Buscar en el registro

Miner was moving a haul truck wheel chock and felt pain in EE's left shoulder. EE missed no days of work but has now been put on restrictions from EE's Dr. that won't allow EE to perform EE's work duties and will be off work until further notice as of 1/20/2026.

Was working inside of crusher chute when a lodged piece of metal fell striking EE below EE's hardhat causing a cut.

Miner stated that a piece of angle iron fell off the steel rack and smashed fingertip between the rack support.

Miner was shoveling sand onto conveyor belt and felt pain in right shoulder and biceps.

Miner was installing V-belts on a motor pulley and EE's fingers got pinched between the sheave edge and the V-belt.

Miner was working on cone crusher retaining ring when EE's left ring finger got pinched between the retaining ring and the shaft.

Cut left index finger during maintenance. Hand was placed on gravity take up guide pole, 966 loader bucket that was supporting the counter-weight bled down hydraulic pressure causing the counter-weight to lower and finger got pinched by the guide pole sleeves.

Was working on a return-roller hanger bracket, when last bolt was removed the weight of belt caused the bracket to drop rapidly and broke EE's middle finger on right hand.

Was replacing a return roller on a conveyor, used a wooden board for leverage to lift belt and hurt EE's shoulder. Continued working regular duty but found out EE will need surgery.

Employee stated through the course of duties changing screens on a shaker deck on 5/22/2020 that employee's knee tightened up. Employee thought it would be fine, but 5-hours into the shift on 5/23/2020 employee reported the injury.

Manual Labor, shoveling, clean up. Miner has a left inguinal hernia.

Miner was shoveling material and strained abdomen.

Miner was engaging the manually operated locking pins to secure the bucket on a skid steer. When EE initially pushed on it the handle got stuck. EE applied more pressure when it broke free the handle pinching EE's finger, fracturing it.

Removing a gear component when a metal fragment struck miners left arm, causing a laceration and embedding in arm.

Miner was reinstalling a troughing roller when it fell striking left hand. Fractured left middle finger, laceration left middle finger.

Two miners were moving a bearing when one miner's fingers caught between the bearing and the stairs, causing crushing injuries to right middle and ring fingers and fracturing right middle finger.

While clearing jaw crusher a large rock shifted into miners leg and foot, causing contusions to leg and foot

Miner was changing parts on a crusher when a part started to fall. The miner tried to hold onto the part. The miner strained left shoulder.

Miner was brushing sand from a broken pipe. The miner cut finger by not using SLAM or using proper PPE. Due to accumulation of companies safety points program. The miner reached 12 points in a rolling 12 months.

Miner was Inspecting and cleaning the train load out area. Miner had pain in left knee was hard to walk, stand, or kneel that night at home.

Miner was shoveling material and aggravated mid and lower back.

Miner was installing a new roller finger was pinched between roller frame and conveyor frame. Miner received closed displaced fracture of left little finger.

Miner was changing rollers on a conveyor and felt something in his back. The next morning he really felt it. Miner has muscle strain/spasm in his back

The primary jaw had bridged over causing rocks to overflow the jaw. The injured miner was cleaning rocks off the deck and misjudged the distance between the rock in his hand and another rock. The result was a broken left index finger.

Employee fabricated a lifting device out of steel to lift a sheave for a v-belt drive assembly, upon lifting the sheave one of his weld broke and the sheave dropped a couple feet hitting the ground and rolling over his right foot, thus he incurred a bruised right foot needing a few days to recover.

EE was removing a return roller and when he rolled it out of the bracket he got his middle finger on his left hand slightly smashed between the roller and the roller bracket. We weren't even aware he went to the clinic until he turned paperwork in 3 weeks later.

Employee was the checking the gates on a bottom dump Haul Truck, when he instructed another employee to close the gates his thumb got caught between the cylinder and the ram.

WHILE OPERATING DOZER, IT OVERHEATED. EE FOR SOME REASON DECIDED TO LOOSEN AND TAKE OFF THE RADIATOR CAP WHILE THE ENGINE WAS STILL HOT.

WHILE EE AND ANOTHER EE WERE BUILDING A HOPPER THE 2 SIDE PANELS WERE BEING HELD BY TACK WELDS WHICH BROKE WHEN THE PANELS WERE BEING ALIGNED CAUSING ONE PANEL TO FALL ONTO EE.KICKERS WERE ALS O IN PLACE.

CARRYING A BAG OF POLYMER AND SLIPPED.