Buscar en el registro

IE was helping the welder attempting to perform a weld-repair to a permanent-magnet frame. The framework of the magnets had slipped and clamped down on EE's finger mashing tip end of pinky finger on left hand.

Employee approached loader from front, he put hands on handles and right foot on step on upper edge of bucket. As he pulled with his arms to raise up into loader, he felt sharp pain in his lower back. Employee has back pain, requiring medication and physical therapy.

Employee was using a bar to open the bottom door on an incoming ore railroad car. When the door latch mechanism suddenly released, employee felt pain in his back and left arm. Doctor's diagnosis was lumbar strain and muscle strain.

EE was removing the bolt holding the torque-arm (speed reducer) to install a guard bracket. The weight of the 3 hp motor & motor mount caused the whole drive to rotate & the motor mount hit employee. When pulling back, he hit his head on the end of the conveyor frame. Cut on mouth requiring 16 stitches, broken tooth & 2 chipped teeth. Cut behind right ear requiring 3 stitches.

IE was closing car gate and closing bar slipped hurting left arm & shoulder. Did not go to doctor at this time, used various rubs & heat. Saw doctor on 9/6/2005, continued working with no loss time. MSHA reportable on 9/20/2005 when IE started physical therapy. Still no loss time.

EE WAS REMOVING BUSHING FROM TAILROLLER CRUSHER DISCHARGE BELT. SHAFT OF TAILROLLER FELL ONTO TILAROLLER BEARING HOUSING CAUSING INJURY TO RIGHT LONG FINGER, LEFT SMALL AND LONG FINGERS. DR DI D A NAILBED REPAIR AND REDUCED HIS FRACTURE. MISSED ONE DAY OF WORK AND ON LIGHT DUTY.

EMPLOYEE WAS TAKING VIBRATOR OFF RAILCAR AT CRUSHING SITE, WHEN IT SLIPPED OUT OF HIS HANDS, HITTING HIS RIGHT KNEE AND CAUSING CONTUSION. VIBRATOR WAS OILY FROM LUBRICATES.

INJURED EE WAS CHANGING THE LOADING HOSE PIPE FROM ONE SECTION OF A COVERED RAILCAR HOPPER TO THE NEXT SECTION. AS HE MOVED THE LOADING AND VENT HOSE THAT THE DOOR WAS SUPPORTED BY, THE DOOR D ROPPED AND CAUGHT HIS LITTLE FINGER BETWEEN THE DOOR AND THE BRACKET OF THE LOADING SWITCH, CAUSING CONTUSION AND SIMPLE FRACTURE.

INJURED EE PICKED UP JACKHAMMER (APPROX. 60-70 LBS.) FROM BACK OF VAN WHEN HE FELT PAIN TO HIS BACK RESULTING IN STRAIN TO UPPER BACK.

INJURED EE WAS CROSSING RAILCARS WHERE THEY WERE COUPLED STRIKING LEFT KNEE CAUSING INTERNAL DERANGEMENT. DID NOT MISS ANY TIME UNTIL 7-7-99 WHEN HE WENT FOR AN MRI. HAD SURGERY ON 7-13-99.

INJURED EE INJURED LEFT SHOULDER WHILE PUNCHING OUT SURGE BIN AT CRUSHER. DID NOT GO TO DR TILL 6-9-99, DID NOT MISS ANY WORK UNTIL SURGERY ON 9-2-99.

WHILE ERECTING A METAL BUILDING, INJ EE WAS PUSHING ON METAL POST WHEN THE PERLIN SUPPORT FELL FROM POST STRIKING TOP OF EE'S LEFT HAND CAUSINGLACERATION. REQUIRED STITCHES

INJURED EE WAS DOING MILL MAINTENANCE OF #2 MILL. WHILE LIFTING PLOWS, INJURED HIS LOWER BACK CAUSING BACK STRAIN.

INJURED EE WAS LIFTING BAG FROM BAGGING MACHINE WHEN LEFT ARM STARTED HURTING FROM ELBOW TO SHOULDER CAUSING A BICEP STRAIN. EE RETURNED TO WORK ON RESTRICTED DUTY TILL SEPT 8, 1998.

