Buscar en el registro

Employee was walking on crushed material and twisted ankle

Employee was doing housekeeping duties as assigned and was cutting down a small tree when they lost footing and slipped and fell into railing and hit their ribs on right side.

Employee was working on primary crusher and twisted knee. Incident was reported on 04/14/2022. Employee was mobilized and given crutches and one day off of work.

Employee injured right thumb while installing springs on shaker screen.

The shift crew was changing sorting screens on a sorting bed. The injured employee was guiding the suspended screen to a storage stack. As ee pulled on the suspended screen groin was caught between the screen and the stack. EE received painful contusions to groin and missed two days of work. EE has returned to full duties.

The injured employee was part of a team replacing a sizing screen on a Symons screening machine. While moving the replacement screen into place the edge of the screen caught on a machine guard. The employee pulled on the guard to release the screen and left hand was pinched between the screen frame and the guard. Employee received a laceration that required stitches.

The injured person was installing a bucket on a wheel loader. He was removing shipping bracket from the dog bone link. When bolt attaching the bracket bracket was loosened, the dog bone link fell and hit EE's shoulder.

The injured person was assisting with repairs on the crushing plant. He was helping to remove and carry a bearing for a shaker. The injury was not noticed at the time. He reported a sore back when he reported for his work shift on 12/30/10.

The injured employee was cleaning next to a conveyor by shoveling material into a bucket and then dumping the bucket on to the belt. The belt was not running. As he dumped a bucketfull on to the belt he felt a pain in his knee. The following day, the employee visited a doctor and he was advised not to work for at least a week.

The injured employee was regularly cleaning vibratory screens in the crushing plant by pounding the screen cloth with a metal bar. He developed a blister on his right index finger. The blister got infected and needed medical treatment.

When lifting cases of drinking water the injured employee felt a minor irritation in his back. Initially he did not feel pain or discomfort. Pain in his lower back progressively got worse until on 10/4/08 when he went to see a doctor. He has had difficulty sitting or standing for any length of time.

The injured employee was liftng a wear part from a VSI crusher. When he went to set it down he caught his right pointer finger between the part and another wear part that he was setting the part down on. His finger needed stitches and removal of the fingernail.

While assisting repairs on crusher equipment, worker sustained injury to cheekbone below eye.

The injured employee was putting away his tools when he felt a pain in his lower back. Prior to this he had been replacing a conveyor idler on the crushing plant. The following morning, he was in more pain and visited the doctor. The employee has a history of back problems.

The injured employee was moving rocks at a crushing plant. A rock rolled off where he was stacking them and impacted his right hand. Resulted in lacerations to his fingers, one of which required sutures.

While picking up an anvil employee stepped in hole in the platform, slipped and the anvil cut his nose.

While setting a crusher liner in the jaw crusher, the laborer got in the crusher. The liner slipped, wedging his foot between the liner and a 2x4. He spained his ankle severly.

While cleaning in the crusher area, worker strained his back while reaching with a hoe.

Steped off crusher and landed on rock that was on the walk way.

WHILE TRYING TO REMOVE A WEDGED ROCK IN CRUSHING JAW, THE PRY BAR BECAME STUCK AND THEN SHOT OUT AND HIT HIM IN THE HEAD ABOVE THE RIGHT EYE.

The injured employee and another employee were vchanging wear parts on a vertical shaft impact rock crusher. After finishing this task he continued working as the plant operator. He experienced some discomfort a while later, but continued working. He developed back pains and was unable to work the following day.

The injured employee was repairing the fuel system on an excavator. A fitting broke causing fuel to spill. While trying to contain the leak, diesel fuel splashed in his eyes. He flushed his eyes, visited a physician and got prescription eye drops.

THE INJURED EMPLOYEE WAS ASSISTING WITH UNLOADING 50 LB. BAGS OF ANFO INTO A STORAGE MAGAZINE. THERE WAS NO SPECIFIC INCIDENT THAT CAUSED THIS INJURY. HE DEVELOPED A SORE LOWER BACK AFTER COMPLETION OF THE TASK. HE HAD A PRE-EXISTING BACK CONDITION BEFORE THIS INJURY.

EE WAS WORKING AS A MECHANIC ASSISTANT AROUND WELDING ACTIVITIES, DURING HIS WORK SHIFT ON 5/10/04. LATER THAT NIGHT HE SUFFERED FROM IRRITATED EYES, PRESUMABLY CAUSED BY WELDING FLASHES.

WHILE TRYING TO INSTALL A GUARD ON A PIECE OF MOBILE EQUIPMENT, THE GUEARD SLIPPED AND CONTACTED HIS HAND.

SWINGING 10 LB. SLEDGE HAMMER TO POUND LIFT CYL. PIN, EE STRAINED A MUSCLE ON HIS NECK/SHOULDER.

While removing a track pin from an excavator, ee was hitting the pin with a sledge hammer. a metal chip flew off and cut ee s leg.

