Buscar en el registro

Trying to repair an overhead door that would not close, pushed door back up, saw hung-up cable, reached to free cable when it coiled up, coming in contact with his rt. index finger.

2 mine mechanics were in the processing of removing a filter housing from on board air compressor on Dragline #79. EE was removing a nut & in the process got his finger in the area of a pulley that was rotating. When pulley made contact he jerked his hand back resulting in laceration. The drive belt had been removed but pulley moved due to air. Hand jerk caused injury.

The dragline operator was moving a 5 gal bottle of water from a pickup to the dragline shoe. As he raised the bottle to the shoe, he felt a pop in his right shoulder. This was treated as a first aid case until his visit with an orthopedic doctor on 12/30/2005. The orthopedic physician restricted his work making the case MSHA reportable.

HEO was dismounting a Hitachi backhoe when her left ring finger got caught in the grating adjacent to the grab bar resulting in a fracture.

The mechanic was changing hoist cable on a BE 2570 dragline. He extended his right arm up and grabbed the ladder rail while stepping onto the 2nd rung of the ladder to exit the Drag Drum pit. As his body twisted he felt and heard a pop in his right shoulder accompanied by sharp pain. He had shoulder surgery on September 30th and was restricted by medical on 10/3/05.

On April 27, 2005 Employee was manually lifting rebar, which strained his back. Doctor visit allowed him to return to work without any restrictions. His back continued to hurt the following days. On May 4th late in the work day he returned to doctor who then placed him on a restricted work duty beginning on the work day of May 5th. Follow up doctor visit on May 10th.

Service employee was removing axle out of scraper pan tire and it slipped and hit his thumb.

The Heavy Equipment Operator (HEO) was attempting to lift a dragline trail cable off the hooks on Dragline 79 when he felt a sharp pain in his right bicep.

AS WORKER WAS REMOVING TOOL BUCKET FROM THE BED AREA OF A PICKUP TRUCK LOWER BACK PAIN WAS EXPERIENCED.

EMPLOYEE WAS GREASING DRIVE SHAFT ON VOLVO END DUMP. AFTER FINISHING HE STOOD UP AFTER BEING BENT OVER AND THEN NOTIFIED HIS SHOULDER WAS HURTING.

WHILE TROUBLESHOOTING/REPAIRING THE CAB VENTILATION SYSTEM FAN IN A FRONT END LOADER, THE WORKERSNEEZED CAUSING A SPONTANEOUS REFLEX MOTION OF HIS LEFT HAND INTO THE FAN ASSEMBLY RESULTING IN A CUT/FRACTURE TO HIS LEFT RING FINGER.

WHILE LIFTING A WHEEL CHOCK WEIGHING ~35LB, THE WORKER FELT A SHARP PAIN IN LEFT TESTICLE.

EMPLOYEE LIFTED A SECTION OF PIPE APPROX 18" LONG AND 8" IN DIAMETER AND WAS GOING TO TOSS THE SECTION OF PIPE OVER THE BOOM CORD (APPROX 4 FT OFF THE GROUND) HE MISGAUGED THE DISTANCE AND CAU GHT HIS HAND BETWEEN THE PIPE SECTION AND BOOM CORD.

THE EMPLOYEE AND COWORKER WERE IN THE PROCESS OF ATTACHING A SLING AROUND A PUMP DISCHARGE LINE WHILE ON A FLOATING BARGE. THE BARGE TILTED CAUSING THE WORKER TO STRAIGHTEN FROM LEANING AS A R EACTIVE REFLEX. PAIN WAS FELT IN THE LOWER BACK.

AS THE EMPLOYEE WAS PULLING HIMSELF UP ON THE TRACK OF THE DOZER BY GRABBING THE MOUNTING BAR, HE FELT PAIN IN THE RIGHT SHOULDER.

WHILE ATTEMPTING TO RESOCKET A DRAGLINE DUMP WIRE ROPE CABLE THE CABLE SLIPPED CAUSING A PINCH POINT FOR THE EMPLOYEE'S RIGHT HAND INDEX & MIDDLE FINGER BETWEEN THE CLAMP & WEDGE. TWO STICHES TO THE MIDDLE FINGER WERE REQUIRED.

