Buscar en el registro

Employee pinched his finger between a sledgehammer handle and a metal bulk prill bin, resulting in a fracture to his left ring finger.

Employee was removing a crib block from underneath a D10 dozer track after the track had been bolted together. Two of the track pads came together, severing the tip of the employee's right little finger just below the fingernail.

EE WAS PULLING FUEL HOSE TO TRUCK TANK, FELT PAIN IN LOWER BACK. DID NOT REPORT UNTIL 11/08/2004, TREATED BY DR, GIVEN RX AND ONE WEEK RESTRICTED DUTY.

Employee bent over to pick up a piece of nylon rope and experienced pain in his lower back. He was diagnosed with a lumbar strain.

Employee was struck by a flying piece of metal from a dozer track which was being unloaded. He suffered a laceration to his stomach and arm.

EMPLOYEE WAS ADJUSTING A CHOKER ON X-BRACING & FELT PAIN IN THE LEFT SHOULDER, WHEN HE REACHED UP TO ADJUST IT.

EMPLOYEE WAS STRUCK ON THE LEFT INDEX FINGER BY BOLT/NUT FROM CUTTING EDGE ON 575 KOMATSU DOZER. *NOTE: EMPLOYEE DID NOT VISIT DOCTOR UNTIL 1-16-04. MANAGEMENT WAS NOT NOTIFIED OF THE DIAGNOSI S UNTIL 1-17-04. MEDICAL RECORDS WERE NOT OBTAINED UNTIL 1-21-04.

LAB TECHNICAN WAS CRUSHING COAL SAMPLE-LIFTING TRASH CAN OF COAL TO HOPPER OF CRUSHER-HE APPARENTLY STRAINED ABDOMINAL MUSCLES WHILEWORKING-EE DID NOT SAY ANYTHING TO CO-WORKERS OR REPORT TO S UPERVISOR HE WAS HURT-CALLED IN THE NEXT DAY AND REPORTED HE WOULD BE OFF 2 WEEKS.

AFTER MAKING DELIVERY, DRIVER UNCOVERED 3"HOSE FROM STORAGE TANK. HE FAILED TO RELEAVE PRESSURE BY UNCOUPLING ONE SIDE AT A TIME, AS TRAINED 2 WEEKS PRIOR. ONCE UNCOUPLED THE HOSE FLEW BACK STRIKING HIM IN THE UPPER LIP CAUSING A DEEP LACERATION. HE SOUGHT IMMEDIATE TREATMENT BY PRIVATE TRANSPORTATION.

EE DROPPED DRILL BIT SUB SECTION, PINCHING LT. INDEX FINGER.

EMPLOYEE JAMMED HIS HEAD INTO AN AIR INTAKE TUBE, STRAINING HIS NECK. EE DID NOT START MISSING WORK UNTIL 9-8-03.

EE WAS STRUCK IN THE R THIGH BY A FRAGMENT OF METAL.

REPAIRING/REMOVING SHIFTING DEVICE FROM TRUCK, STRAINED (R) SHOULDER.

EE WAS LIFTING A PIECE OF METAL WHEN IT SLIPPED & STRUCK HIS FINGER

EMPLOYEE STRAINED LOWER BACK WHILE REMOVING METAL DOOR AT COAL FEEDER. *NOTE - EMPLOYEE DID NOT MISS WORK UNTIL 3-10-03.

EE SUSTAINED AN INJURY TO HIS LEFT EYE. A PIECE OF BRASS ENTERED HIS EYE CAUSING AN ABRASION.

EMPLOYEE FELT PAIN IN HIS LEFT GROIN AREA WHILE TYING A SHOT TOGETHER. NOTE: HE DIDN'T MISS WORK UNTIL 1/30/03.

LIFTING SHEET METAL HE TURNED LEFT & FELT PAIN IN LOWER BACK.

