Buscar en el registro

EE was replacing a lip shroud on an Esco dragline bucket. While removing the wedge that locks the lip shroud to the bucket, the lip shroud fell (10 inches) onto the EE's feet. The bucket was located in the welding shop. EE was wearing steel toed boots.

Employee and Co-worker were down Slope 3 attempting to set a suction hose into a sump. The hole in the ice was not very large and both miners had to hold the pipe above their shoulders to get the end into the sump. EE was behind Co-worker when they were handling the poly pipe and stated after they had the pipe set that EE slipped a bit and felt something in EE's back.

Employee tried lifting a 4" poly pipe that was plugged with mud to try and clear the pipe. When the employee dropped the pipe, they felt something was wrong with their lower back.

EE was cleaning a scraper tire fender. EE thinks that is when the left knee was injured. EE had a limp at the end of shift.

A mechanic was removing a park brake from a 993K loader. The park brake weighs approx. 300lbs. and shifted as EE was positioning for removal. The EE pinched their RT middle finger tip, resulting in sutures to close the wound.

Miner was cleaning grease with pre-solve on dragline walk. It was hot outside and they were sweating they took their glasses off to wipe sweat away from the Rt. eye. Miner forgot they had pre-solve on their glove, getting sweat and chemical in an eye. Antibiotic applied.

Miner was having problems with rt. elbow, appears to be from a previous surgery non-work related. On July 3rd the mine was informed by WSI the inflammation in the elbow was in a different location where the surgery took place year ago. This appears to have been cause, while pushing on a dragline cable during the re-socketing process in May. Currently on restricted duty

Moving fender from Kress 363 and had dirt fall off and must have got a piece in the eye on 09/27/2018. The miner tried to wash it out. The eye was still irritated on 09/28/2018 dirt piece need to be removed by Ophthalmologist.

Contractor janitor was retrieving an aerosol paint can from a cabinet and removing a wood lath from behind the cabinet when the cabinet and stand tipped over due to damaged leg striking the janitor in the back, causing a bruise to mid and lower back. Prescribed a days dose of Acetaminophen/Hydrocodone

Mechanic was removing a guard between the transfer case and engine on a kress coal truck. They removed 1/2 half of the guard, while handing it to the other mechanic they brushed against the other half embedding a piece of metal in the left elbow 1/2 inch with of human hair, one stich required for removal.

The Miner Mechanic was loading a traffic cone onto holder rod on the back of a Terex water truck and dropped the cone on finger creating a pinch point to the gloved left index finger. It created laceration. Two stitches and tetanus given.

The D10T Dozer operator was getting out the dozer man basket and went to remove a tiling spade from the basket, The spade was in a slot that holds the spade in place. EE reached over left side and grab the shovel. The shovel got stuck and EE pulled it again and felt something pop in lower back.

Miner was changing dozer tilt hose on 9/9/2015, when he felt some sort of dirt particle fall into his left eye. He tried flushing his eye afterwards. The eye was still irritated the next day and was brought to the clinic. The particle was removed and he was prescribed some Tobradex for preventative measures.

During concrete pour line reducer was plugged. When unplugging reducer clamp was removed. After removal reducer fell causing safety whip to tighten and slide up handle. Slid across fingertip and remove 1/2" of left hand ring finger.

The Miner left a note on his time card at the end of his shift 2/26/2010 hurt right rib laying on his rt side working on a motor no medical treatment 3/1/2010 The Miner said he was ok and incident report was filled then. 3/4/2010 he claimed re-injury himself after he coughed. 3/5/2010 he saw the Dr. he return to the next work day and put on lite duty for the week.

The Dragline Mechanic was disposing of a Metal race bearing approximately 15lbs dropping it 8" into a scrap metal bin. The Dragline oiler walked by the bin at the same time. A sliver of steal flew out striking the Dragline Oiler in the Rt. Elblow. The sliver puntured the skin and had to be treated with medication to prevent infection.

The utility crew was moving a section of 6" discharge hose. The hose was covered with a large amount of snow. They hooked a pickup up to pull it out from the deep snow cover. When they pulled the section out, a section of 6" plastic pipe was connected to it came out. This struck just below his Rt knee, restricting his activities for three days.

