Avísenme cuando se presente un nuevo incidente de la MSHA en Redlands.
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 4,931 | 0 | 0 | 0.0 |
| 2025 Q3 | 4,864 | 0 | 0 | 0.0 |
| 2025 Q2 | 611 | 1 | 0 | 1636.7 |
| 2025 Q1 | 5,202 | 1 | 0 | 192.2 |
| 2024 Q4 | 5,452 | 0 | 0 | 0.0 |
| 2024 Q3 | 523 | 0 | 0 | 0.0 |
| 2024 Q2 | 9,219 | 0 | 0 | 0.0 |
| 2023 Q3 | 12,197 | 0 | 0 | 0.0 |
Miner was installing V-belts on a motor pulley and EE's fingers got pinched between the sheave edge and the V-belt.
Miner was hammering in a choker plate for material feed, missed the plate and struck EE's R-index finger. Miner was wearing leather gloves at the time and sustained a fracture to EE's fingertip.
Miner was operating a 777 haul truck and hit a pothole in the haul road causing an injury to lower back. Truck was empty at the time.
Miner has had an audiometric standard threshold shift in R-ear. Miner states they have been exposed to work noise for 41-years and has been exposed to gunfire in the past. Miner wears earplugs.
Miner was walking down a grade to bottom plant & slipped, causing injury to EE's left knee.
Stepping down from edge of VSI, they slipped and rolled R-ankle
Cut left index finger during maintenance. Hand was placed on gravity take up guide pole, 966 loader bucket that was supporting the counter-weight bled down hydraulic pressure causing the counter-weight to lower and finger got pinched by the guide pole sleeves.
Was replacing a return roller on a conveyor, used a wooden board for leverage to lift belt and hurt EE's shoulder. Continued working regular duty but found out EE will need surgery.
Miner was a hammering chisel wedge to separated a liner when the wedge released striking the miners left side of the nose. This caused a laceration requiring stitches.
A driver stepped out of a truck onto uneven ground and sprained their knee.
Miner was brushing sand from a broken pipe. The miner cut finger by not using SLAM or using proper PPE. Due to accumulation of companies safety points program. The miner reached 12 points in a rolling 12 months.
Walking down stairs between S3 & S4 stepped down wrong and rolled his right ankle.
Tipped water truck on side. Laceration on back required stitches.
Mobile Equipment Incident.
Jaw crusher plugged filling the surrounding area with material, EE & 2 workers removed the material they used a crane & sling operation because some of the damaged deck could be a trip hazard they removed 2 sections ee was standing with his back to 1 hole he then turned & lost his balance fell approx. 12' onto his side, ee had a bad cut over his right ear
EE was cleaning up the material that had spilled around the sand screws discharge collecting box with a shovel and in performing this task he slipped and lost his footing and fell thus cutting his right forearm with a 2.5 cm cut. He wasn't sure what actually cut his arm, he was released to come back to work from the clinic but he decided he needed a day of rest.
Employee was the checking the gates on a bottom dump Haul Truck, when he instructed another employee to close the gates his thumb got caught between the cylinder and the ram.
EE TURNED ON THE 7' BREAKER & IT TRIPPED THE MAIN BREAK SO HE SHUT OFF THE 7 ' BREAKER & RESET THE MAIN, THEN PROCEEDED BACK TO LOOK AT THE 7' STARTER & EVERYTHING LOOK OK SO HE WENT TO THE N EW BREAKER BOX, LIFTED LID TO LOOK INSIDE & AT THE SAME TIME A COWORKER TURNED THE MAIN BACK ON& THE BOX HE WAS LOOKING AT EXPLOSED
WHILE CHECKING FLUID LEVELS DURIGN PRETRIP HGE FELL FROM THE HAUL TRUCK SPRAINING HIS KNEE.