Buscar en el registro

Employee was moving rail cars around when EE rubbed EE's right eye causing something to get in EE's eye.

Miners was installing drive belts on a crusher, when they got their little finger on left hand caught between shive and belt. This caused a fracture and a laceration requiring stitches.

Employee was working on Canica crusher in C5, and was under the belt tunnel removing covers to get to the belts and sheave when a piece of metal got under EE's safety glasses and into EE's eye.

Employee was helping install a plate in the top apron of the primary crusher when the plate they were holding slipped and came in contact with their neck. The plate had just been cut to fit in place and still was hot, welder was going to weld into place with employee holding it for them.

Employee burnt left forearm on take-up that was hot when trying to adjust for better position to cut bearing off PC3 tail pulley.

Employee was putting bucket pin on a front end loader when it fell out of the pin boss smashing their left pinky finger against the boom arm.

While cleaning material on secondary screen tower, a rock rolled down and struck employee's shin.

Employee was assisting another worker with a belt splice when EE was struck in the eye by a foreign object

While lifting a railroad tie to place in the rear of a maintenance truck, employee felt a shooting pain in right bicep with tingling in fingers.

Miner was in the pit and responded to loader operator reporting coolant issue. Miner went to put coolant in the loaders and when miner went to crack the cap the hot pressurized coolant sprayed the miner in the neck and upper torso.

While assisting install a loader bucket pin, the pin slipped and thumb was caught between pin and loader bucket.

While working on FS1 changing screens, back started hurting as day went on.

Employee was helping with wash plant screen replacement. Another employee rolled a second bad screen down the stairs where it hit the employee lacerating EE's skin at the knee and requiring 10 stitches.

Strain in abdomen while locking up railcars.

A liner being replaced in the primary crusher was held in position by a maintenance truck crane and the miner. The liner slipped and the miner went to hold it when EE heard a "pop" and felt a sharp pain. Management notified of accident on 9/22/20 but was not notified treatment was sought for injury until 10/27/20. Miner was placed on leave by the doctor on 10/28/20.

Miner was doing preventative maintenance on an air separator. When EE took EE's last step up onto the platform EE felt a "pop" in EE's left knee.

While replacing an acetylene tank on a maintenance truck, the tank slipped and pinched the left hand middle finger between the tank and holding enclosure resulting in 6 stitches.

Employee was mounting front-end loader and stepped over a mudpuddle to avoid getting feet wet. Strained lower back when employee pulled self onto ladder.

Employee was helping install a section of dredge pipe when EE got leg pinched between the two sections of pipe. Injury was abrasion/contusion of left lower leg.

Pulling sticks from the trailer, right shoulder popped

Lifting and pushing screen head resulted in hernia in abdomen. Returned to work full duty after missing 1 day. Potential for surgery in the future.

Employee opened a storage bin chute when fine material fell and got in EE's right eye. EE was diagnosed with a corneal abrasion.

Lifting/pulling screens or hammers and pulled muscle. Diagnosis of Right Inguinal Hernia was made on June 25, 2018. Lost time began July 3, 2018.

Employee was closing the lid on a covered hopper when the hook slipped causing EE to pinch finger between the hook and handrail. Fracture/Laceration of right middle finger.

The employee was assisting on cutting out the S2 screen support tube and was sliding the pipe out the back and misjudged where the floor was and let go resulting in the pipe striking the fifth digit on EE's left hand. The finger received a small laceration and possible nondisplaced fracture.

Employee was carrying a replacement screen cloth up a conveyor catwalk when ee hit a support with the cloth injuring right shoulder. Injury was a dislocated shoulder.

Employee pushed a large piece of clay off the conveyor and felt a pain in back.

Employee claims hit head on a chute while pulling a hose across the floor. This claim was disputed by the employer. Ohio BWC recently ruled this injury was work related. Notification was received by employer on July 15.

Employee lifted a drill hammer and felt a "pop" in lower stomach. Company received medical reports on 2/9/16 confirming a hernia. Employee has and will, continue to work until he has surgery, which has not yet been scheduled.

Smashed his fingers between the door and the lock while opening a rail car. A small laceration was closed with Steri-Strips and blood was drained from under the fingernail of his middle finger on his right hand.

Employee was picking clay chunks off the picker belt when he felt a sharp pain in his back and side.

Employee was helping install a crusher feed ring and pinched his right thumb between the ring and shaft. Injury was a laceration of the right thumb needing three stitches to close.

Employee claimed that he developed pain in his shoulder and neck region over a period of time while performing housekeeping duties. NOTE: This claim was originally declined for untimely reporting and an unspecified mechanism of injury. Ohio BWC recently ruled that this injury was work related.

Employee was changing two troughing idlers. The first one was set into place. When the second was set, it caused the first to flip over striking the employee's arm. Injury was a laceration to the right wrist that required stitches.

Employee was using a shovel to clean the tunnel when he felt pain in his groin area.

The employee was removing a liner bed from a conveyor when it slipped. He tryed to catch it and felt a "pop" in his wrist and elbow.

Was moving conveyor trusses around when the wind blew a foreign object into his right eye.

Employee lifted a ladder and felt a pain in his back.

Employee was cleaning a screen rail when a piece of steel flaked off and imbedded itself in his hand.

The employee was pouring concrete near the office between 6:00am and 11:00am. He got some wet concrete on the inside of his rubber boots which burned both his legs. Lost time did not begin until 06/13/2012.

Employee was placing a guard on the back of a flatbed truck when he pinched his finger between the guard and truck, amputating the tip of his left long finger.

The employee lifted a lid off the 20's bin and felt a pain in his back. Injury was a sprain/strain. This was not a reportable accident until January 21 when the employee missed work.

Employee was struck by a piece of bearing housing after striking it with a hammer. Injury was a cut lip and chipped tooth.

Slipped while dismounting front-end loader causing a wrist sprain when he caught himself from falling. NOTE: This claim was originally contested. It was ruled a workplace accident by Ohio BWC on January 25, 2010.

Employee felt pain in lower abdomen after lifting a screen panel. Result was strain of the lower abdomen.

Employee was moving conveyor idlers and pinched his finger between two idlers. Note: This injury is reportable due to blood being drained from under his finger nail.

Employee was cleaning around conveyors when a return idler guard fell off and struck his left hand.

Employee was manually rolling the crusher reel over to check it. Pinched his finger between the reel and the crusher wall, lacertaing his finger. Wound required stitches to close.

Pinched his thumb between two wear-plates while repairing chutes. The employee did not seek medical attention until July 8, 2008 after pain developed where the thumbnail is growing.

Was slidding a 6 inch gate valve from the forklift onto a shelf, when it flipped over and pinched his finger between the valve and the shelf.