Buscar en el registro

Guard fell off cut right forearm required 8 staples

Employee was putting a ladder in the bed of the truck, when one end of the ladder hit the toolbox causing EE's thumb to get caught between the tailgate and ladder. This caused a laceration that required 4 stitches.

Employee was cleaning a rock build-up from a drop box cavity when a rock fell on employee's hand injuring it

Employee was putting materials (motor Sheaves) on a wooden pallet when material rolled on to right ring finger mashing and cutting it.

Shoulder dislocation caused by harness.

Employee was attempting to climb up ladder to haul truck at start of shift.

Employee lifted by hand a large rock.

Employee was lifting hammer lift assembly without help. Equipment too heavy for one person. Employee stated was angry with co-worker so didn't follow procedure. The hammer assembly slipped hit right big toe. Employee has language barrier. EE didn't inform us of the accident until investigation was launched on 8-13-19.

Employee got finger caught between screen and guard.

Replacing wishbone on rear side of 772 truck pulled something in back

Employee was changing side liner in the impact crusher the plate slipped hitting the ring finger on the right hand causing a small laceration.

Employee was making sure Drill Press drill bit was securely tightened. Right hand slipped causing contact with the drill bit and employee cut finger on right hand needing 3 stitches.

Repairing the rock box wall under the impact crusher aprons. They were using a skid steer to lift the steel plate to the conveyor under the crusher, below the wall. This is a confined area and caused them to be bent over slightly. The size of the plate and the confined area caused them to shift the plate to one side, with claimant taking the extra weight causing the injury.

Working out of a man lift basket. Harness protection was used. Removing old idlers with new ones. Body in awkward position to do so. Felt pain in shoulder then down right arm.

Employee was removing rock from a conveyor. A large rock fell from the conveyor to the ground then ricocheted off another on the ground and hit employee's left leg.

Employee was driving retaining pin form hydraulic hammer. A piece of rock was holding retaining in place broke off and impacted right eye.

Employee was engaged in loading barge when dropped a rope into river. He became very angry with himself, hit building with hand which resulted in broken bone in hand.

Employee was holding carriage bolt up so that a nut could be removed with an impact wrench. As the nut was being removed the bolt dropped down and was spinning. The head of the bolt was worn down and had a sharp edge. The spinning bolt cut through the employee's glove causing a laceration to his left index finger requiring 16 stitches.

Employee carrying screen weighing between 40-50 lbs up flight of stairs

Employee exited haul truck to remove rock from haul road. Employee picked up rock (approximately 15lbs) and carried it to the side of the road. As the employee was tossing the rock he heard and felt his right knee pop.

Employee opened engine access door during inspection and pulled lower back.

Repairing/lifting april liner on impact crusher.

Lifting of a welder into welding truck causing a lower back strain.

Employee's finger was caught in fan belt and severed 1/3 of right index finger

EE STRAINED HIS SHOULDER WHILE LIFTING/MOVING A HYDRAULIC PUMP AT THE WEDAG CRUSHER OF THE SECONDARY CRUSHING PLANT.

EE WAS CLIMBING BACK IN LOADER, WHEN HIS SHOULDER POPPED.

LIFTING MACK ENGINE WITH CHAIN HOOKED TO 988-B LOADER. LOADER OPERATOR SET ENGINE ON GROUND. EE UNHOOKED CHAIN & TRIED TO BALANCE WITH HIS LEG & COULDN'T HOLD IT UP. ENGINE ROLLED OVER PINNING HIM UNDERNEATH IT. RESULTING IN INJURY TO LEFT LEG AND LEFT SHOULDER.

RAIL WAS OFF SCRREN AND EE GOT OFF LOADER TO REPLACE RAIL. EE LIFTED RAIL AND STRAINED BACK.

LOADING EXCAVATOR AND BUCKET ON LOWBOY. WHEN PULLING TO TIGHTEN THE BINDER AROUND BUCKET, FELT A SHARP PAIN IN RIGHT GROIN.

SHOVELING MATERIAL FROM UNDER TAIL PULLEY. EE TOLD SUPERVISOR THIS WAS AN OLD INJURY WHICH REOCCURED FROM TIME TO TIME.

HE WAS CHANGING A DRILL BIT, IN DOING SO HE WAS LIFTING UP ON A TWELVE FOOT PIECE OF DRILL STEEL AND HE FELT A SHARP PAIN IN THE LOWER PART OF HIS BACK GOING DOWN INTO HIS RIGHT LEG.

WHILE WORKING UNDER AN ENGINE A MANIFOLD CAME LOOSE, FELL DOWN STRIKING EE HAND, CUT OFF TIP OF LEFT INDEX FINGER AND BRUISED HIS HAND.

