Buscar en el registro

EE was putting a pontoon under a pipeline. While putting the cap on one of the pontoons, the cap fell and mashed finger.

A can of starter fluid was tossed to employee. He missed catching it and it hit a motor, bounced off and stuck him above his left eye. He had 6 stitches above eyebrow to close up the cut.

Employee injured his back welding. He pulled on a piece of heavy metal and his back popped. Injured his lower right side of his back.

Employee was putting on an exhaust pipe when it slipped off and hit himself in the head leaving a 2 inch cut in the left side of his head.

Employee was working on the dredge pump and logwasher, picking up heavy parts and breaking bolts loose with a pull handle when he strained his lower back.

EE was laying a 55 gallon drum, full of oil, down on the ground. He pinched his fingers between the oil drum and a spool of rope.

Employee was patching a pipe and it mashed his pinky finger.

Employee was tightening a cable on the back of the gravity plant when the excavator bucket leaked down and caused a pipe to slide and smash his left foot.

Employee was checking the bearing on the outboard side of a Diester vibrator. He was turning the timing gears and pinched his right index finger.

EE WAS UNLOADING A BED ROLLER WHEN HIS RIGHT HAND GOT PINCHED BETWEEN 2 OF THEM.

He attempted to lift a 4D battery & strained back.

THIS ACCIDENT WAS JUST REPORTED TO US THIS WEEK (4/22/04). EMPLOYEE NEVER MENTIONED ANY INJURY WHILE EMPLOYED. WE HAVE NO DETAILS ABOUT WHEN OR HOW THE INJURY HAPPENED OR ABOUT ANY TREATMENT RECEIVED. EMPLOYEE SAYS INJURY HAPPENED 8/10/03, A SUNDAY, WHEN THE PLANT WAS NOT WORKING. HE WORKED THE FOLLOWING 6 DAYS AND WAS FINE.

EMPLOYEE CALLED 3/7/03 TO SAY HE HAD A SHARP PAIN IN RIGHT THIGH. HE SAYS HE MAY HAVE HURT IT BY WALKING THE "WRONG WAY" ON THE MUD BELT ON 3/5/03 - OR HE MAY HAVE HURT IT 2 WEEKS AGO WHILE WO RKING ON THE DRILL TRUCK TOWER. NORE: ON 2/21/03 EMPLOYEE CALLED IN TO SAY HE HAD HURT HIS GROIN AT HOME THE NIGHT BEFORE. HE WAS OFF WORK UNTIL 2/27/03.(SAME TIME HE SAYS HE HURT IT ON DRILL

EE WAS WORKING OFF THE PADDLE WHEEL DREDGE, PULLING A CABLE TO WRAP AROUND A PIPE. HE CALLED THE NEXT DAY & REPORTED THAT HE HAD PULLED A MUSCLEIN HIS BACK.

EE WAS CLIMBING INTO A BOAT FROM DREDGE. THE HANDRAIL BROKE. HE GRABBED THE SPUD CARRIAGE TO KEEP FROM FALLING, AND THE HANDRAIL FELL ON HIS LEFT HAND BRUISING HIS THUMB AND INDEX FINGER.

EMPLOYEE WAS PULLING SAFETY GOGGLES DOWN OVER THE BRIM OF HIS HARD HAT. THE GOGGLES SLIPPED AND HIT HIM IN THE LEFT EYE, SCRATCHING HIS EYE.

THE EMPLOYEE DOES NOT KNOW HOW OR WHEN OR WHERE HE SUSTAINED HIS INJURY. WE HAVE ASSUMED RESPONSIBILITY FOR HIS TREATMENT UNDER THE ASSUMPTION THAT IT POSSSIBLY/PROBABLY HAPPENED AT WORK. HE R EPORTED ON 9/11/01 THAT HE WAS EXPERIENCING PAIN IN HIS LOWER LEFT ABDOMEN.

EMPLOYEE WAS ON THE MUDBELT. THE BACKHOE WAS PUSHING THE MUDBELT BACK. THE HEADLINE ROPE CAME LOOSE AND HIT EMPLOYEE ON THE LEFT ARM CAUSING A FRACTURE.

EE WAS PUTTING A SAND PIPELINE TOGETHER-PART OF PIPE WAS BEING MOVED WITH TRACKHOE. OPERATORS SWUNG PIPE AROUND AND HIT EE ON RIGHT THIGH CAUSING TRAUMA & HEMATOMA.

