Buscar en el registro

Employee was exiting the maintenance truck and when EE closed the door with left hand, EE felt a pop and pain on the right side of neck.

Helping load a screen bearing in skid steer loader bucket. Bearing rolled pinching finger against side of loader bucket. Went to hospital some stitches required.

While assisting in carrying a wire cable, both employees slipped and fell due to mud conditions. Employee's wrist was cut by the cable by employee falling. Went to Princeton Community Hospital for attention. Treated and released after application of adhesive in lieu of stitches.

Plant operator was cleaning out around overloaded screen unit. While doing the clean out a rock fell on their finger. Plant supt. transported to Bluefield Regional Medical, treated and released. No stitches or sutures.

Employee was handing a box of 1 1/2 inch x 10 inch bolts out the driver side window of a pickup when the box slipped out of his left hand, he tried to grab hold with his right hand and felt a pull in groin area.

While descending steps from operators room at High Cal plant, employee stopped five steps from stairs end to pull a 1 1/2 inch water hose used for cleaning and felt a pain in his right bicep. Sent to hospital for evaluation.

Maintenance work on plant individual was being handed a tool (3 ton come-a-long) by another employee. Finger was caught between the tool and plant frame causing a cut that required 3 stitches.

Injury not reported until 06/11/2013 at 11:15AM Highway Truck driver possible sprain to stomach area while opening hood on truck. Supervisor was present at the time, no indication given as to supervisor by the driver of any injury at that time. Injury reported as noted.

Employee was removing front idler and cannon on Cat D8R dozer. There was a 12"-15" rock wedged between roller frame and main frame. Employee was reaching over push-arm and roller frame to removed rock. Employee felt pain in lower - left area of his back.

Highway delivery truck driver-Removing stone buildup on tailgate apron-Schotched the tailgate to keep the tailgate open in order to clean the area-Wheel choked slipped allowing tailgate to close under its own weight striking the drivers hand.

Individual welding hand rail, rail began to fall he caught rail and by doing so jerked his left arm.

Cleaning out a rock box, loose rock fell and broke finger on left hand.

Employee climbing access ladder to enter cab of machine pulled tendons in right wrist.

Injury to left hand ring finger and small finger. Pinned between engine parts while helping mechanic. Received stiches to both fingers and small finger broken.

Perfroming maintenance, piece of metal hit left foot. Swelling later after going home. Hospital treted and released same evening.

Contractor employee, crushing plant demolition, lacerated hand on rail on manlift. Operator was positioning work platform and hand brushed metal structure.

EE helping maintenance man hook chain up to lifting hook to break loose wedged rock in feeder a loose rock about size of football rolled down about 5' and struck him on right leg. The leg does have a cut about 11/2" long. Supervisor sent man to emergency room.

Pulling air hose in shop to air tire up on truck. Pulled bicep muscle in right arm.

EE WAS HELPING DRILL OPERATOR PULL HOSE WHEN EE FELL AND INJURED LEFT ANKLE

SHOVELING PACKED MATERIAL FROM UNDER TUNNEL CONV. BELT USING A LONG-HANDLED ROUND-POINT SHOVEL. MATERIAL PACKED VERY TIGHTLY AND EE HAD TO USE THRUSTING MOTION & GREAT EFFORT TO DISLODGE, IN ORDER TO SHOVEL & CLEAN. DURING THRUSTING MOTION, THE PACKED MATERIAL BROKE LOOSE & CAUSED EE'S RIGHT WRIST AREA TO STRIKE THE CONVEYOR STRUCTURE. MINE SUPT. FIRST INFORMED OF ACC. 5/21.

EE ASSISTING DRILLER LOAD DRILL STEEL AND HAMMER ONTO DRILL RIG.

MOVING BELT ROLLERS IN STORAGE SHED TO GET TO SPARE TIRES; BELT ROLLER HIT DOOR (WEIGHING APPROX 45-50 LBS) (SIZE 30" X 48") CAUSING LEANED DOOR TO FALL AND STRIKE EMPLOYEE ON SIDE OF LEFT HIP .

WAS DIGGING OUT CRUSHER RUN CHUTE AND MATERIAL FELL IN ON LEFT FOOT.

WAS DRILLING BOLTS OFF OF ROLLER ON DOZER AND STARTED TO WIPE BROW AND A PIECE OF METAL FELL FROM GLOVE INTO RIGHT EYE.

CORPORATE MAINTENANCE EE MAKING REPAIRS TO OFFICE ROOF CAME IN CONTACT WITH FIBERGLASS INSULATION WHICH CAUSED ALLERGIC REACTION

EE WAS SHOVELING UNDER BELT AT SAND PLANT WHEN PAIN DEVELOPED IN BACK & RIGHT LEG

SHOVELING SPILLED CRUSHED MATERIAL FROM UNDER SURGE CONVEYOR BELT, (BENDING, TWISTING, LIFTING MOTION) FELT PULL IN BACK.

EE WAS LIFTING TIRE OFF WHEEL DOLLY, TIRE SLIPPED FORWARD CAUSING EE TO LOOSE BALANCE THUS STRICKING CHIN AGAINST TOP OF TIRE DOLLY.