HE WAS GREASING THE PLANT. WENT TO CHECK THE SCALPING SCREEN. HIS HARD HAT FELL OFF. HE RAISED UP AND HIT THE TIP OF HIS HEAD ON A STRIP OF ANGLE IRON.

HE WAS CLEANING THE ROCK BINS, HE WENT TO SHUT THE DOOR IT BOUNCED OVER AND CAUGHT HIS RIGHT THUMB BETWEEN THE DOOR AND THE IRON POST ON THE BIN, FRACTURING IT.

HE WAS UNLOADING STEEL FFOM THE BUCKET OF THE BACK HOE A PIECE OF THE STEEL SLIPPED, HE WENT TO CATCH IT AND THE STEEL CAUGHT HIS HAND BETWEEN IT AND THE GROUND, BREAKING IT.

EMPLOYEE WAS WORKING ON BOOKSHELF FOR OFFICE BOOKSHELF NEEDED TO BE TURNED OVER AS EMPLOYEE WAS DOING THIS A REAL SHARP AIN STRUCK IN TOP PART OF BACK CAUSING EMPLOYEE TO FALL TO THE FLOOR

HE WAS FILLING THE 175C LOADER WITH OIL. WHEN HE PARKED THE LOADER BESIDE THE OIL TANK HE STEPPED DOWN ONTO A THREE FOOT RETAINER WALL AND AS HE STEPPED DOWN FROM THE WALL WITH HIS RIGHT FOOT FIRST HIS LEFT KNEE STRUCK THE TOP OF THE WALL.

THE EMPLOYEE WAS WORKING ON BELT SNUBBER SNUBBER FELL TO GROUND 2 EMPLOYEES ATTEMPTED TO LIFT SNUBBER.ONE EMPLOYEE SUFFERED LOWER BACK PAINS AND RECTAL BLEEDING.EMPLOYEE NOTIFIED 11-06-91.

EE WAS INSTALLING VALVE CORE IN VALVE WHECHAIN SLIPPED OFF TIRE TREAD CAUSING TIRE TO FOLLOW EE.

HE WAS ASSISTING IN POURING A WING WALL BESIDE A JAW CRUSHER,AS THE CONCRETE WAS BEING POURED INTO THE CONCRETE FORMS IT SPATTERED INTO HIS LEFT EYE.

EMPLOYEE WAS LOADING SCREEN CLOTH R'X6'X2" OPENING SCREEN TWISTED ON EMPLOYEE THEREFORE PULLING ARM MUSCLE. EMPLOYEE DIDN'T GOT TO DOCTOR UNTIL 7-12-91.

CONDITIONS AT QUARRY WAS 17 FT AIR LINE FROZEN ON 1978 MACK DUMP TRUCK EE FOUND BRAKES FROZEN SO HE DRAINED AIR TANKS THIS TRUCK HAS ON AIR DRYER ON IT AND HE WAS GOING TO PUT IN DRYER AIR LIN E CAME OFF AND ICE FLEW INTO EE FACE MAINLY RIGHT EYE.

EMPL WAS WORKING ON CRANE HAD TO CRANK PONY ENGINE TO START CRANE MOTOR WHILE CRANKING PONY ENGINE STRAIN LOWER PART OF BACK.

DRILLING WITH A3R TRACK;WENT OFF THE HILL TO SERSET & 10' SECTION OF AIR TRACK.STEEL,LOADED THE STEEL WENT BACK TO THE AIR TRACK STEEL,LOADED THE STEEL WENT BACK TO THE AIR RRACK WHILE UNLOADI DED THE STEEL O0F THE PICK-UP ONE SCLE OF THE STEEL SLIP EMPLOYEE CAUGHT HOLD OF THE STEEL WENT TO HIS KNEE.

THE EMPLOYEE WAS WELDING ON FEEDER BOX FOR CRUSHER AND LIFTING SOME METAL AND STRAINED MUSCLE UNDER LEFT SHOULDER

EMPLOYEE WAS TR2ING TO SECURE TWO TIRES AT A DUMPING POINT ABOVE A SCREEN AND HE WAS STRAINING TO PUT TIRES AT CORRECT ANGLE AND STRAINED HIS RIGHT ARM RESULTING IN AN INJURY TO HIS MUSCLE AND JOINT. 3

TAKE UP ROLLER FELL ON EMPLOYEES ARM BADLY BRUISING IT

CHANGING FLAT TIRE ON POWDER TRUCK COMP. #725 TAKING SPARE TIRE OFF COMP TRUCK TIRE SLIP AND HIT RIGHT KNEE CAP.

BEND OVER TO PICK UP TOOLS AND BOLTS, STRAIN LOWER PART OF BACK.

CLEANING ROCK & MUD OUT OF PUG MILL. PIECE OF ROCK FLEW OUT AND STUCK IN LEFT EYE & CUT LEFT EYEBALL.