EMPLOYEE WAS WORKING ON CREW WITH DRILLD RIG OBTAINING SAND AND GRAVEL SAMPLES. HE WAS SHOVELING SAND AND GRAVEL SAMPLES WHNE HE HURT THE BACK OF HIS NECK AND LEFT SHOULDER.

EE WAS HELPING TEAR DOWN A GRAVEL PROCESSING PLANT. HE WAS HELPING LOWER THE FRAME FOR A CONVEYOR BELT. FRAME WAS SET DOWN BUT NOT SECURED. THE FRAME SHIFTED AND SLIPPED DOWN ON HIS FOOT.

THE EE WAS MOVING A SAND BLASTING POT, WHICH IS MOUNTED ON WHEELS, BY PULLING IT. HE STRAINED A MUSCLE IN HIS BACK BEHIND HIS LEFT SHOULDER.

EE WAS FILLING SAND BLASTING TANK WITH BLASTING SAND. HE WAS BENT OVER, AND WHEN HE TRIED TO STAND HE WAS NOT ABLE TO STAND UP STRAIGHT.

EE WAS RUNNING GRAVEL SAMPLES. A PIECE OF GRAVEL FLEW UP AND CUT HIS RIGHT CORNEA.

EMPLOYEE AND ANOTHER CO-WORKER WERE PREPARING TOPUT OIL ON A DREDGE. THE OIL RACK WAS LAYING ON AN ELECTRIC WIRE, SO THEY LIFTED IT(OIL RACK) TOMOVE IT OFF THE WIRE. LATER IN THE EVENING, EMPL OYEE COMPLAINED OF BACK PAIN AND WAS SENT TO THEEMERGENCY ROOM TO BE CHECKED.

EE WAS MOVING AN 8D BATTERY FROM ONE MOTOR TO ANOTHER. WHEN HE PULLED ON BATTERY, HE FELT A PULL IN LEFT LOWER BACK. EE DID NOT WISH TO GO TO DR. ON 8-12 HE REPORTED CONTINUING PROBLEMS WITH S ORENESS IN HIS BACK & WAS SENT FOR MEDICAL EXAM.

REMOVING 10" GRAVEL PUMP SHAFT OFF OF TRUCK. END OF SHAFT MASHED HIS FINGER BETWEEN THE SHAFT AND THE BED OF THE TRUCK. HE PULLED HIS HAND AWAY AND THE SHAFT CUT HIS FINGER REQUIRING 10 STITCH ES.

EE WAS SHOVELING MUD OFF MUD BELT. HE SAID HE PULLED HIS BACK WHILE DOING SO

ON 6-7-99 EE REPORTED THAT HE WAS WELDING IN A TIGHT SPOT BETWEEN 2 PONTOONS. WHEN HE CLIMBED OUT, HE TWISTED HIS BACK. HE TOOK ADVIL AND WORKED THE REMAINDER OF THAT DAY AND ALL DAY 6-8-99. O N 6-9-99 HE ASKED TO GO TO DR AND WAS OFF WORK ONE DAY.

EMPLOYEE ARRIVED AT WORK WHICH HAS A BROKEN INSIDE DOOR HANDLE. HE ATEMPTED TO OPEN THE DOOR BY REACHING THROUGH WINDOW, BUT WAS UNABLE TO. HE THEN CLIMBED OUT WINDOW AND INJURED HIS BACK. HE DID NOT REPORT INJURY OR SEEK MEDICAL ATTENTION UNTIL 04/24/99. BACK STRAIN.

HE WAS REPLACING THE CUTTING EDGE ON A WHEEL LOADER WHEN HIS FINGER SLIPPED AND WA CUT ON THE EDGE OF THE BUCKET. HE CUT THE LITTLE FINGER ON HIS RIGHT HAND, RECEIVED 6 STITICHES, TETANUS SHOT AND ANTIBIOTICS.

EE WAS REPLACING THE STARTER ON CAT LOADER. HE HAD TO BEND DOWN AND REACH OVER THE FRAME TO REACH THE STARTER. IN DOING SO HE STRAINED HIS LOWER RIGHT BACK. HE DID NOT REPORT BEING INJURED UNT IL 6-1-98.

EMPLOYEE LIFTED A 6"X 30' LONG PIPE ONYO A BLOCK IN ORDER TO CUT IT. AT 5:00AM ON 2/20/98 HE BEGAN EXPERIENCING CHEST PAIN. HE REPORTED TO WORK & AT 7:00 AM WAS TAKEN TO THE HOSPITAL. AFTER OB SERVATION, HE WAS DIAGNOSED WITH A CHEST WALL STRAIN.

