Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
Employee was uncoupling line inside storage room and a piece of metal on the pipe clamp cut their pinky finger while they were lifting the line. Employee was taken to the emergency room and given five(5) stitches.
Employee was removing old rails from the inside ring that belongs to the mill crusher. When needing to reach the top rails the employee rolled the ring and as it took off it caught their hand between the ring and a tote that was close by.
Mechanic was lifting a packout kit of tools and pulled something in EE's shoulder
Miners were removing tank inspection door which is steel plate 28"X40". Top nuts were loosened and left on. The remaining nuts were removed. Miners hit door to relieve pressure. Once removing top nuts the door was still hung on studs. They tugged on door. Material shifted causing door to push employee back against the belt guard causing them to turn, twisting the right ankle.
The miner was standing on a ladder and pushing up on a roof hatch door on the new shaft cage in the shop. The hatch door weighs approximately 40-50 lbs. The miner felt the ladder move and EE's hand slipped on the door EE was holding open causing it to come down on EE's left pinky finger tip.
Miner got brake cleaner spray in left eye, treated by a doctor and prescription provided.
Worker was clearing muck away from collar pipe. EE grabbed a rock and when EE did another rock slide down and pinched EE's left thumb causing a laceration that required surgical glue.
While manually adding a 10 foot HQ drill rod to the drill string the miner felt a strain in EE's right forearm.
As the miner grabbed the whip-check to pull the jackleg drill down, a small piece of metal went through the glove into the right pointer finger. The next day the puncture wound was red and sore and appeared to be infected prompting the worker to seek medical attention.
Worker was performing a pre-operational inspection of LH410 at the time of the incident. The worker was checking the filters for the air conditioner which required the hood to be raised on the loader. The worker had EE's left hand on the frame of the housing when the hood came down and struck EE's left thumb.
Employee pinched middle finger on left hand while adjusting forks on a forklift resulting in a broken finger tip.
Employee was pulling wire from the back of a tractor. Employee rolled a foot on the railroad track, stumbled and caught themselves on the back of the tractor. Employee was taken to the Emergency Room and diagnosed with a broken tibia in the left leg. Employee had surgery to repair the break.
Driller was helping a mechanic lift a componant of his drill when he felt something give in his back. Resulted in a strained lower back.
Employee was transferring fuel into a transport tank when a small amount splashed into his face and eyes. Six days later he had strong irritation to his left eye and was seen by an eye Dr. who removed a small piece of imbedded steel.
Employee was moving a rock and set it down hard between another rock. Resulted in stitches along with breaking middle left end joint of finger.
Miner was attempting to position roof bolt through screen when the bolt fell from his grip striking the left side of his face below his eye. The blunt force caused a laceration requiring 3 stitches.
While attempting to connect a 2" airline with victaulic fittings the pipe slipped, striking the employee on the right hand. The blunt force impact broke the ring finger knuckle of his right hand.
While assisting a mechanic in the installation of a tire his finger gor pinched between the tire and fender resulting in removal of the finger nail and 6 stitches to the right index finger.
Electrical power was interrupted to the 3100 vent doors; the crew attempted to open them manually. After proping the doors open, they unexpectedly shut and employee's feet were struck.
Miner had left index finger and middle finger pinched between the back of the Jumbo electrical plug and the opening for the cable reel. This resulted in loss of the tip of his index finger and 3 stitches to his middle finger.
Mechanic moving an LHD, placed his hand on the operators compartment edge and turned the LHD, which pinched his hand.
The employee was removing discarded roof bolts and sreen from a waste rock dump in preparation to muck the waste rock for fill in a shop floor before concrete is poured. When he pulled a bolt free, a rock of unknown size rolled down the pile striking his right hand, causing a laceration to his middle finger.
The miner was servicing underground mine equipment with 5 gallon safety cans when he picked up a full can of diesel (approx 35#). He turned to load the can on the service tractor and felt a pop in his left wrist. He continued to work the rest of his shift, but had discomfort and swelling during the night so he was taken to the Dr. the next morning.
A small piece of rock became loose on face and fell. It struck employee on hard hat, causing hat to shift. The hat suspension caused a small laceration on scalp and the brim also hit employee on jaw.
Due to ventilation air, a piece of debris was forced into his eye.
Lifting a liner at the crusher, he felt something pop in his mid section, the next day while dismounting a vehcle he felt a bulge in his midsection.
While moving an old door out to replace with new, he pinched his hand between door and door casing.
Pinched finger between slide and machine.
The employee was attempting to remove the stem of an LHD hydraulic cylinder. It unexpectedly came out cutting his hand and bruising his chest.
Employee was cleaning lime tank #2. Despite being directed by co-workers to stay out of the tank, the injured employee entered the tank wearing work shoes of poor quality. The injured employee developed skin irritation to his feet and lower legs from the lime.
Employee was removing tool box from RTV when he felt pain in his back.
Employee was removing pipe off a lift truck when the pipe slid off the truck and struck him in the back of the neck
Employee was attempting to straighten the fingers on the bolter with a drill steel. The steel slipped off and struck him below the right eye. Employee sustained a fracture to the right cheek bone.
Climbed on lift truck, lifting up with left leg, he felt sharp pain and stiffness. Swollen at end of shift and during shift.
Injured was cutting boom pin, when cut was completed, another employee taped the pin out, hot grease came off pin striking injured on left side of nose. Injured wiped grease off his nose, at the same time the glove brushed his left eye causing scratch to eyeball (left).
Three employees rolled a rock about 300 pounds off a de-energized cable, stood rock on edge. Two of them moved the cable. One EE lost balance of rock; rock rolled towards him onto his left leg. He over-extended the left knee. At hospital xrays showed nothing broken; doctor gave him tylanol and light duty release for 5/6/06.
INJURED WAS REMOVING POWER PANEL FROM SIDEWALL WHEN A CHUNK OF LOOSE ROCK FELL BETWEEN THE SIDEWALL & HANGING SCREEN PANEL, STRIKING HIM ABOVE HIS RT. EYE.