EMPLOYEE WAS UNDER TRUCK BRAISING MUFFLER WHEN A PIECE OF MOLTEN BRASS STRUCK HIS LEFT ARM.

EE WAS SHOVELING XXX STONE FORM UNDER PULLEY TOMAINTAIN EQUIPMENT OPERATION WHEN HE EXPERINECED LOWER BACK PAIN AND NUMBNESS IN HIP.

MOVING METAL BOX FROM END LOADER, LID SLIPPED AND CAUGHT MIDDLE FINGER ON LEFT HAND CUTTING END OF FINGER ALMOST OFF.

EE WAS PICKING UP A WELDER AND PULLED MUSCLE IN HIS BACK.

EE WAS LIFTING A PIECE OF METAL AND INCURRED BACK PAIN.

HE WAS CARRYING LARGE BOX TO SCALEHOUSE OFFICE FROM SUPERINTENDANTS' OFFICE BUILDING. BOX OBSTRUCTED VIEW AND HIT LEFT KNEE ON METAL POLE THAT WAS PLACED AS BARRIER.

LIFTING A PIECE OF METAL INTO BACK OF TRUCK.

BRINGING A PIECE OF METAL INTO SCREEN HOUSE, HIT DOOR FACING AND METAL SLIPPED CUTTING 5 TH. FINGER ON RIGHT HAND.

MAINTENANCE MAN WAS REMOVING A PORTION OF EXHAUST PIPE (CAST IRON, APPROX. 16" IN DIA, WEIGHING APPROX. 40-60 LB) FROM A 769-C 35-TON CAT HAUL TRUCK. EXHAUST WAS UNBOLTED, BUT JOINT WAS STUCK. WHILE IN PROCESS OF BREAKING JOINT CONNECTION, THE UNION SUDDENLY BROKE AND SECTION OF EXHAUST FELL ON LEFT HAND, WHICH WAS POSITIONED ON TRUCK FRAME FOR SUPPORT AS SUBJECT WAS STANDING ON TH

WAS LOADING TIRE INTO SERVICE TRUCK, WHEN TAIL GATE BROKE CAUSING STRAIN ON BACK.

EMPLOYEE DRILLED HOLE FOR ANCHOR TO SAFETY BELT, BENT DOWN TO PUT ANCHOR IN HOLE, A PIECE OF STEEL FELL FROM STEEL HOLDER & HIT HIM IN LOWER BACK.

EMPLOYEE WAS PULLING PUMP OUT OF POND, WHEN HE ATTEMPTED TO THROW CHAIN ACROSS I BEAM, CHAIN CAME BACK HITTING HIM IN THE MOUTH, BREAKING A PIECE OF THE EYE TOOTH ON THE RIGHT SIDE.

EMPLOYEE WAS ATTEMPTING TO COME DOWN A LADDER FROM 180-D SHOVEL.

EMPLOYEE WAS WELDING/WORKING ON METAL FRAMING (PLANT CONTROL BUILDING). CRAWLING UNDER CROSS MEMBER BUMPED RIGHT ELBOW ON 6" CHANNEL IRON CAUSING ELBOW TO SWELL.

STANDING ON CAT WALK RECEIVING CANICA ANVILS (APPROX WT 40- LB EA) FROM FELLOW EMPLOYEE, TWISTED BODY AND TOSSED ANVILS APPROX 8-10 FT. FELT PAIN IN UPPER LEFT ARM AND LEFT CHEST AREA, NUMBNE SS IS LEFT ARM AND SHOULDER.

EE WAS INSTALLING THE BELLY PAN ON A CAT 980B WHEN THE PAN SLIPPED OFF THE JACK AND FELL ON HIS LEFT HAND CUTTING HIS THIRD FINGER.

HIT LEFT ELBOW ON ENGINE COMPARTMENT DOOR WHILE REACHING WHERE OIL DIPSTICK WAS TO CHECK OIL LEVEL LEFT ELBOW HAS PAIN BUT NO SWELLING

WHILE CLOSING DRIVER'S SIDE DOOR ON #30471 CAT TRUCK, MASHED TIP OF INDEX FINGER ON RIGHT HAND. MASHED INDEX FINGER BETWEEN DOOR AND DOOR FRAME.

WHILE WORKING ON CONSTRUCTION OF MAINTENANCE SHOP, WAS HANDING I-BEAM (APPROX. SIZE 22" X 40') WIGH ASSISTANCE OF TWO OTHER EMPLOYEES, TURNED BEAM FOR PURPOSE OF WELDING AND FELT PAIN IN LOWER MID BACK AREA.

CLIMBING ON TO NORTHWEST 180-D SHOVEL TO OEPRATE-STRAINED LEFT FLANK ON RIGHT LEG.

EE WAS ATTEMPTING TO STOP A RUN AWAY TRUCK WHEN HIS LEFT FOOT BECAME LODGED IN BETWEEN TWO ROCKS.

WHILE WORKING ON METAL TOOL BOX IN SHOP WELDING SHED EE PICKED UP A PIECE OF FLAT SHEET METAL 1/4IN THICK X3FTX10FT BY HIMSELF ACCOUNT OF WEIGHT OF SHEET & AWKWARDNESS IT SLIPPED FROM HIS HAND S & MASHED RT HAND BETWEEN GROUND & METAL