EE HIT STRIKER PLATE ON TANKER TRUCK. RUST MATERIAL WAS DISLODGED FROM BETWEEN PLATE AND TANKER BODY AND LODGED IN EE EYE. EE TREATED AT LOCAL CLINIC AND RETURNED TO WORK SAME DAY.

EMPLOYEE STATED THAT HE FELT SOMETHING "PULL" WHILE MOUNTING THE ENDLOADER. EE DID NOT REPORT THE INJURY UNTIL 8-29-02.

EE WAS TAKING A FITTING OFF AN AIR HOSE & STRAINED HIS SHOULDER.

EE WAS ADJUSTING TRUCK SEAT & THE BACK OF THE SEAT BUMPED HIS ELBOW. EE DID NOT START MISSING WORK UNTIL 4/15/02.

EE WAS BOARDING AN ENDLOADER. HE MAINTAINED 3 POINTS OF CONTACT. DID NOT SLIP. EXPERIENCE PAIN INHIS RIGHT LOWER BACK. I HAVE CLASSIFIED THIS INCIDENT AS AN ILLNESS, DUE TO NO TRAUMATIC EVENT.

EE STEPPED OFF A D10N DOZER AND EXPERIENCED PAIN IN HIS BACK AND FELT NAUSEATED NO TRAMATIC EVENT.

EE WAS LIFTING A 8 LB. BUCKET OF BIT GREASE AND EXPERIENCED A BURNING SENSATION IN HIS GROIN AREA. MANAGEMENT WAS INFORMED ON 1/28/02 THAT THIS INJURY RESULTED IN A HERNIA AND EE WILL START MI SSING WORK 1/29/02.

EMPLOYEE WAS REMOVING A WATER BOTTLE FROM INSIDE THE DEFLECTOR HOOD OF CAB AC. DURING THE PROCESS, HIS FINGER CONTACTED THE SQUIRREL CAGE FAN, RESULTING IN INJURY.

EE WAS WALKING IN THE MUD WHEN HE TURNED AND HISFOOT STUCK IN THE MUD RESULTING IN A TWISTING MOTION TO HIS RIGHT KNEE.

EE WAS PLACING SOME CLOTHING IN CAB OF HIS SERVICE TRUCK WHEN HE EXPERIENCED PAIN IN HIS BACK AND LEGS. THIS SHOULD BE RECORDED AS AN ILLNESS ASTHERE IS NO TRAUMA OR MECHANISM OF INJURY.

EE WAS BENDING OVER HIS TOOL CRIB & LIFTING A TOOL BOX. THIS RESULTED IN A STRAINED BACK.

EE WAS REPAIRING ON A DRILL WHEN THE BITY SU-SHAFT FELL OVER, STRIKING HIS LEG.

EMPLOYEE WAS SITTING IN THE CAB OF HIS PARKED TRUCK & LEANED OVER TO MOVE HIS LUNCH BUCKET. AS HE WAS IN PROCESS O F REACHING TOWARDS HIS LUNCH BUCKET, HE FELT A PAIN IN THE MID-SECTION OF HI S BACK. NO TRAUMA WAS INVOLVED; THIS IS AN OCCUPATIONAL ILLNESS.

EE WAS IN PROCESS OF MOVING DRAGLINE POWER CABLE. HE WAS ATTEMPTING TO ATTACH A NYLON STRAP (ATTACHED TO THE POWER CABLE) TO A DOZER BLADE. IN THE PROCESS OF DOING THIS, HE STRAINED HIS LOWER BACK. STARTED MISSING WORK ON 4/28/00.

WHILE HELPING FELLOW EE LOAD A BELT GUARD INTO BED OF SERVICE TRUCK, EE DROPPED HIS END OF THE GUARD, PINCHING HIS FINGER BETWEEN GUARD & METAL TAILGATE OF SERVICE TRUCK.

EE WAS IN PROCESS OF OPENING HIS TOOLBOX WHEN HE FELT PAIN IN HIS LOWER BACK.

