Buscar en el registro

On 8-1-06 employee reported feeling pain is his stomach to his foreman while bagging 50 lb bags of Talc. On 9-7-06 employee went to his own Doctor who diagnosed a Hernia. On 9-8-06 employee reported Dr visit to Company. Surgery was scheduled and employee started losing time today 11-29-06.

Employee was helping move 4D batteries. (100 + lbs) Felt pain in right shoulder.

Sample chute was plugged to sample roll crusher, EE tryed to pull removable section of chute to clear. When section came loose it pinched his "R" little finger between chute and guard.

EE WAS LIFTING, PUSHING AND PULLING IN VARIOUS PARTS OF THE MILL. HE NOTICED THE PAIN ON 7/1/03, AND WAS GETTING WORSE AS TIME PASSED.

THROWING 50 LB BAGS AT NO 3 PACKER, EE FELT SHARP PAIN IN MIDDLE OF BACK

EE CLAIMS TO HAVE INJURED HIMSELF ON MAR.3, 2003HE WENT TO EMERGENCY ROOM ON APRIL 14TH. DURING THE PAST 6 WEEKS THE EE NEVER INDICATED TO HIS FOREMAN OR OTHER STAFF THAT THIS INJURY HAD OCCU RRED . EE CLAIMS TO HAVE STRAINED HIS ABDOMEN LIFTING A PROPANE BOTTLE ONTO A FORKLIFT. ER PHYSICIAN LIST TORN ABDOMEN MUSCLE

EMPLOYEE LIFTED AND TURNED A 5 GALLON PLASTIC PAIL CONTAINING LESS THAN 2 GALLONS OF PAINT. 5 GALLONG PAIL WAS ON A 2' HIGH STAND. EE FELT STRAIN IN LEFT LOWER BACK.

CATCHING 50LB BAGS OF TALC HE FELT PAIN IN LEFT WRIST & FOREARM. ON MONDAY & TUESDAY, SEPT. 16TH& 17TH, HE WAS MUCKING IN THE MILL & FELT PAIN TO LEFT WRIST. LOST TIME STARTED 9/18/02.

AS EMPLOYEE WAS PULLING 10" ROTORY VALVE (APPROXIMATE WEIGHT = 70 LBS.) ACROSS FLOOR OF MACHINE SHOP HIS RIGHT HAND SLIPPED CAUSING HIS BACK AND SHOULDER TO TWIST. HE HEARD LOUD "POP" IN HIS L EFT SHOULDER.

TURNING METAL ON LATHE, REACHED IN TO PICK METALSHAVING OFF SHAFT, WAS CAUGHT BY ANOTHER METAL SHAVING WHICH LACERATED RT. THUMB.

WHILE HELPING CLEAN UP UNDER CRUSHER, EMPLOYEE FELT PAIN IN LEFT SHOULDER SHOVELING FINES INTO LOADER BUCKET. AS OF AUGUST 1ST, 2002 EMPLOYEE'S PHYSICIAN HAS TAKEN HIM OFF WORK UNTIL FURTHER NOTICE.

WHILE WORKING ON #38 CONVEYOR BELT, EE THREW WELDING CABLE OVER SIDE OF STAKE RACK WITH LEFT HAND, FELT PAIN IN LEFT SHOULDER

PACKING OUT 50 LB BAGS OF TALC ONTO PALLET, FELT PAIN IN RIGHT SIDE OF CHEST.

EMPLOYEE BENT OVER TO PICK UP A PIECE OF CARDBOARD; AS HE BENT OVER, HIS BACK "POPPED" AND HE FELT PAIN IN LOWER BACK.

CATCHING 50 LB BAGS AT #2 PACKER STATION, EMPLOYEE FELT PAIN IN BACK.

CATCHING AND PACKING 50 LB BAGS OF WOLLASTONITE,EMPLOYEE FELT PAIN IN UPPER BACK AND NECK.

UNLOADING 50 LBS BAGS OF ANFO AND 20 LBS TUBES OF POWDER, FELT PAIN IN LOWER BACK.

EE WAS CLIMBING UP LADDER INTO HAULAGE TRUCK & FELT PAIN IN LOWER LEFT BAC

EMPLOYEE WAS DUMPING TRASH CAN OF TALC WASTE INTO DUMPSTER AND FELT PAIN IN HIS RIGHT SHOULDER. HIS FIRST DAY OFF WAS 10/25/99.

AS EE WAS LIFTING GARBAGE BAG OUT OF BARREL, HE FELT PAIN IN HIS BACK.

WHILE SENDING A SMAPLE, EE TURNED AND FELT A PAIN IN HIS LEFT KNEE.

TRANSPORT LINE VALVE ALPINES 1-4. VALVE WOULDN'T MOVE BY HAND, EMPLOYEE KICKED VALVE AND HURT RIGHT RIGHT HIP.

EMPLOYEE WAS SPRAINED/STRAINED HIA BACK WHIL EHE LIFTED A HYDRAULIC JACK (APPROX. WEIGHT 100 LBS.) FROM UNDER NO.4 HARDINGS MILL. INDIVIDUAL BENT OVER TO LIT JAK UP ONTO CART AND FELT PAININ L OWER BACK.

EE WAS LINING UP HOLES FOR BUSHING AND SHEAR PIN; PUT MIDDLE FINGER IN HOLE TOP HOUSING TO LINE UP WITH BOTTOM; TURNING TOP ONE FINGER CAUGHT IN BOTTOM ONE (HOUSING HOLE) WHGILE TURNING TOP LO OSE BY HAND WITH DRIVE BELT.