EE WAS ATTEMPTING TO REMOVE A WHEEL CHOCK FROM THE TIRE OF A ROCK HAUL TRUCK. HE STRAINED HIS BACK WHILE BENDING OVER TO PULL THE CHOCK OUT. THE CHOCK WAS WEDGED BETWEEN THE TIRE AND THE GRO UND.

EE WAS STRIPPING AND OFF QUARRY BENEGY WITH EXCAVATOR WHEN MUD FLEW INTO CAB, HITTING HIM DIRECTLY INTO EE S EYE AS HE ATTEMPTED TO EMPTY EXCAVATOR BUCKET.

EMPLOYEE WAS USING A PIECE OF WOOD TO MAINTAIN ALIGNMENT ON CONVEYER BELT. WHILE ADJUSTING IT HE HIT HIS WRIST. THIS RESULTED IN A BRUISE TO HISWRIST.

WHEN DISMOUNTING FROM LOADER AT THE END OF HIS SHIFT, THE LOWER STEP ON THE LOADER BROKE, CAUSING EE TO TWIST HIS KNEE. THE INJURY LATER BECAME AGRAVATED DIAGNOSED AS A TORN LIGAMENT IN THE LE FT KNEE.

WHILE TRYING TO CLIMB ON VSI CRUSHER TO CLEAN MUDDY BUILDUP, OPERATOR'S HAND SLIPPED WHILE PULLING HIMSELF UP & CAUSED HIM TO SLIP BACKWARDS & STRAIN LEFT HIP MUSCLE & SCRAPE RIGHT KNEE.

EE WAS CLEANING UP LOOSE MATERIAL AROUND CRUSHER& SHOVELING MATERIAL INTO WHEELBARROW WHEN HE STRAINED HIS LOWER BACK.

WHILE RE-FUELING THE EQUIPMENT, DIESEL FUEL SPLASHED ON EE'S UPPER BODY, FACE, & ARMS. EE RINSED OFF, TREATED EYES WITH DROPS & SHOWERED.

DURING INSTALLATION OF 6" CHANNEL IRON STEEL MEMBERS, ONE SECTION SLIPPED OFF RESTRAINING CLAMP. WHEN IT FELL EE ATTEMPTED TO CATCH IT, CAUSING ONE END TO CONTACT HIM ON THE CHIN THIS CAUSED A LACERATION WHICH WAS TREATED AND REQUIRED STITCHES.

EE WAS HELPING TO LOAD A HYDRAULIC HAMMER BIT INTO A PICKUP TRUCK BED. THE EE'S LEFT RING FINGER GOT PINCHED BETWEEN THE HAMMER BIT AND THE FLOOR OF THE PICKUP, INJURING HIS FINGER.

EE STEPPED INTOFLOOR OPENING AND RECEIVED A LACERATION ON HIS LEFT LEG.

EE WAS SHOVELING MATERIAL THAT HAD FALLEN OFF CONVEYOR FEEDING PORTABLE CRUSHER.

EE STRAINED LEFT WRIST WHILE SHOVELING MATERIAL THAT HAD FALLEN OUT CONVEYOR BELT FEEDING PORTABLE CRUSHER.

EE WAS REMOVING CONCRETE THAT HAD BEEN HO RAMMED THE DAY EARILER. ANOTHER EE WORKING WITH HIM DROPPED A LARGE PIECE ON CONCRETE ON HIS HAND.

WHILE STEPPING DOWN FROM DRILL, EE STRAINED GROIN.

EE WAS SHOVELING MATERIAL UNDER CONVEYOR BELT & STRAINED HIS LOWER BACK.

EMPLOYEE WAS DECENDING FROM 980 LOADER WHEN BOTTOM RUNG GAVE WAY. EMPLOYEE FELL ON LEFT LEG AND INJURED LEFT KNEE.

WHILE WORKING ON A WATER PUMP, EMPLOYEE PULLED ON THROTTLE LEVER WHICH BROKE, CAUSING HIM TO FALL BACKWARDS.

EMPLOYEE WAS CHECKING BATTERY BOX WHEN GENERATORWOULD NOT START AND INHALED FUMES.

EE WAS CLIMING DOWN FROM A PLATFORM AND PLACED HIS HAND ON A DISCHARGE CHUTE WHEN A ROCK FELL OUT HIS FINGER.

EMPLOYEE WAS REMOVING ROCK FROM UNDER PRIMARY JAW WHEN LEFT INDEX FINGER GOT PINCHED BETWEEN TWO ROCKS.

EE WAS CLIMBING ONTO A LOADER SLIPPED ON FIRST STEP AND FELL TO GROUND.

WHILE MECHANIC WAS CHANGING BUCKET ON EXCAVATOR AND REMOVING THE PIN,IT FELL ONTO HIS FINGERS.

EE BURNED RIGHT WRIST WITH CUTTING TORCH.