CAR WHEN THE BATTERY EXPLODED MR HODGE WAS CAUGHT BETWEEN THE LID OF THE BATTERY AND THE MINE ROOF

THE INJURED WAS TRYING TO PUT BACK THE LOW VOLTAGE RELEASE WITH THE POWER STILL ON THE BREAKER.

PULLING MINER CABLE WHEN HE GOT INTO SKIMED PLACE ON CABLE

THE INJURED WAS OPERATING LOCOMOTIVE AND HAD LAYED A CHAIN ON TOP OF THE LOCOMOTIVE AND IT HAD WORKED ITSELF DOWN TO THE RESISTOR AND THE INJURED REACHED TO PULL IT OUT AND BURN HIS HAND