Buscar en el registro

As worker was climbing in to the flatbed of a truck ee felt a pop in left foot. EE continued to work and declined treatment at the time of injury. EE did not think it was too bad and thought it would get better. Pain gradually worsened over several days. On 6/11/17 ee was hurting bad and decided ee needed treatment.

Employee stated that the line on the capson head got too tight. When he went to take off the line it jumped and hit the palm of his left hand and jammed his wrist.

Employee stated that there were two possible causes. Either when he was installing a plate in a chute or when he was pushing a guard in place. Right side of ribcage sore.

EE was moving a shaft from skiff to the back of the pickup & slipped.

EE WAS ASSIGNED CLEANUP DUTIES ON SAND & GRAVEL PLANT. USING HAND SHOVEL. THE FOLLOWING DAY EE CALLED IN STATING HIS BACK ACHED AND WOULD NOT REPORT TO WORK. EE STATES"OVER USE OF BACK THROUGH OUT DAY" EE HAS SEEN DOCTOR.

EMPLOYEE STATE HE LIFTED BUKCETS OF GRAVEL SMAPLES WHILE RUNNING SIVE ANALYSIS, EMPLOYEE DID NOT REPORT INCIDENT ON 4-7-98, NEXT MORNING ON 4.8.98 EMPLOYEE WAS CHANGING INTO WORK CLOTHES IN LO CKER ROOM STRAINED LOWER BACK.

EMPLOYEE WAS ASSISTING IN HANDLING STEEL SIDE PLATES TO A TIER SCREEN (30" X 80" X 1/4" APPROX.), IN SHOP, ON WORK TABLE. EMPLOYEE INADVERTENTLY ALLOWED HIS MIDDLE FINGER TO GET BETWEEN PLATES WHILE MOVING PLATES.

EE WAS NOT SURE WHERE OR WHAT HE WAS DOING TO HURT HIS LOW BACK WHEN HE FIRST REPORTED INJURY. EE NOW STATES HE THINKS HE STRAINED LOW BACK WHILE MOVING STEEL BEAMS & LATES ON THE BARGE TIED U P AT DOCK.

EMP STATES HE STOOPED OVER TO PULL ON A CABLE STRUNG OVER AN OBJECT. THE CABLE HUNGUP. FELT SHARP PAIN IN BACK.

EMPLOYEE WAS WORKING ON A CONE CRUSHER AND GOT A PARTICLE IN HIS EYE. EMPLYEE DOES NOT KNOW HOW IT GOT IN HIS EYE.

EE WAS DOING MAINTENANCE WORK ON LEG WASHER CAUSE WASHER AND STRUCK HIS LEFT KNEE ON STEEL ANGLE IRON WHILE TRYING TO QUICKLY MOVE AWAY FROM SPRAYING WATER SKIN WAS NOT PUNCTURED. EE EXPERIENC ED A LOT OF PAIN SO HE WAS IMMEDIATELY TAKEN TO DR FOR E XRAY

EMPLOYEE WAS REMOVING LINER SEGMENTS FROM A GYRATORY CRUSHER FRAME, A STEEL CASTING SEGMENT FELL FROM CASTING AND STRUCK EMPLOYEE'S RIGHT FOOT. CRUSHER WAS A SPARE CRUSHER CASTING, IN MAINTENA NCE AREA FOR REPAIRS, NOT IN THE PLANT.

EE STATES HE SMASHED HIS FINGER WHILE INSTALLING V BELTS ON ELECTRIC MOTOR AND VIBRATING SCREEN PULLEY MANUALLY AND PUSHED TO HARD AND GOT FINGERS PINCHED.

EMPLOYEE REPORTS EXPERIENCING PAIN IN KNEES, DR.& EMPLOYEE HAVE CONCLUDED CAUSE IS FROM WORKING ON HIS KNEES, CROUCHING , AND CLIMBING WHILE PERFORMING MAINTENANCE DUTIES ON SAND & GRAVEL EQUIPMENT. MAINTENATNCE DUTIES INCLUDED WELDING

EMPLOYEE STATES HE WAS OPENING GRAVEL GATE TO ALLOW GRAVEL TO FEED ONTO A CONVEYOR. THE GATE STUCK THEN SPRUNG OPEN WITH THE HANDLE OF GATE STRIKING EMPLOYEE ON CHIN.

EMPLOYEE WAS DISCONNECTING TAG LINE ROM CLAM BUCKET LAYING ON BENCH PIN IN SHAKLS HUNG UP THEN ABENPTLY CAME LOOSE STRICKING EMPLOYEES FINGERS NOTE EMPLOYEE DID NOT REPORT INJURY OR GO TO DOC UNTIL 01-16-95

EE WORKS AS A HEAVY EQUIPMENT MECHANIC USING MANY DIFFERENT BODY POSITION IN THE PERFORMANCE OF HIS JOB. NO SPECIAL INCIDENT CAN BE IDENTIFIED AS THE CAUSE OF EE S KNEE SWELLING LATER THAT EVE NING.

EMPLOYEE STATES HE PICKED UP A BOX OF BRAKE LINING PADS IN THE TOOL ROOM OF RI DREDGE #9, HETURNED TO HIS LEFT AND HIS ANKLE COLLAPSED WITH EXTREME PAIN.

EE STATES HE DOES NOW KNOW HOW IT HAPPENED, FELT SAND SUBSTANCE IN EYE AFTER HE GOT HOME HE HAD IT CHECKED AT EMERGENCY RM.-- EVEIDENTLY TOOK A PIECE OF METAL OUT OF RT. EYE. WENT TO DR. MON. TO GET CHECKED, WAS OK. NO RUST RING, MISSED THAT MON. ONLY.

EMPLOYEE REPORTED/STATES HE WAS COMING DOWN FROMCAB FRONT WINDOW, SLIPPED AND STRUCK LEFT KNEE CAP ON FRONT OF "A" FRAME OF CRANE.

WORKER WAS PERFORMING LIGHT MAINTENANCE TASKS ON CRUSHING PLANT WORKER REPORT HE EVIDENTLY GOT A FOREIGN PIECE IN HIS EYE DURING SHIFT

I.NAME WAS WORK3NG ON LANDING CRAFT INSTALLING 4 IN WATER PIPE PIPE FELL THROUGH HOLE I.NAME CAUGHT THE WEIGHT SPRAINING HIS BACK

EMPLOYEE WAS HA3D CRANKING A GAS STARTING ENFINE TO A DIESEL ENGINE ON A CRANK TAKING A POOR POSITION EMPLOYEE OBTAINED PAIN IN LOWER BACK

CRANE SET CLAMSHELL BUCKET ON FRONT DECK OF FLOATING RIG EMPLOYEE UNHOOKED COLSING LINE WAS GETTING OFF BUCKET WHEN IT ROLLED AND STRUCK EMPLOYEE IN HARD HAT AND BACK OF HEAD HOLDING LIND RE REMAINED CONNECTED AND PREVENTED BUCKET FROM ROLLING FURTHER

EE WAS MOUNTING A 7 1/2 HP OUTBOARD MOTOR ON WORK SKIFT TO GO OUT TO DREDGE. WHILE EE WAS LIFTING THE OUTBOARD MOTOR HE STRAINED HIS BACK.