WHILE LOADING SUPPLIES ONTO A VEHICLE THIS EE WAS PLACING A BELT SPLICER ONTO THE VEHICLE WHEN THE SPLICER CAUGHT ON HIS COVERALLS & DROPPPED HE REACTED BY ATTEMPTING TO CATCH IT. THE SPLICE SMASHED HIS FINGER RESULTING IN 12 STITCHES. HE RETUREND TO WORK ON HIS NEXT SCHEDULED SHIFT

EE WAS LIFTING A 3 FOOT CRIB BLOCK, TWISTED AND STRAINED HIS BACK STARTED MISSING WORK 9-15-99.

EMPLOYEE WAS ATTEMPTING TO LIFT AND PULL A ROCK.WHEN THE ROCK SHIFTED POSITION, IT PINCHED HIS LEFT HAND.

EMPLOYEE WAS LIFTING A PIECE OF PIPE WHEN HE STRAINED HIS BACK. HE CONTINUED TO WORK HIS REGULAR SHIFT UNTIL 9-15-99.

EE WAS REMOVING A 15 KV POWER CABLE FROM A JUNCTION BOX AND STRAINED HIS BACK. DID NOT START MISSING WORK UNTIL 8-12-99.

EE STATED THAT HE FELT PAIN IN HIS LOWER BACK WHILE PULLING A KINK OUT OF THE WATERLINE GOING TO THE CONTINUOUS MINER.

EE STATED THAT HE FELT PAIN IN HIS LOWER BACK WHILE CARRYING A PIECE OF METAL PLATING UP FLIGHT OF STAIRS. BEGAN MISSING WORK ON 7-16-99.

EE ALLEGEDLY BUMPED HIS ELBOW, REULTING IN SWELLING. THE INJURY WAS NOT REPORTED UNTIL 6-8-99. AFTER INVESTIGATIN, IT BEEN DETERMINE THAT THIS INJURY MAY NOT HAVE OCCURRED ON MINE PROPERT. EE STATES THAT IT DID & WE ARE SUBMITTING THIS REPORT.

EE WAS REAPRING ON THE 1570 DRAGLINE WHEN HE BECAME PINCHED BETWEEN A SUSPENDED SWING SHAFT AND THE HANDRAILS AROUND THE #2 SWING CASE MOTOR.

EMPLOYEE THINKS HE MAY HAVE HURT HIS BACK WHILE PICKING UP A COL SAMPLE BAG,(APPROX. 50LB.). HE FELT A TWINGE IN HIS BACK SOMETIME SATURDAY AFTERNOON 04/17/99. IT DEVELOPED INTO SORENESS BY MO NDAY MORNING ON 04/19/99. HE BEGAN MISSING WORK ON 04/19/99.

EMPLOYEE WAS ROLLING PUMP SHEAVE WHEEL AWAY FROM WALKWAY. THE WHEEL TILTED SIDEWAYS RUBBING EMPLOYEE'S FINGER ALONG A BOLT THAT WAS PROTRUDING FROM THE PUMP GUARD.

TRYING TO REPLACE BOTTOM RATIATOR HOSE ON D7 DOZER WHEN EE FELT PAIN IN HIS L FOREARM

EE WAS MANUALLY HANDLING A 10 5/8" DRILL BIT & STRAINED HIS LOWER BACK.

WHILE INSTALLING CRUSHER MOTOR BELT, EMPLOYEE CAUGHT THE TIP OF HIS LEFT MIDDLE FINGER IN THE UPPER SHEAVE WHEEL.

THE SECURITY OFFICER WAS OPENING GATE AND THE BOLT SLIPPED OUT AND HIT THE OFFICER IN HIS RIGHT EYE.

EMPLOYEE WAS BOARDING AN 830 WABCO TRUCK. AS HE WAS CLUMBING UP LADDER, TO THE OPERATORS CAB, HE BUMPED HIS KNEE AGAINST A LADDER RUNG.