Buscar en el registro

While repairing a Volvo L260H front end loader a wooden block that was supporting a tilt cylinder fell and struck the employee on the back right side of EE's head.

EE was working in the welding stall clean of debris around 48 degrees. EE was working on hydraulic when EE smashed EE's right hand.

EE was filling hydraulic oil in 651 scraper when hand got smashed by the 55 gal. drum. weather 79 degrees wind was blowing 3mph.

Temperature 76 d sunny wind16 mph employee was working in the shop with the door open little to no debris on the ground and a slight dust covering the ground. Employee was tightening bolts on the crusher. The air hose slipped off the fitting

EE was working removing grates from the crusher, the area was clean of debris and was dry, sun was shining temp around 68 degrees good conditions

cloudy day EE was in the 170 box car working on a gearbox, the are was clean off debris and was well lite. EE turned to get/look at another component when the gearbox fell striking right above EE's steal toe boot on EE's left foot.

it was sunny day. they where working to replace a hammer on the crusher. the alignment rod came out and struck the right hand, index finger of the worker. worker was wearing gloves.

Fueling haul truck tripped over fuel hose causing deep bone bruise on right forearm.

Employee was changing a bearing on a haul truck and bearing fell on right hand.

Strained left shoulder while lifting bucket. Note: Complications arose several days later. The company at first didn't know they were related.

Employee was attempting to remove belt from pulley while pulley still in motion. Index finger on left hand was fractured.

Working on bus strained L knee climbing into drivers seat

Hydraulic cylinder fell on left thumb.

Tripped carrying water cooler strained Left shoulder.

Corneal foreign body

Welder box lid fell on EE's right arm.

Was reaching up to retrieve parts from parts bend. Pulled groin. Double hernia. Happened on 16 March 2011, reported 24 March 2011.

Lifting ladder strained his back.

Foreign body flew behind safety glasses.

Using shovel to clean crusher pulled back.

Was helping to replace a head pulley guard, pulled groin, possible hernia. Accident happend on 6/25/09, reported on 7/2/09

Employee was checking fluid levels on truck #773 (100 ton truck). When he finished he started down the ladder on the truck and pulled a muscle in his back.

Screening plant was down because of screen over flowing and all truck drivers, scraper operators and plant operators were trying to shovel off excess, when a rock fell from the top of the screen to the bottom, where EE was.

Employee was picking up a M length of pipe and felt a sharp pain in his back and was unable to stand up.

EMPLOYEE WAS CARRYING A FIVE GALLON BUCKET OF GREASE & FELT A PAIN IN HIS LOWER BACK WHICH GOT WORSE OVER THE WEEKEND.

EMPLOYEE WAS SHOVELING ROCK & THROWING IT OVER HIS LEFT SHOULDER. HE STRAINED A MUSCLE IN HIS UPPER BACK.

Employee was lifting a welding machine out of the crusher and felt a pain in his lower back.

EMPLOYEE WAS REPLACING AN OXYGEN CYLINDER ON A DOLLY AND PINCHED A FINGER BETWEEN THE BOTTLE AND THE DOLLY.

EMPLOYEE WAS REPLACING A GRILL ON A TRUCK. IT SLIPPED AND FELL CUTTING HIS FINGERS.

EE WAS REMOVING A TEMPERATURE GUAGE SENDING UNIT ON AN ENGINE AND HOT COOLANT SPRAYED OUT.

EE WAS TURNING THE CRUSHER IMPELLER WITH HIS FEET AND STRAINED HIS BACK.

EE WAS THROWING A LARGE ROCK OUT OF THE CRUSHER IT BOUNCED BACK AND MASHED HIS FINGER.

EE WAS HITCHING A LIGHT PLANT TO A PICKUP AND SPRAINED HIS BACK LIFTING ON THE HITCH.

EE WAS REPAIRING A CHUTE IN THE PLANT AND STRAINED A MUSCLE IN HIS LEG.

EMPLOYEE WAS PULLING ON A LOCOMOTIVE BRAKE HANDLE AND FELT PAIN IN HIS LOWER BACK THAT CONTINUED TO WORSEN.

EE WAS GETTING UNDER A FRONT END LOADER TO DO MAINTENANCE WORK AND HURT HIS BACK.

A CUSTOMER DRIVER REACHED INTO THE TICKET CHUTE AT THE TRUCK SCALE AND AT THE SAME TIME TOOK HISFOOT OFF THE BRAKE PEDAL. THE TRUCK ROLLED FORWARD AND HIS RING ON HIS LEFT HAND GOT CAUGHT ON A FLAP AT THE END OF THE CHUTE. THE RING WAS FLATTENED DOWN AND CUT HIS FINGER.

THE EMPLOYEE WAS INSTALLING A PIN CUP ON A FRONTEND LOADER BUCKET. THE CUP FELL AND PINCHED HIS FINGERS BETWEEN THE CUP AND THE SHOP FLOOR.

EE WAS CLIMBING DOWN A TRUCK LADDER WHEN A RING HE WAS WEARING CAUGHT ON A STEP AS HE STEPPED OFTHE LADDER.

EMPLOYEE WAS LIFTING A SCREEN AND FELT A PAIN INHIS GROIN.

EMPLOYEE WAS SHOVELING MATERIAL INTO A DRILL HOLE AND FELT A PAIN. REPORTED INJURY 6/9/00.

EE WAS LIFTING A WELDER AND FELT A PAIN IN HIS BACK.

EMPLOYEE WAS REMOVING A TRANSMISSION FILTER. HE DROPPED THE FILTER AND CAUGHT IT, CUTTING HIS FINGER ON THE SHARP EDGE OF THE FILTER.

EMPLOYEE OPENED A CRATE USING A LARGE SCREWDRIVER. HE LAID THE SCREWDRIVER ON THE FLOOR AND ROLLED A HYDRAULIC HAMMER OUT OF THE CRATE. THE HAMMER LANDED ON THE SCREWDRIVER AND THE SCREWDRIVER FLIPPED UP AND HIT HIM IN THE FACE.

EE PICKED UPA PIECE OF PLYWOOD THAT HAD A NAIL STICKING OUT AND IT PUNCTURED HIS HAND.

EMPLOYEE WAS OPENING A LARGE SLIDING DOOR AND PINCHED HIS FINGER BETWEEN THE DOOR LATCH AND THE DOOR FRAME.

EE WAS LIFTING A CONVEYOR BELT IDLER AND IT TURNED OVER TWISTEDIN HIS ARM.

EE OPENED THE AIR VALVE ON THE BRAKES ON A RAILCAR AND THE HOSE HIT HIS CHIN.

EE WAS STACKING USED WEAR PLATES & PINCHED HIS FINGER BETWEEN TWO PLATES.

EE DOES MAINTENANCE WORK INCLUDING HEAVY LIFTING--HE NOTICED A LUMP WHICH THE DR. DIAGNOSED AS A HERNIA.