EMPLOYEE SHUT DOWN FRONT END LOADER. HE BENT OVER TO EXIT THE CAB. WHEN HE STOOD BACK UP, HE HAD A BACK PAIN IN HIS LOWER BACK.

EE WAS BOLTING REPLACEMENT PADDLES TO LOG WASHER. THE WEIGHT OF THE PADDLES APPARENTLY CAUSED THE SHAFT OF THE LOG WASHER TO TURN, TRAPPING HIS RIGHT LOWER LEG.

EMPLOYEE WAS PULLING A 1" RUBBER HOSE TO WASH MUD OFF BELT ROLLERS. HE TORE PECTORALES MUSCLE ON LEFT CHEST.

EMPLOYEE WAS LOOSENING A CHAIN BINDER THAT WAS SECURING A LOAD OF STEEL ON A DELTA LO-BOY TRAILER. HIS MIDDLE FINGER OF RIGHT HAND WAS CAUGHT BETWEEN THE BINDER AND THE TRAILER. FINGER WAS M ASHED AND FRACTURED.

EMPLOYEE WAS CRANKING A GENERATOR. HE TORE MUSCLE IN HIS CHEST AWAY FROM THE STERNUM.

EE WAS CHANGING THE HEATER HOSE ON A LOADER & TWISTED HIS BACK.

EMPLOYEE PLACED A BEAM ON THE TAILGATE OF A TRUCK. HE WAS TURNING THE BEAM TO CUT A PIECE OF PLATE OFF OF IT. A BURR ON THE BEAM STUCK IN THE PLAM OF HIS LEFT HAND. THE TURNING MOTION CAUSED T HE BURR TO RIP A DEEP, NARROW CUT IN THE PALM.

EMPLOYEE LIFTED A HOME-MADE CABLE BLOCK INTO A LOADER BUCKET, HE STRAINED MUSCLE IN HIS LOWEER LEFT BACK AND LEG.

EMPLOYEE WAS FABRICATING A GATE FOR THE HAUL ROAD ENTRANCE USING 2"X2" METAL TUBING. HE WAS LOOKIGN ALONE. AFTER TACK WELDIGN A 12' PIECE TO A 25' PIECE HE STOOD IT UP VERTICALLY. WHEN HE T URNED IT LOOSE, IT FELL AND STRUCK HIM IN THE HEAD ABOVE THE RIGHT EAR.

EE WAS IN A SMALL ALUMINUM BOAT - HE LEANED OUT & CAUGHT HOLD OF A PONTOON ON WHICH THE TAIL LINE OF A DREADGE WAS CAUGHT [HE WAS ATTEMPTING TO FREE ROPE] HE TWISTED HIS KNEE.

THE EMPLOYEE WAS LEANING OVER TO ROLL OVER A PIECE OF H-BEAM. HE PULLED A MUSCLE IN HIS LOWER BACK.

EMPLOYEE WAS ASSISTING ANOTHER EMPLOYEE UNLOADING 55 DRUMS OF HYDRAULIC FLUID USING CRANE HOIST TYPE LIFT WITH CHAINS DRUM SWUNG TOWARD EMPLOYEE INJURING SHOULDER

EMPLOYEE REPORTED THAT HE WAS PERFORMING REPAIRS TO LOG WASHER ON DREDGE AND "BUMPED HIS KNEE". WE WOULD LIKE TO NOTE THAT EMPLOYEE DID NOT REPORT THE ALLEGED INJURY UNTIL TWO DAYS LATER.

IT IS UNKNOWN AT THIS TIME EXACTLY WHEN AND HOW EMPLOYEE WAS INJURED. THE DIAGNOSIS FOR THE INJURED EMPLOYEE IS "BACK PAIN, RADIATING TO LOWER LEG." THE EMPLOYEE WENT TO THE DOCTOR ON OR ABOUT 8/10/90.

EMP WAS TRANSFE9ING DRILLING RESIDUE FROM FILTERING PAN WITH A SHOVEL AT APPROX 2 PM 10 06 86 INTO A PIL E NEAR THE PAN HE BEGAN COMPLAINING OF BACK PAIN BUT WAS ABLE TO3COMPLETE THE FULL DAYS WORK APPROX 4 HOURS UNTIL 6 PM