IE WAS REMOIVNG TRUCK LOADING PIPE FROM TRUCK AND PULLED SOMETHING IN HIS RIGHT SHOULDER. REPORTED TO PLANT MANAGER, WITHIN 5 MINUTES OF ACCIDENT.

EMPLOYEE WAS REMOVING COVERS FROM RAILCAR RECEIVING STRAIN CAUSING HEMMOROIDS.

I/E WAS WELDING ON PLOWS FOR RAYMOND MILL WHEN LIFTING PLOW HURT RIGHT SHOULDER. PLOW WEIGHS APPROX. 60 LBS. I/E DID NOT GO TO DR. UNTIL 4-3-97. IT WAS NOT REPORTABLE UNTIL THAT DATE. MAY HAVE TO HAVE SURGERY, DATE OF SURGERY UNKNOWN AT THIS TIME. HAS NOT MISSED ANY TIME FROM WORK AS OF THIS DATE.

EE WAS CLEANING REAR-MIRROR ON EUCLID DUMP TRUCK WHICH WAS CRACKED, CUTTING LEFT HAND

EE WAS CLEANING ORE THAT HAD BEEN DUMPED OUT OF RAILCAR, TURNED AND FELT SOMETHING POP OR SNAP IN LEFT KNEE.

WHEN GETTING OFF WA250 LOADER, EMPLOYEE TWISTED RIGHT KNEE.

PIECE OF ORE FELL FROM CATWALK ABOVE EMPLOYEE AND GOT IN RIGHT EYE.

EMPLOYEE WAS REMOVING RADIATOR CAP FROM A HOT FR-10 LOADER.

EMPLOYEE WAS CLEANIGNOTU DUST COLLECTOR PIPE WHEN IT SLIPPED BAKC MASHING FINGER BETWEEN ANOTHER PIECE OF PIPE. HE WENT TO THE EMERGENCY ROOM AT THAT TIME, THENWENT TO DR ON MONDAY 2-21-94.

EMPLOYEE WAS PLACING MOTOR BACK INTO GEAR DRIVE ON #1 MILL DUST COLLECTOR. A PIECE OF MATTER FLEW INTO RIGHT EYE EMPLOYEE WENT TO DOCTOR & WAS GIVEN MEDICATION FOR TREATMENT.

EMPLOYEE WAS CHANGING LOAD PIPE ON RAILROAD CAR BEING LOADED. LIFTED DOOR WITH HIS LEFT HAND AND STRAINED SOMETHING IN LEFT FOREARM.

EMPLOYEE WAS WALKING IN YARD WHEN HE TURNED IS RIGHT ANKLE.EMPLOYEE WAS IN #2 MILL ROOM WHEN HE DROPPED A PIPEWRENCH ON HIS RIGHT FOOT.

REMOVING PLATE FROM CRUSHER IT SLIPPED AND STRU CK L FOREFINGER

GOING THROUGH MAN DOOR, SOMETHING WENT IN EYE

EE WAS LIFTING 50 LBS SAMPLES OVER TAILGATE OF PICK UPTRUCK WHEN SOMETHING PULLED I LEFT WRIST.

EMPLOYEE WAS DESCENDING FROM RAILROAD CAR AND TURNED HIS ANKLE.

EMPLOYEE WAS HELPING TO REMOVE BUCKET LIFT.

EMPL HAD GONE INTO BLACKSBURG IN COMPANY PICKUP TRUCK TO GET SUPPLIES.DEER RAN IN FRONT OF HIM CAUISNG HIM TO LEAVE ROAD.PULLED MUSCLE IN GROIN CLIMBING OUT OF TRUCK WINDOW.RX ONLY.

EMPLOYEE WAS BE3DING CONDUIT & S TRAINED RIGHT HIP

EMP WAS CLOSING3DOOR ON RAILROAD CAR AND BAR SLIPPED MASHING LITTLE FINGER ON L HAND

EMPLOYEE WAS STRAIGHTENING RAIL ON TRUCK. FINGER WAS CAUGHT BETWEEN STEEL AND RAIL.

EMP WAS HELPING UNLOAD AN OPEN HOPPER RAIL CAR HE WAS HOLDING DOOR LATCH OPEN WHEN DOOR WAS FORCED OPEN BY A LARGE ROCK