INJURED HAD BEEN WORKING ON GENERATOR CHANGE OUTON DRAGLINE 80. HE RETURNED TO SHOP, TAKING TOOLBUCKET OUT OF TRUCK & CARRYING IT INTO SHOP, PLACING IT IN HIS LOCKER. HAD TO LIFT BUCKET ABOUT 3 1/2' TO SHELF IN LOCKER. FELT A LITTLE PULL INSHOULDER. WOKE UP ABOUT 3:OO AM WITH SEVERE PAININ RIGHT SHOULDER.

EMPLOYEE WAS ASSISTING A COWORKER REMOVE A WIRE ROPE SLING ATTACHED TO A GREASE SERVICE TRUCK THAT HAD BEEN USED TO PULL THE TRUCK FROM MUD. WHILE BENDING AND REACHING, THE EMPLOYEE EXPERIENCE D A LOWER BACK STRAIN. THE SLING WAS 1 1/2" IN DIAMETER WEIGHING APPROX 100 LBS.

EE WAS MOVING BY HAND A 12"X8" SCHEDULE 40 PIECEOF PIPE FROM GRD LOCATION CONTAINING SEVERAL OTHER PIECES OF PIPE. THE PIPE ROLLED ON A PIECEOF ANGLE IRON CATCHING THE GLOVED LEFT HAND IN A PINCH POINT AGAINST AN ADJACENT PIPE RESULTING IN BRUISES

EE WAS CLEANING DIRT FROM CHUTES WHERE DRAG ROPE RUN THROUGH THE MACHINE HOUSE. THE CHUTE IS 43 IN. HIGH BY 40 IN WIDE. EE HAD TO MOVE DIRT 5 FTDOWN THE CHUTE FROM A KNEELING OR SQUATTING POSI TION. WHILE MOVING FROM ONE CHUTE TO ANOTHER HE FELT BURNING IN LEFT THIGH. THIS WAS TREATED & HE WAS RELEASED. CONTINUED TO HAVE NUMBNESS. DR. PRESCRIBED RX & BACK BRACE MAKING THIS REPORTAB

EE WAS ASSISTING MECHANIC WITH INSTALLING A HITCH PIN. THE EE PICKED UP A HITCH FROM THE STORAGE AREA AND PLEASED IT ON A TRUCK FOR TRANSPORT. WHILE PLACING THE HITCH ON THE TRUCK THE EMPLOYEE 'S FINGER WAS CAUGHT BETWEEN THE HITCH PIN AND TAILGATE SUPPORT. THIS CAUSED A LACERATION OF THE LEFT INDEX FINGER.

CREW WAS REMOVING WIPER BLADE ASSEMBLY FROM CONVEYER. AS THE ASSEMBLY WAS BEING GUIDED THROUGH INSPECTION DOOR IT FELL APART DROPPING AND STRIKING THE WORKER ON THE LEFT MIDDLE FINGER AGAINST THE INSPECTION DOOR FRAME. SET SCREWS HOLDING THE ASSEMBLY TOGETHER HAD BEEN LOOSENED TO EXPEDITE REMOVAL.

EE WAS USING HIS RIGHT FOOT TO MOVE A BLOCK OUT OF THE WAY. A PRYBAR WITH A SHARPENED POINT WAS ON THE BLOCK. EE DID NOT SEE THE PRYBAR WHICH PUNCTURE HIS RIGHT ANKLE AS THE BLOCK MOVED. AFTER COMPLETING THE WORK SHIFT THE EE WENT TO A LOCAL HOSPITAL ER WHERE HE WAS GIVEN A PRESCRIPTION FOR PAIN.

LIFTING METAL PLATE INTO POSITION, USED LIMPROPER POSITION.

MATERIAL WILL BE USED TO STOP BELLY PAN FROM FALLING PAST THE SAFETY CHAIN FOR INSPECTION OF EXCESSIVE MATERIALS BUILD UP. THIS WILL ALLOW MECHANICS TO CLEAN EXCESSIVE MATERIAL, INSPECT THE SA FETY CHAIN CONFIGURATION AND SAFETY LOWER THE BELLY PAN FOR MAINTENANCE.

