Buscar en el registro

A parent company EE was attempting to remove a ladder rack from company van on SMS property and felt a pull in right shoulder. Incident was reported same day but did not require a dr visit at the time. Injury has not improved since date of incident so EE had an MRI and will need surgery. EE is currently on a 15lb weight limit restriction.

EE was lifting 10 pound pipe when EE felt a pull and pop in right wrist on 1/13/25. At the time it required no medical attention. The company was made aware on 8/5/25 that EE requires surgery for injury.

While removing a length of frozen pipe. The pipe slipped and pinched EE's left thumb between the pipe and a block wall. X-Rays were taken and a hairline fracture was seen next to the knuckle. The miner was given a splint to wear to reduce movement.

Employee was doing general maintenance at the crusher, employee strained back installing flashing at cone crusher. Sought medical attention on own. Continued to work normal shifts. Was not reported until 12/29/20. Visited Dr. on 12/28/20. Could return to work on 12/30/20.

Employee was splicing a belt at dryer plant. Turned and hit left elbow on the belt guard, cutting elbow. Needed 5 stitches. All power was off at the plant during time of repair.

Flywheel struck employee in the chest causing him to strain his abdomen muscle. First ER visit showed no injuries from accident. A second visit to a Dr. showed a pulled muscles in the abdomen.

In shop fabricating a step. Moving a piece of expanded metal with hands cut left pointer finger.

Employee was lifting a propane tank to put in the back of a truck. He injured his lower back when lifting the tank.

Employee was climbing down ladder of 988G loader and a sliver of metal from ladder rail entered his hand.

Employee mashed left foot on bag machine palletizer. A machine part fell on his foot (left).

Employee injured left hand while pushing rods into rod mill.

Employee was washing the floor, pulling a hose around. He hurt his back in the process.

Employee was putting a liner in the mill. A pin that holds the liner broke and liner fell on his left hand's ring finger. Weight of liner mashed his finger.

EE WAS PUTTING LINERS IN THE ROD MILL AND GOT SAND INTO EYES. INJURY WAS NOT REPORTED BY EE UNTIL 02/16/05. EE DID NOT START MISSING TIME UNTIL 03/01/05. EE WENT TO DOCTOR AND DOCTOR FOUND OBJECT IN EYE

WHILE EMPLOYEE WAS USING DINGY TO REMOVE SPILLAGE OF SAND AT THE SILOS AND SHOVELING SAND, HE MOVED A WATER HOSE AND INJURED HIS LOWER BACK.

EMPLOYEE WAS SHOVELING SAND AND PULLED HIP. EE NOTIFIED COMPANY OF ACCIDENT ON 4/01/04.

WHILE INSTALLING AN ELBOW, PULLED MUSCLE IN GROIN AREA.

EE CRAWLED UNDER SCALPING SCREEN TO TIGHTEN BELTWHEN HE DID THIS HE FELT A STING IN HIS BACK

THE EE BENT OVER, PICKING UP BOXES FILLED WITH BAGS THAT HAD TURNED OVER. INJURED BACK WHILE BENT OVER PICKING UP THE BOXES.

EMPLOYEE WAS INSERTING GLASS PIPETTE INTO PIPETTE PUMP AND IT SHATTERED CUTTING FINGER.

HE WAS USING A FIRE HOSE TO CLEAN UNDER THE JAW CRUSHED HE RAISED UP AND HIT HIS BACK ON GUARD ULLEY FOR A BELT.

HPICKED UP PUMP MOTRO BASE AND HURT HIS BACK.

HE WAS CARRYING A 5 GALLON JUG OF OIL & FLASHLIGHT TO THE ROD MILL TUBE TANK HE NOTICED AN OBJECT IN THE MIDDLE OF THE FLOOR INSTEAD OF SETTING ONE DOWN HE CHOOSE TO USE HIS FOOT TO MOVE THE O BJECT WITH THE SIDE OF HIS FOOT HE PUSHED IT TO THE SIDE CAUSING THE INJURY

CHANGING SCREENS ON SHAKER & PULLED CHEST MUSCLES

EMPLOYEE WAS USING METLA PLATE TO BUILD DRYER PLANT DUCTING, HE LIFTE DPALTES HWEN PAIN WAS FELT.

EMPLOYEE WAS DOING REGULAR CLEAN UP, EMPTIED TRASH CAN AND STRAINED BACK.

EMPLOYEE WAS GETTING DRYER READY FOR OPERATION, HE WAS CLEANING SHAKER SCREENS. HE HAD CLIMBED ON TOP OF SHAKER SCREEN T REMOVED ROCKS FROM CHUTE. WHEN EMPLOYEE BEGAN TO CLIMB DOWN FROM THE SHAKER HE FELT SOMETHING LIKE A SHARP PAIN IN HIS LEFT SIDE. WHEN HE WAS DOWNA BLUGE AND APPEARED ON HIS LEFT SIDE.

EE WAS HELPING MOVE ROD CONVEYOR AT WASH PLANT AND WHILE HE WAS LIFTING THE ROD CONVEYOR HE FELT PAIN IN HIS BACK.

EMPLOYEE WAS PULLING ON ELEVATOR BELT AT THE DRYER TO REMOVE IT FROM THE SILO AND HE FELT PAIN IN THE LOWER BACK.

EMPLOYEE WAS LIFTING A COUNTERWEIGHT OFF THE VIBRATOR SHAKER AND FELT PAIN IN HIS BACK. HE FINISHED WORK ON 8-31-92 WENT TO THE DR AND RETURNED TO WORK ON 9-1-92. HE HAS NOW MISSED WORK FROM 9-14-92 UNTIL 9-21-92.

INJURED AND ANOTHER EMPLOYEE WERE PULLING PAN FROM UNDER LOADER AND INJURED BACK WENT OUT.EMPLOYEE DID NOT GO TO THE DOCTOR.

EMPLOYEE WAS PULLING A CONVEYOR BELT AT WASH PLANT AND HE WAS STANDING WITH CONVEYOR BELT BETWEEN HIS FEET AND HE PULLED UP ON IT AND HURT HIS BACK. EMPLOYEE HAS NOT MISSED ANY WORK UP TO THIS DATE. HOWEVER HE HAS A DOCTORS APPOINTMENT ON 9/21/90 FOR FURTHER TESTING. IF HE MISSES WORK, WE WILL SUBMITTED AN AMENDED REPORT.

EMPLOYEE STATES HE WAS CHECKING COOLER EXHAUST STACK HE CLIMBED LADDER AND WENT INTO THE STACK AND WHEN HE RETURNED TO THE OUTSIDE HE HAD A HERNIA OUT ON LEFT SIDE.

EMPLOYEE WENT INSIDE THE DRYER DRUM TO CLEAN THE FUEL NOZZEL AND MADE A LONG STEP TO GET BACK ONTO THE CATWALK AND PULLED HIMSELF HERNIA