Buscar en el registro

EE was removing a broken coil spring from a jaw crusher. EE thought had released all tension on the spring, but bottom broken section was still under tension. As EE was removing spring, bottom section released smashing LT thumb.

Employee was removing/unjamming rocks from a cone crusher. While adjusting the rocks one fell on the tip of EE's right ring finger causing a small laceration and swelling.

Employee was placing metal screens onto a screener box. While placing the 3rd screen of 4, EE caught EE's left thumb between the screen and the screener wall. This resulted in a broken left thumb.

Employee was working on tail pulley when it slipped and partially fell on left thumb. Left thumb badly swollen - clinic said ice only - no stitches - no broken bones - was given narcotic for pain.

Employee said right eye was irritated. EE was taken to eye clinic. Clinic said there were no foreign objects in eye. Eye was flushed and EE was told to put drops in and EE would be fine. Employee does wear contacts which might have scratched lens.

I.E. was closing door on screen plant and pulled door against middle finger on rt hand.

Employee was lifting crusher screen when he dropped it against left shin causing scrape.

Employee pulled metal shelf down onto his RT thumb employee went to ER and was treated.

Employee leaned on hot muffler with palm of left hand. Employee went to E.R. and was treated. Employee said he felt fine and reported back to work on 9/13/13 with limited duty.

Employee said he was lifting equipment and his lower back was hurting. Disclosed that he has been treating at same chiro for non-work related injury of lower back.

Employee was lifting a bucket of aggregate for testing lab when his back went out needing chiropractic visit.

Employee was changing crusher dies when the welded hook fastened to the die failed. Legs of the employee were trapped underneath the crusher die.

EE was assisting in setting up the crusher and said he strained his back. Said he was ok, this claimed turned to reportable because ee is seeing a chiropractor.

EE was lifting blocks when he felt slight pain in stomach went to MD 9/11/2009 diagnosed with hernia. Able to work until surgery can be scheduled.

Employee was lifting 20 lbs block when he stated his knee hurt.

carrying & moving a toggle block for crushing plant. Lifting & then twisted to set it down, injuring low back.

Operating Bobcat, he positioned Bobcat to hook onto trailer. Trailer has a jack w/wrench. He lifted tongue of trailer to hook onto ball of the Bobcat.

Ee was coming down off the ladder of the roll-plant. he had one foot on the ladder and one foot ont he ground. he turned to walk away & twisted his knee.

EMPLOYEE WAS IN THE PROCESS OF CHANGING SCREENS. HE HIT HIS LEFT KNEEE AND SHIN ON THE BEARING AND GEAR RESERVOIR. HE RECEIVED A CONTUSION TO HIS KNEE AND SHIN (SWOLLEN).

TRYING TO GET A RAM ON CRUSHING PLANT, CHAIN SLIPPED & PULLED EMPLOYEE'S ARM, STRAINING ARM.

SHOVELING CONVEYOR SPILLAGE, EE STRAINED LOWER BACK.

EMPLOYEE CALLED & STATED HE HURT HIS BACK AWHILE AGO. HE SAID HE NORMALLY GOES TO THE CHIROPRACTOR 2 OR 3 TIMES & IT HELPS THE PAIN BUT IT DID NOT HAPPEN THIS TIME. HE IS IN SEVERE PAIN & WALK ING AWKWARDLY.

EE WAS CHANGING SCREENS WITH HIS CREW. THEY WERE MANUALLY LIFTING THE SCREENS. LATER THE NEXT DAY, HE NOTICED A LUMP IN THE ABDOMINAL AREA.

RESETTING CONVEYOR WITH LOADER AND LIFTING CHAIN. CHAIN WAS UNHOOKED AND SWINGING WHILE LOADER OPERATOR WAS BACKING UP. CHIN LATCHED ON THE CONVEYOR WHILE LOADER WAS STILL BACK UP, SWINGING TH E CONVEYOR INTO EE AND LANDING ON HIS RIGHT FOOT.

LIFTING AND INJURED/ STRAINED RT HIP.

LIFTING CONE UP TO GET DUSTRING OFF. THE CONE WAS ALREADY OUT OF THE PLANT. DUST RING FELL CRUSHING RIGHT PINKY FINGER TIP

CHANGING A LACING ON THE SCREEN BELT. REMOVING A PIECE OF IRON 4"X4'CUT RT LITTLE FINGER (3 STITCHES).

CARRYING CONTROL PANEL FOR BREAKER, STOOD UP, AND LOWER BACK GAVE OUT.

ON 9-3-96 EE WAS LIFTING A SCREEN, AND FELT PAIN. HE WAITED UNTIL 9-9-96 TO GO INTO THE DR S OFFICE, THATS WHEN HE WAS DIAGNOSED WITH A HERNIA SURGERY ON 9-17-96.

EE WAS MOVING THE TORCHES THAT WERE ON A CART. THE ACETYLENE TANK CAME DOWN, SMASHING HIS FINGER (STITCHES).

PLANT 1 WAS BEING MOVED. EE WAS CARRYING A PIECE OF ANGLE IRON AND DROPPED IT ON HIS LEFT PINKY.

EE WAS LIFTING ACOMPRESSED GAS CYLINDER TANK, UP INTO HIS PICK-UP TRUCK, WHEN HE FELT HIS BACK GO OUT.

EE WAS LIFTING THE SCREEN CLOTH UP ONTO THE SCREEN PLANT, AND HE FELT PAIN IN HIS BACK, BETWEEN HIS SHOULDER BLADES.

CHANGING SCREEN ON A CRUSHING PLANT. WHEN PULLING ONE OF THE SCREENS OUT, EE STRAINED HIS SHOULDER, AS THE SCREEN WAS STUCK.

HE WAS BENDING OVER TO PICK UP A 10LB PIECE OF STEEL, AND WHEN HE STRAIGHTENED UP, HE HA D APAIN IN HIS LOWER RIGHT SIDE OF HIS BACK.

OUREMPLOYEE WAS USING WELDING STINGER AND TOSSED IT UPON A SAFETY RAIL ON BREAKER AND IT FELL HITTING EMPLOYEE IN UPPER LIP.

DOOR ON LOADER SWUNG SHUT,STRIKING EMPLOYEE ON ELBOW.

LIFTING ON PC OF STEEL ON SCEENING PLANT IT SLIPPED CAUSING HIM TO FALL

WHILE SHOVELING SAND,TORE LOWER BACK MUSCLES.