Buscar en el registro

EMPLOYEE WAS ATTEMPTING TO HOOK UP PORTABLE WELDER TO WELDING TRUCK AND THE LATCH DID NOT SET. ANOTHER EMPLOYEE PUSHED THE BACK OF THE WELDER DOWN AND THE TORGUE CAME UP HAD PUSHED THE HAND A GAINST THE BOTTOM OF THE TRUCK.

EMPLOYEE AHD COMPLETED FUELING HIS TRUCK AND BENT OVER TO REMOVE THE WHEEL CHOCKS AND EXPERIENCED SEVERE PAIN IN THE BACK.

EMPLOYEE WAS POSITIONING A GUARD ON THE TAIL PULLEY OF NO. 6 CONVEYOR WHEN THE GUARD SLIPPED STRIKING THE EMPLOYEE'S RIGHT THUMB CAUSING THE LOSS OF THE NAIL AND A FRACTURE OF THE DISTAL END O F JOINT. STITCHES WERE REQUIRED TO CLOSE THE WOUND.

EE WAS ASSISTING FOREMAN TO LIFT A FOLDING TABLE WHEN HE FELT A PULL IN HIS RIGHT SHOULDER. HE CONTINUED TO WORK, A REPORT WAS FILED. ON 9-18-98 EE INFORMED SAFETY ENGINEER HE HAD TO HAVE SURG ERY. EE WAS OPERATING ON 10-19-98 FOR ROTATOR CUFF REPAIR. HE WORKED HIS REGULAR JOB UNTIL THAT TIME.

MIDDLE FINGER OF LEFT HAND STRUCK BY ROCK WHEN HAND CLEARING A JAMMED CONE CRUSHER.

A 20 LB BOLT THAT WAS BEING CLEANED, ROLLED OFF A TABLE, STRIKING EMPLOYEE ON FOOT ABOVE THE STEEL TOE PORTION OF HIS SAFEY SHOE.

EMPLOYEE WAS HANDLING SCREEN AND DEVELOPED A HERNIA.

REMOVING FILTER ON 988B AND STRAINED BACK.

ENGINE PAN HIT ON FRONT END LOADER. INJURED ATTEMPTED TO LOSOEN CAP AND HOT WATER BLEW OUT AND BURNED HIM.

EE GOT FINGER CAUGHT BETWEEN STONE AND CRUSHER PLATE WHILE MANUALLY CLEARING A JAM.

EMPLOYEE FELT BACK PAIN/STRAIN AS HE PULLED HIMSELF UP ITNO A HAULAGE TRUCK VIA THE LADDER AND HANDHOLDS.

EMPLOYEE WAS REMOVING A BEARING FROM A SHAFT AND PULLEY ASSEMBLY. THE BEARDING FELL AND MASHED THE EMPLOYEE'S FINGER TIP.

WHILE HELPING TO ADJUST A CRUSHER HE GOT HIS RIGHT INDEX FINGER CAUGHT BETWEEN THE HANDLE A WEDGE OF THE CRUSHER CAUSING HIS FINGER TO BE CUT MASHED REQUIRING SEVEN STITCHES.

HELPING MOVE? METAL PLATE AND PULLED LOWER BACK MUSCLE.STARTED MISSING TIME 1-16-91.

EE WAS HELPING REMOVE A ROCK FROM THE JAW CRUSHER WHEN THE BLOCK OF THE CHAIN FALL STRUCK HIM IN THE BACK OF THE HEAD BELOW HIS HARD HAT. THE HEAD A SMALL CUT THAT TOOK 4 STITCHES.

BENT OVER TO PICK UP DROP CORD AND HURT HIS BACK

I.NAME WAS HELPING CHANGE A PULLEY ON A CONVEYOR. AFTER RMOVING THE PULLEY THEY DECIDED T LET IT DROP TO THE GROUND. WHEN THEY LET GO IT HUNG THE HAND RAIL FRACTURING A METACARPAL.

I,NAME WAS HELPING TO LOAD OLD SCREEN CLOTH INTO THE BACK OF A PICKUP TO HAUL TO THE STEEL PILE. I,NAME STARTED COMLAINING OF A PAIN IN HIS HERNIA.

WHILE HELPING INSTALL NEW CONVEYOR AT PLANT EMPL CLIMBED DOWN STRUCTURE & HURT BACK.

THE INJURED AND TWO OTHER EMPLOYEES WERE MOVING A PICE OF STEEL AFTER MOVING THE STEEL THE INJURED STATED THAT HIS BACK HURT.HE MISSED WORK ON 05-03-89 AND WENT TO THE DOCTOR ON 05-04-89.

WHILE REPLACING THE LAGGING ON A HEAD PULLEY. HE TURNED THE HEAD PULLEY TO ANOTHER POSTION USING A V-BELT IN DOING THIS HE CAUGHT HIS LITTLE FINGER BETWEEN THE V-BELT AND SHIEVE. THE BELT WA S TURNED OFF AND LOCKED OUT AT THE TIME.

INJURED WS WORKING UNDER JAW CRUSHER IN A TIGHT AREA LIFTING UP ON A TENSION ROD OAND SPRING PUTTING IN PLACE TO BE TRIGHTENED DOWN. AS HE IFTED ON THE ROD HE HURT HIS LOWER BACK. THIS WAS 12 -28-88 HE WAS OFF ON VACATION UNTIL 1-4-88 WHEN HE REPEEATED THAT HE NEEDED MEDICAL ATTENTION, UPON GOING TO THE DOCTOR HE WAS GIVEN 3 DAYS OFF AND WENT LIGHT DUTY.

WHILE WORKING IN LOGWASHER IT WAS NECESSARY TO TURN TUBE USING V BELT DRIVE WHILE PULLING ON V BELTS EMPL STRAINED HIS BACK.

EMPL REPLACING 4EATHER SRIPPING ON DOOR OF FRONT END LOADER.AS HE COMPLETED JOB SLAMMED DOOR ON HIS FINGER.CUT MIDDLE FINGER AND LEFT HAND.EMPL TAKEN TO EMERG CENTER AND HAD 8 STITCHES.

WHITE JUMPING O0F THE BUMPER OF A EUCLID HIS RING HUNG ON THE FENDER AND CUT HIS HAND.

REPLACING V BEL7S AND CAUGHT FINGER IN BETWEEN BEHIND WHEEL AND V BELT.

WHILE WORKING 2N FEEDER ROCK SLID OFF OF SURGE PILE AND STRUCK HIM ON HIP