Buscar en el registro

Employee injured right thumb while installing springs on shaker screen.

The shift crew was changing sorting screens on a sorting bed. The injured employee was guiding the suspended screen to a storage stack. As ee pulled on the suspended screen groin was caught between the screen and the stack. EE received painful contusions to groin and missed two days of work. EE has returned to full duties.

The injured employee was part of a team replacing a sizing screen on a Symons screening machine. While moving the replacement screen into place the edge of the screen caught on a machine guard. The employee pulled on the guard to release the screen and left hand was pinched between the screen frame and the guard. Employee received a laceration that required stitches.

The injured person was installing a bucket on a wheel loader. He was removing shipping bracket from the dog bone link. When bolt attaching the bracket bracket was loosened, the dog bone link fell and hit EE's shoulder.

The injured person was assisting with repairs on the crushing plant. He was helping to remove and carry a bearing for a shaker. The injury was not noticed at the time. He reported a sore back when he reported for his work shift on 12/30/10.

The injured employee was cleaning next to a conveyor by shoveling material into a bucket and then dumping the bucket on to the belt. The belt was not running. As he dumped a bucketfull on to the belt he felt a pain in his knee. The following day, the employee visited a doctor and he was advised not to work for at least a week.

The injured employee was regularly cleaning vibratory screens in the crushing plant by pounding the screen cloth with a metal bar. He developed a blister on his right index finger. The blister got infected and needed medical treatment.

When lifting cases of drinking water the injured employee felt a minor irritation in his back. Initially he did not feel pain or discomfort. Pain in his lower back progressively got worse until on 10/4/08 when he went to see a doctor. He has had difficulty sitting or standing for any length of time.

The injured employee was liftng a wear part from a VSI crusher. When he went to set it down he caught his right pointer finger between the part and another wear part that he was setting the part down on. His finger needed stitches and removal of the fingernail.

The injured employee was putting away his tools when he felt a pain in his lower back. Prior to this he had been replacing a conveyor idler on the crushing plant. The following morning, he was in more pain and visited the doctor. The employee has a history of back problems.

The injured employee was moving rocks at a crushing plant. A rock rolled off where he was stacking them and impacted his right hand. Resulted in lacerations to his fingers, one of which required sutures.

The injured employee and another employee were vchanging wear parts on a vertical shaft impact rock crusher. After finishing this task he continued working as the plant operator. He experienced some discomfort a while later, but continued working. He developed back pains and was unable to work the following day.

The injured employee was repairing the fuel system on an excavator. A fitting broke causing fuel to spill. While trying to contain the leak, diesel fuel splashed in his eyes. He flushed his eyes, visited a physician and got prescription eye drops.

THE INJURED EMPLOYEE WAS ASSISTING WITH UNLOADING 50 LB. BAGS OF ANFO INTO A STORAGE MAGAZINE. THERE WAS NO SPECIFIC INCIDENT THAT CAUSED THIS INJURY. HE DEVELOPED A SORE LOWER BACK AFTER COMPLETION OF THE TASK. HE HAD A PRE-EXISTING BACK CONDITION BEFORE THIS INJURY.

WHILE TRYING TO INSTALL A GUARD ON A PIECE OF MOBILE EQUIPMENT, THE GUEARD SLIPPED AND CONTACTED HIS HAND.

EE WAS ATTEMPTING TO REMOVE A WHEEL CHOCK FROM THE TIRE OF A ROCK HAUL TRUCK. HE STRAINED HIS BACK WHILE BENDING OVER TO PULL THE CHOCK OUT. THE CHOCK WAS WEDGED BETWEEN THE TIRE AND THE GRO UND.

EMPLOYEE WAS USING A PIECE OF WOOD TO MAINTAIN ALIGNMENT ON CONVEYER BELT. WHILE ADJUSTING IT HE HIT HIS WRIST. THIS RESULTED IN A BRUISE TO HISWRIST.

EE WAS CLEANING UP LOOSE MATERIAL AROUND CRUSHER& SHOVELING MATERIAL INTO WHEELBARROW WHEN HE STRAINED HIS LOWER BACK.

WHILE RE-FUELING THE EQUIPMENT, DIESEL FUEL SPLASHED ON EE'S UPPER BODY, FACE, & ARMS. EE RINSED OFF, TREATED EYES WITH DROPS & SHOWERED.