THE EE WAS PILING 50 LBS BAGS AT NO.2 PACKER STATION WHEN HE NOTICED A SWELLING OF HIS RIGHT WRIST. THEE E S RIGHT WRIST WAS ALSO VERY TENDER AND HURT TO MAKE CONTACT WITH.

#4 HARDINGS DRIVE OUTBOARD BEARING LOOKED DIFFERENT THAN NORMAL. EE REACHED DOWN TO FEEL BEARING. BEARING WAS VERY HOT 150DEGREES F AND BURNED PALM OF LEFT HAND

AS EMPLOYEE UNPLUGGED A CONVEYOR BELT, ONE BAG (55 LBS.) FELL ON THE FLOOR. EMPLOYEE BENT OVER TO PICK IT UP THEN LIFTED THE BAG ONTO THE PILE AND FELT PAIN IN LOWER BACK. (CHIROPRACTOR TOOK EMPLOYEE OFF WORK AS OF 8/7/96)

EMPLOYEE WAS PACKERMAN ON 5-20 THROWING 50L BAGS. HE WAS AWAKENED WITH PAIN TO HIS HAND THE NIGHT OF THE MAY 20TH. HE WENT TO THE DR ON 5-21 WITH A DIAGNOSIS OF PINCHED NERVE TO THE HAND AND FINGERS CAUSING THE NUMBESS.

WHILE CLIMBING INTO #4 MACK M-20 EE FELT PAIN INRIGHT SHOULDER. [LADDER INTO CAB]

EMPLOYEE LIFTED ROLL OF ROOFING PAPER AND FELT PAIN IN LOWER BACK.

EMPLOYEE WAS REMOVING SCREW OFF NO. 2 PACKER PUMP, AS HE WAS REMOVING COUPLER FROM SCREW, THE COUPLING RING BOUND UP & RELEASED SUDDENLY. AS THE COUPLER RELEASED THE EMPLOYEE'S RIGHT INDEX FIN GER WAS LACERATED.

EMPLOYEE WAS MOVING STEP LADDER & PICKED UP FIBERGLASS SPLINTERS FROM SIDE OF LADDER

HELPING MILLWRIGHT MOVE TRUNNION (WT.=150LBS) WHEN ONE TRUNNION ROLLED & HIT EMPLOYEES RT LITTLE FINGER

EMPLOYEE DUMPED BARREL OF ORE INTO DISCHARGE END OF NO.4 HARDINGE AND FELT PAIN IN LOWER BACK. DIDN'T BOTHER HIM TILL END OF SHIFT.

EMPLOYEE CATCHING 50 LB. BAGS OF MATERIAL OFF PACKER, FELT STRAIN TO RIGHT GROIN.

EE WAS DRAGGING AIR AND WATER HOSES FOR DRILL MACHINE UP 700 AM14 STOPE WHEN HE FELT PAIN TO LOWER BACK.

EMPLOYEE REINJURED BACK RELATING TO BACK INJURY 7/29/92 AT NO. 1 MILL MSHA ID 33002889 PER MSHA FORM 7000-1 FILED AUGUST 3, 1992.

EMPLOYEE WAS HELPING MAINTENANCE MAN UNLOAD OXY-ACETYLENE BOTTLES OFF FLAT CAR AT 900 LEVEL M-11 STOPE/RAMP WHEN HE STRAINED HIS BACK.

EMPLOYEE WAS STANDING ON LADDER WHILE LIFTING VALVE INTO PLACE IN A TWISTING MOTION. WEIGHT OF VALVE= 40 LBS.

WHILE MOVING LARGE CHUNK OF ROCK OUT OF RAMP TO 250 LEVEL (BY HAND) EMPLOYEE FELT PAIN TO GROIN.DOCTOR'S APPT.: 09/14/92 REPORTED TO SUPERVISOR: 09/15/92.

DOING SOME HEAVY LIFTING ON #2 HARGINGE PUMP.

EMPLOYEE WAS CLEANING UNDEGROUND DRILL BENCH OFF AFTER BLASTING, WAS PUSHING LARGE ROCK OFF AND FELT PAIN IN LOWER BACK.

EMPLOYEE WAS WASHING WINDOW OF LOADER AND CUT HAND ON CLAMP OF WINDSHIELD WIPER.

EMPL WAS LIFTING MIDDLE SECTION OF AIR SLIDE INTO PLACE.NOTICED SLIGHT PAIN IN BACK.BY PM THE PAIN HAD BECOME MUCH WORSE.VERY SORE ON AM OF 3-25-92.

INJ LEANING OVER BELT CONVEYOR SEPARATING OUT BAD ORE GOING TO CRUSHER,TWISTED LOW BACK.

INJURED WAS LIFTING BELT FRAME FROM FLOOR TO WALKING LEVEL TO CARRY TO SHOP WHEN HE FELT SHARP PAIN IN LOWER BACK.

INJ PUTTING DRILL STEEL ON STORAGE RACK WHEN ONE PIECE FELL HITTING MIDDLE FINGER RIGHT HAND.

INJURED WAS REARRANGING SOME CHUNKS OF ORE IN THE TRAM CAR WHEN A CHUNK ROLLED OVER PINCHING RT HAND BETWEEN THE CHUNK & TRAM CAR

INJ DESCENDING LADDERWAY,STOPPED,AN EMPL ABOVE STEPPED ON INJUREDS HEAD.

INJURED AND ANOTHER TRAMMERMAN WERE PUTTING A CAR BACK ONTO THE TRACK AT THE 500 LEVEL 19A RAMP, WHEN THE MINE CAR DUMP WHEEL STRUCK THE INJURED'S RIGHT ANKLE, CAUSING A LACERATION ABOUT 3 INC HES LONG.