Buscar en el registro

Employee was exiting the maintenance truck and when EE closed the door with left hand, EE felt a pop and pain on the right side of neck.

Helping load a screen bearing in skid steer loader bucket. Bearing rolled pinching finger against side of loader bucket. Went to hospital some stitches required.

While assisting in carrying a wire cable, both employees slipped and fell due to mud conditions. Employee's wrist was cut by the cable by employee falling. Went to Princeton Community Hospital for attention. Treated and released after application of adhesive in lieu of stitches.

Plant operator was cleaning out around overloaded screen unit. While doing the clean out a rock fell on their finger. Plant supt. transported to Bluefield Regional Medical, treated and released. No stitches or sutures.

Employee was handing a box of 1 1/2 inch x 10 inch bolts out the driver side window of a pickup when the box slipped out of his left hand, he tried to grab hold with his right hand and felt a pull in groin area.

While descending steps from operators room at High Cal plant, employee stopped five steps from stairs end to pull a 1 1/2 inch water hose used for cleaning and felt a pain in his right bicep. Sent to hospital for evaluation.

Maintenance work on plant individual was being handed a tool (3 ton come-a-long) by another employee. Finger was caught between the tool and plant frame causing a cut that required 3 stitches.

Injury not reported until 06/11/2013 at 11:15AM Highway Truck driver possible sprain to stomach area while opening hood on truck. Supervisor was present at the time, no indication given as to supervisor by the driver of any injury at that time. Injury reported as noted.

Employee was removing front idler and cannon on Cat D8R dozer. There was a 12"-15" rock wedged between roller frame and main frame. Employee was reaching over push-arm and roller frame to removed rock. Employee felt pain in lower - left area of his back.

Highway delivery truck driver-Removing stone buildup on tailgate apron-Schotched the tailgate to keep the tailgate open in order to clean the area-Wheel choked slipped allowing tailgate to close under its own weight striking the drivers hand.

Individual welding hand rail, rail began to fall he caught rail and by doing so jerked his left arm.

Cleaning out a rock box, loose rock fell and broke finger on left hand.

Employee climbing access ladder to enter cab of machine pulled tendons in right wrist.

Injury to left hand ring finger and small finger. Pinned between engine parts while helping mechanic. Received stiches to both fingers and small finger broken.

Perfroming maintenance, piece of metal hit left foot. Swelling later after going home. Hospital treted and released same evening.

Contractor employee, crushing plant demolition, lacerated hand on rail on manlift. Operator was positioning work platform and hand brushed metal structure.

EE helping maintenance man hook chain up to lifting hook to break loose wedged rock in feeder a loose rock about size of football rolled down about 5' and struck him on right leg. The leg does have a cut about 11/2" long. Supervisor sent man to emergency room.

Pulling air hose in shop to air tire up on truck. Pulled bicep muscle in right arm.

EE WAS HELPING DRILL OPERATOR PULL HOSE WHEN EE FELL AND INJURED LEFT ANKLE

SHOVELING PACKED MATERIAL FROM UNDER TUNNEL CONV. BELT USING A LONG-HANDLED ROUND-POINT SHOVEL. MATERIAL PACKED VERY TIGHTLY AND EE HAD TO USE THRUSTING MOTION & GREAT EFFORT TO DISLODGE, IN ORDER TO SHOVEL & CLEAN. DURING THRUSTING MOTION, THE PACKED MATERIAL BROKE LOOSE & CAUSED EE'S RIGHT WRIST AREA TO STRIKE THE CONVEYOR STRUCTURE. MINE SUPT. FIRST INFORMED OF ACC. 5/21.

EE ASSISTING DRILLER LOAD DRILL STEEL AND HAMMER ONTO DRILL RIG.

MOVING BELT ROLLERS IN STORAGE SHED TO GET TO SPARE TIRES; BELT ROLLER HIT DOOR (WEIGHING APPROX 45-50 LBS) (SIZE 30" X 48") CAUSING LEANED DOOR TO FALL AND STRIKE EMPLOYEE ON SIDE OF LEFT HIP .

WAS DIGGING OUT CRUSHER RUN CHUTE AND MATERIAL FELL IN ON LEFT FOOT.

CORPORATE MAINTENANCE EE MAKING REPAIRS TO OFFICE ROOF CAME IN CONTACT WITH FIBERGLASS INSULATION WHICH CAUSED ALLERGIC REACTION

SHOVELING SPILLED CRUSHED MATERIAL FROM UNDER SURGE CONVEYOR BELT, (BENDING, TWISTING, LIFTING MOTION) FELT PULL IN BACK.