DURING INSTALLATION OF 6" CHANNEL IRON STEEL MEMBERS, ONE SECTION SLIPPED OFF RESTRAINING CLAMP. WHEN IT FELL EE ATTEMPTED TO CATCH IT, CAUSING ONE END TO CONTACT HIM ON THE CHIN THIS CAUSED A LACERATION WHICH WAS TREATED AND REQUIRED STITCHES.

EE WAS HELPING TO LOAD A HYDRAULIC HAMMER BIT INTO A PICKUP TRUCK BED. THE EE'S LEFT RING FINGER GOT PINCHED BETWEEN THE HAMMER BIT AND THE FLOOR OF THE PICKUP, INJURING HIS FINGER.

EE WAS SHOVELING MATERIAL THAT HAD FALLEN OFF CONVEYOR FEEDING PORTABLE CRUSHER.

EE STRAINED LEFT WRIST WHILE SHOVELING MATERIAL THAT HAD FALLEN OUT CONVEYOR BELT FEEDING PORTABLE CRUSHER.

EE WAS REMOVING CONCRETE THAT HAD BEEN HO RAMMED THE DAY EARILER. ANOTHER EE WORKING WITH HIM DROPPED A LARGE PIECE ON CONCRETE ON HIS HAND.

EE WAS SHOVELING MATERIAL UNDER CONVEYOR BELT & STRAINED HIS LOWER BACK.

WHILE WORKING ON A WATER PUMP, EMPLOYEE PULLED ON THROTTLE LEVER WHICH BROKE, CAUSING HIM TO FALL BACKWARDS.

EE WAS CLIMING DOWN FROM A PLATFORM AND PLACED HIS HAND ON A DISCHARGE CHUTE WHEN A ROCK FELL OUT HIS FINGER.

EMPLOYEE WAS REMOVING ROCK FROM UNDER PRIMARY JAW WHEN LEFT INDEX FINGER GOT PINCHED BETWEEN TWO ROCKS.

WHILE MECHANIC WAS CHANGING BUCKET ON EXCAVATOR AND REMOVING THE PIN,IT FELL ONTO HIS FINGERS.

WHILE REPAIRING CANICA CRUSHER THE GBASKET FELL ONTO EMPLOYEES BACK

WHILE REMOVING STICKS FROM CONVEYOR EMPLOYEE TURNED HEAD STRIKING A PROTRUDING BEAM HE WAS WEARING A HARD HAT

EMPLOYEE TWISTED BACK WHILE REMOVING A STICK FROM A CONVEYOR.

EMPLOYEE GOT DUST IN HER EYES WHEN CONTRACTORS WERE REPAIRING CEILING IN OFFICE.

ELECTRIC PANEL BOX COVER FELL AND HIT EE S HEAD.

WHILE CHANGING LIGHT BULB, EMPLOYEE CUT FINGERS WHEN LIGHT BULB BROKE.

EMPL CUT FINGER REMOVING CHAIN FROM A LOAD OF STEEL.

EMPL HELPING TO PUT HAMMER ON EXCAVATOR WHEN PIN PINCHED FINGER.

EMPL REMOVING P3ECE OF PLYWOOD FROM HOPPER.

EMPL SHOVELING 9OCK AND FELT SHARP PAIN IN LOWER BACK.

CAMACHO WAS HELPING REPAIR PRIMARY CRUSHER MAIN SHAFT BEARING. IN ATTEMPTING TO CROSSOVER FROM THE FLYWHEEL SIDE OF THE CRUSHER TO THE CRUSHER PLATFORM, HE GRABBED A 2 X 4 LUMBER, ONE END OF W HICH WAS RESTING ON A METAL HOLDER WHILE THE OTHER WAS RESTING ON A 2 X 4 FRAME. THE 2 X 4 FELL OFF THE FRAME WHEN HE GRABBED IT WITH HIS RIGHT HAND AND IT WAS PINCHED IN THE METAL HOLDER.

EMP WAS WASHING FILTERS WITH SOLVENT HE LATER FELT BURNING SENSATION ON BOTH HANDS

PASSING COME-ALONG TACKLE TO ANOTHER EMPL ADN STRAINED MUSCLE IN RIGHT SHOULDER.