Employee was working on a cat engine with four 6 ton jackstands. The employee pulled himself up from the hoses on the top of the engine. One of the stands came loose striking the employee. Injury - contusion on right foot and left thumb and scrape on shoulder. New engine stands were built and corrections made.

Employee was removing a small section of hydrulic hose from a storage reel brand "19mm 3/4" LN USA SEA100r12 4000PSI MSHA IC-84/12 H" The section of hose recoiled off the reel striking the employee in scalp causing laceration needing 8 stiches

The ee was climbing up and down off the boom foot and sections to use an optic scope for leveling. the ee began to complain of pain in his groin area.

EE WAS REMOVING A DUST PLUG FROM A COM-LOCK TYPE GREASE COUPLING TO FILL THE BULK GREASER ON A CAT 992 G LOADER. THE SPIRAL WOUND WIRE RING THROUGH THE DUST PLUG HAD BEEN DAMAGED. WHEN THE EE PUT HIS FINGER THROUGH THE RING AND PULLED TO OPEN A PROTRUDING WIRE PUNCHURED HIS FINGER THROUGH HIS LEATHER WORK GLOVE.

EMPLOYEE WAS CHANGING A LIGHT BULB ON A FRONT LIGHT ON HIS DOZER AND WHILE PUTTING THE LENS BACK ON, THE LENS BROKE IN HIS HAND AND CUT HIS FINGER. THE LENS MAY HAVE HAD A CRACK IN IT CAUSING IT TO BREAK.

EMPLOYEE PILED UP COAL WITHT HE FRONT END LOADER AND THOUGHT HE SAW SOME COAL ROCK. HE GOT OFF THE LOADER TO CHECK IT OUT, REACHED OUT TO MOVE A CHUNK AND STRAINED HIS BACK.

BELIEVE THIS TO BE A RESULT OF AN OLD INJURY REPORTED ON 2-27-80 OF A TORN LIGAMENT IN HIS RIGHT KNEE. IT IS EXPECTED TIME LOSS OF 10 DAYS AND 2-3 WEEKS OF RESTRICTED WORK FROM THIS SURGERY.

EMPLOYEE LIFTED UP ON A WATER HOSE AND FELT A PAIN IN HIS LOWER BACK. HE FINISHED HIS SHIFT AND WORKED THE SHIFT THE NEXT DAY. ON THE 12TH OF MARCH HE CALLED AND SAID HE AHD ENTERED THE HOSP ITAL FOR PAIN IN HIS LOWER BACK.

EE WAS GETTING A HELMET FROM LOWER SHELF BY WELDING TABLE AND KNELT DOWN ON RIGHT KNEE. WHEN GETTING UP HE FELT PAIN AND HIS KNEE WOULD NOT EXTEND. HAD ARTHROSCOPIC SURGERY TO REMOVE A PIECE O F TORN CARTLIAGES ON HIS KNE SO HIS KNEE WOULD STRAIGHTEN OUT.

EMPLOYEE WAS MOVING 20-50 POUND BOXES FROM SHELVES TO A HAND CART TO PUT IN STORAGE. HE STATED HE SQUATED DOWN AND LIFTED A BOX AN DFELT A DISCOMFORT IN HIS BACK. EMPLOYEE CALLED ON 12-1 AND SAID HE HAD HURT HIS BACK AND WAS TAKING CHIRO. TREATMENTS.

EE WAS PUTTING A PIECE OF SCRAP METAL INTO RECYCLE BIN & LET THE STEEL SLIDE THROUGH HIS GLOVED HANDS. A SHARP EDGE CUT THROUGH HIS GLOVE & CUT HIS FINGER.

CHANGING CUTTING EDGE ON A 657E SCRAPER AND WHILE SETTING THE EDGE INTO PLACE, PINCHED FINGER BETWEEN NW AND OLD CUTTING EDGE.