EMPLOYEE WAS OPENING A DRUM OF OIL.HIS HAND SLIPPED AND WAS CUT BETWEEN HIS FINGERS ON HIS RIGHT HAND.

EMPLOYEE WAS INSTALLING SPEED REDUCERWHEN HE STRAINED BACK.

THIS IS A RECURRING BACK STRAIN BROUGHT ON BY PULLING OUT A BIN DIVIDER OUT OF A CHUTE.

EMPLOYEE WAS LIFTING A PORTABLE GENERATOR AND PULLED MUSCLES IN BACK ON LEFT SIDE, UPPER PART OF BACK.

1-EMPLOYEE CUT NOSE WITH WIRE ROPE STRAND.2 STRAINED BACK WHILE WORKING ON BELT.

EMPL WAS PUTTING ON BELT COVERS WHEN HE PULLED MUSCLE IN BACK

EMPLOYEE WAS LIFTING OIL COOLER WHEN HE PULLED GROIN MUSCLE.

EMPL WAS WASHING TRUCK WHEN HE CUT FINGERS ON BUMPER OF TRUCK.

EMPLOYEE ADVISED OUR COMPANY 4:17 PM JULY 1,1989, THAT HE HAD HURT HIS BACK ON EVENING SHIFT JUNE 22,1989. HE STATED HE HURT HIS BACK ASSISTING IN LIFTING A 120 LB DRUM OF 90-W GREASE.

EMPLOYEE WAS ATTEMPTING TO SET SAFETY BLOCKS UNDER TRAILER TONGUE WHEN IT SLIPPED CAUSING INJURY TO RIGHT RING FINGER. BROKE FINGER.

I.NAME WHILE ASSISTING WELDER WAS ATTEMPTING TO FLIP OVER A PIECE OF 3/8 IN THICK X 7 FT WIDE X 8 FT LONG FLAT SHEET METAL DURING PROCESS OF LIFTING METAL I.NAME FELT BACK PAIN

EMPLOYEE WAS WO9KING ON HAMMERMILL. HE AND ANOTHER EMPLOYEE WERE MOVING PART OF THE HAMMERMILL GRATE WHEN THE OTHER EMPLOYEE DROPPED HIS END THEREBY CAUSING HIM TO SMASH HIS FINGERS BETWEEN T HE GRATE AND TH9 HAMMERMILL.

EMPL UNLOADING 7RASHCAN CONTAINING CEMENT OUT OF PICKUP TRUCK.SOME CEMENT SPLASHED OUT OF TRASH CAN AND WENT INTO LEFT EYE.

EMPLOYEE WAS CL2SING HOOD ON TRUCK HE HAD SOME WRENCHES LAYING ON THE FENDER OF TRUCK WHEN THE HOOD CAME DOWN IT HIT A WRENCH THE WRENCH BOUNCED UP AND HIT HIM IN THE NOSE AND ABOVE THE RT EYE A CUT RESULTED3ABOVE THE RT EYE REQUIRING A FEW STITCHES

EMPLOYTEE STATE8 THAT HE NOTICED THAT HIS BACK WAS BEGINNING TO HURT WHEN HE STARTED TO DO SOME REPAIR WORK ON ONE OF THE EUCLIDS. DOES NOT KNOW WHAT HE MIGHT HAVE DONE TO CAUSED HIS BACK TO HURT. 3

EMPLOYEE WAS LIFTING RADIATOR WHEN HE DEVELOPED PAIN IN HIS RT SIDE

EMPLOYEES WERE LOWERING PLYWOOD WHEN IT FELL ON CLAIMANTS FOOT

EMPLOYEE WAS REPLACING ROLLER IN LINK BELT CRANE (DROP BALL) WHEN HE LIFTED THE ROLLER HE RUPTURED HIMSELF.

EMPLOYEE STATED THAT HE CLIMBED INTO THE BED OF HIS TRUCK SEVERAL TIMES DURING THE DAY TO PUNCH LIME DOWN FROM THE BIN WHEN BY THE END OF THE DAY HE NOTICED THAT HIS BACK WAS GETTING WEAKER HE DID NOT THINK THAT THE PROBLEM WAS SERIOUS UNTIL THE NEXT MORNING WHEN HE TRIED TO ARISE