Buscar en el registro

On March 27th 2013 a miner with 4 years experience was helping a co-worker change a ton bag for the red system, when his hand contacted a raised weld on the side of the pipe, cutting it.

strained groin climbing ladder into haul truck.

lifting 3" angle iron 10 ft long, the employee received injuries resulting in a hernia.

The employee received a cut on his left index finger, while checking to see if a mechanism was loose on the hammer line.

A foreign object ricocheted off clothing, under safety glasses, into eye.

The employee moved a trailer to line it up with the ball joint on the back of a truck, he sprained his elbow in the process.

Picking up bag from his right side to the left and twisted his left ankle.

A steel pipe rolled over onto the left ring finger of the employee, and pinched it.

Moving a storage box, lifted and set box down.

The employee grabbed a set of steps and pulled them toward himself and felt pain in his back.

a particle of dust went into the employees eye

The employee was climbing onto a forklift when he sprained his knee pulling himself up.

Employee was climbing up # 52 elevator on cooling side of silos with an MSHA inspector. when he got to the top he felt his left butt cheek start to hurt. Turned out to be a pulled muscle.

The subject was changing a brake chamber when a spring struck him on the lip.

The subject was helping a co-worker change a bearing on an elevator, he bent over to help lift a reducer and he pulled a muscle in his back.

The operator injured his back while shoveling loose material out from under a belt.

The employee was retrieving a clay shed density from a clay pile when some loose clay fell and knocked her down.

Employee was moving steel in shop when something cut his finger (Right Hand). He thought it might be a sliver of metal, but not sure .

Employee was pulling out oil heaters when some kind of liquid got under glove and burned back of right hand. We believe the liquid may have been a degreaser.

Employee was shoveling pile of material and pulled something in his left shoulder.

Employee was working with hole punch and had left thumb in the way and another employee slammed hole punch down on left thumb of employee.

Employee was pumping oil into Kiln tank. Employee was sprayed a little with the oil causing a chemical burn to his left forearm on the inside.

Employee was shoveling material and turned the wrong way causing his lower back the left side to strain and pull a muscle.

The employee was stacking 50 lb bags onto pallets, when he felt something pop in his left wrist area.

Employee was inspecting cylinder for air leak when the cylinder closed catching the employees right pinky finger in trap doors.

A conveyor was being moved as it was being moved. It the handle on an air valve to the on position.This caused the air line to whip around hitting the employee several times on his right shin causing cuts and bruises. The air valve in question is on kiln deck plant # 2

Employee was stacking 40# bags, when he caught one off the conveyor line, he spun around and felt pain in his left shoulder area.

Employee was getting on skytrack, when he pulled the left side of his lower back.

Employee was stacking 25# bags onto a pallet, when he said his lower back started to hurt. He then said it was starting to hurt worse so we put him on a stretcher and called 911.

Employee was removing empty pallet from stack to place in scissor lift. Top pallet was caught on another pallet and employee jerked pallet to get it loose. In doing that as the pallet became free his left hand was caught between both pallets.

Employee had hand over auger box and finger went through duct tape, employee thought it was metal cut his right index finger and had to have stitches.

Employee was trying to remove a piece of D.E. from the crusher, when a piece fell on his right hand.

EE was trying to clean out the tailgate on a dump truck, when the tail gate closed on his hand (right hand- middle finger).

Employee was lifting 50 lb bags and stacking them onto a pallet and strained his lower back.

Bent down to lift a pipe off ground with shoulder, as he started to stand up he hurt his lower back.

Employee was sweeping floor and got something in his left eye.

The adjustment torque arm on # 3 elevator is rusted up, while forcing the belts on it and pulling on the belts, left hand and forearm began to hurt.

Worker was handling bags, stacking them on pallets off the conveyor belt and caused a blister on 8/27/2007. The accident was not reported til 8/31/07 when employee's blister became swollen and discolored his finger. He went to ER on 8/31/07.

Employee was checking hot elevator at # 1 plant and a small piece of refractory covered with hot grease fell on his face, burning his nose and upper and lower lips.

EE was stacking bags on pallet, when he hurt his lower back Monday , did not ask to go to the doctor till Thursday 8-16-07.

Picked up chair to set on desk while cleaning control room and had a sharp pain under left shoulder blade. Causing swelling and muscle strain to left shoulder.

While flattening a 40 # bag on a pallet, the employee bruised his left thumb adn hand and his left thumb was swollen.

Employee was tearing open plastic bags that had holes in them ,when he said his wrist & hands (Left & Right) started to lock up .

Bent over to pick up a box of parts and felt a pull in his back.

Employee was replacing a conveyor belt and the rope that was holding the employee broke and caused the employee to fall. While pulling the belt together the employee pulled a muscle in his stomach

Miner was in compliance with rules and regulations; the equipment involved was the mill roll. Miner followed all safety precations. Miner needs to identify his pinch points and avoid them to prevent injury or accident.

Miner was in compliance with rules and regulations. The equipment involved was the mill roll and he was using personal protection equipment and other safety devices. Miner was well trained and was using and following precations to prevent.

LUMBAR SPRAIN, LEFT SIDE OF HIP, WHILE ROTATING 12" CHANNEL ON TABLE FOR CUTTING. EE BROKE NO ASPECT OF COMPLIANCE WITH RULES & REGS. THERE WAS NO EQUIPMENT INVOLVED IN INJURY, AND NO PROTECTIVE GEAR (PERSONAL OR OTHER) INVOLVED. EMPLOYEE FAILED TO USE PROPER LIFTING TECHNIQUES AND ASK FOR ASSISTANCE.

Two employees were putting a brake drum on a drive axle of a dump truck. One employee picked drum up, turned it around on a table so it would face axle hub. He picked it up and turned around, bent over to place drum on hub and let out a cry. He was put on a stretcher and sent to hospital. He suffered a herniated disc in his back.

Employee was stacking 50# bags on pallet. When he picked up bag to turn he heard a pop in his shoulder.