EMPLOYEE WAS LIFTING A FIVE GALLON CAN OF ANTI-FREEZE FROM THE GROUND TO ABOUT 2' HIGH INTO THE FUEL TRUCK AND FELT A PAIN IN HIS CHEST. CAN WEIGHT ABOUT 40-45 LBS.

EE WAS HELPING TO LOAD TWO 1-1/2" CABLES INTO A PICKUP BOX. EE MOVED HIS HAND TO GET ANOTHER GRIP ON THE CABLE AND A BROKEN WIRE PUNCTURED HIS HAND THROUGH HIS LEATHER GLOVE.

EE WAS PUTTING SCRAP IRON IN RECYCLE BIN AND A PIECE OF STEEL FROM A GEAR THAT WAS PUT IN THE BIN BROKE OFF AND HIT EE IN THE NOSE.

EMPLOYEE WAS WASHING A SCRAPER WITH A HIGH PRESSURE HOT WATER WASHER & HE WAS PULLING UP EXTRA HOSE UP ON THE SCRAPER & THE SPRAY WAND PASSED OVER HIS BOOT BEHIND THE STEEL TOE & MADE 11/2IN C UT IN HIS BOOT HE STATED HE NEVER RELEASED THE TRIGGER

WAS GOING TO CHANGE OXYGEN TANKS ON THE TORCH.REMOVED CHAIN FROM ROW OF TANKS IN STORAGE RACK AND WHILE REMOVING A TANK,THE TANK FELL FORWARD,SMASHING THE LITTLE FINGER NEEDING 14 STITCHES.

EE WAS LEANING OVER A CABLE SPOOL OF 2 INCH X 68 FT OF CABLE AND CUT THE STAPLE HOLDING THE CABLE END. THE CABLE UNWRAPPED AND STRUCK HIM OF HIS LEFT SIDE OF HIS HEAD ON THE SAFETY GLASSES AND BROKE THE NOSE PAD CUTTING HIS NOSE ON THE LEFTSIDE.

EE WAS BLDG FENCE AND WAS WRAPING THE SECOND WIRE FROM THE TOP AROUND THE CORNER POST AND SCRATCHED HIS ELBOW ON THE TOP WIRE LOOP AND BARB WIRE CUT HIS ELBOW 3/4INCH LONG. HAD TO HAVE 10 STIT CHES IN LEFT ELBOW.

EMPLOYEE I NAME CALLED SAFETY DIRECTOR I NAME ON 03-29-91 & INFORMED ME THAT UPON ARISING ON 03-28-91 A VACATION DAY HE HAD SEVERE BACK PAIN & SAID HE WOULD NOT BE COMING TO WORK UNTIL HE FEL T BETTER & WAS GOING TO SEE A DOC AT THIS TIME HE MADE NO REFERENCE TO THE BACK PAIN BEING JOB RELATED HE USED PERSONAL SICK LEAVE FOR THE NEXT 15 DAYS UPON RETURNING TO WORK ON 04-22-91 I TA

EMPLOYEE HA DODNE PRE-SHIFT INSPECTION OF HIS MOTOR GRADER AND THEN GOT INTO THE CAB. HE THEN PLACED HIS RIGTH HAND ON THE DOOR POST AND USED HIS OTHER HAND TO SHUT THE DOOR AND PINCHED HIS R IGHT THUMB BETWEEN THE DOOR AND POST ON THE HINDGE SIDE. HE RECEIVED TWO STITCHES IN RIGHT THUMB BY THE NAIL.

GETTING UP OUT OF SEAT IN CAB TO GET OUR OF AB TWISTED BACK FELT SEVERE BACK PAIN. OPRER RUBBER TIRE DOZER.

EMPLOYEE WAS DOING AN ELECTRICAL PM WHILE LIFTING A BRAKE COVER IT SLIPPED FROM HIS AHND AND HE REACHED TO CATCH THE COVER AND STRAINED HIS LOWER BACK WHILE GRABBING FOR IT.

EMPL CARRYING 4'' PLASTIC SUCTION HOSE WITH ANOTHER EMPL STUCK HOSE THROUGH HOLE IN ICE,TWISTED BODY AND FELT PAIN IN HIS BACK.