2 EE'S WERE PICKING UP AND PLACING ROCKS INTO A TRACTOR BUCKET, WHEN ONE OF THE EE'S GOT THEIR HAND CAUGHT BETWEEN THE ROCKS. INJURED EE WAS TAKEN TO THE HOSPITAL WHERE HE RECEIVED PAIN MEDICA TION AND A PRESCRIPTION.

EE WAS INSTALLY EVAPORATOR IN A/C BOX LOCATED UNDER THE DASH OF A 213 CAB. EE HAD TO POSITION HIMSELF AWKWARDLY IN ORDER TO REACH THE AREA UNDER THE DASH. AROUNC 1400 WHEN EE FINISHED, HE NOTI CED A PAIN IN THE NECK REGION DUE TO THE REACHING AND AWKWARD POSITION.

EMPLOYEE WAS BORING HOLES ON DOZER STABILIZER BAR, METAL SHAVING WERE BEGINNING TO BALL UP. EMPLOYEE STOPPED THE BORING BAR, REACHED IN TO PULL SHAVING OUT OF THE WAY. WHEN EMPLOYEE STARTED TO PULL ON SHAVING HUNG TO METAL AND CUT EMPLOYEE'SGLOVES AND RIGHT RING FINGER.

DRILL PIPE FELL FROM RACK HITTING EMPLOYEE IN MOUTH.

ILNJURED EE WAS DESCENDING STEPS AT FUEL ISLAND. HE STEPPED DOWN ON CONCRETE WITH RIGHT FOOT & FELT PAIN. INJURY WA AGGRAVTION TO PRE-EXISTING CONDITION-BONE CHIP. EE RETURNED TO FULL DUTY 2 D AYS LATER.

INJURED EE WAS DISMOUNTING DOZER AT END OF SHIFT. WHILE STEPPING OUT OF CAB, SHE TURNED TO USE GRABRAIL. INSTEAD EE'S HAND CAME IN CONTACT WITH THE EXHAUST STACK CAUSING A BURN TO THE HAND WHI CH RESULTED IN SECOND DEGREE BURNS.

EMPLOYEE WAS DISMOUNTING MOTOR GRADER WHEN HE EXPERIENCED PAIN IN THE RIGHT KNEE. EMPLOYEE COMPLETED SHIFT ON APRIL 4, 1998, EMPLOYEE SOUGHT MEDICAL ATTENTION AND WAS PLACED ON MEDICAL RESTRIC TIONS ON APRIL 6, 1998, WHICH PROHIBITED HIM FROM BEING ABLE TO CONDUCT ALL OF HIS NORMAL DUTIES.

EE'S WERE MOVING 6" DISCHARGE LINE (APPROX 300'). INJURED WAS GUIDING THE LINE AROUND A CURVE USING A ROD DRIVEN INTO THE GROUND. INJURED WAS STANDING ON THE INSIDE RADIUS OF THE LINE WHEN THE ROD BENT ALLOWING THE LINE TO STRIKE HIS LEFT KNEE. THE RESULTING DIAGNOSIS REVEALED A SPRAIN TO THE LEFT KNEE. PLACED ON RESTRICTED DUTY.

EMPLOYEE REPORTED ON 01-13-98 THAT AN INJURY HAD OCCURRED ON 01-07-98 WHEN HE WAS ADDING DISCHARGE LINE TO A PUMP. THE EMPLOYEE WAS PULLING ON THE DISCHARGE LINE IN A MUDDY AREA WHEN HE EXPERI ENCED A BURNING SENSATION IN THE RIGHT KNEE. ORIGINAL LIMITATIONS DID NOT PROHIBIT THE EMPLOYEE FROM PERFORMING ALL JOB DUTIES. HIS PERSONAL PHYSICIAN CHANGED THE RESTRICTIONS AT A LATER DATE

EMPLOYEE WAS COMPLETING SHIFT. AS HE ENTERED THE TRUCK, HE STRUCK HIS HEAD ON THE DOOR FRAME. THE SEAT HAD BEEN PULLED FORWARD BY THE PRVIOUS DRIVER. EMPLOYEE WAS WEARING HIS PROPER PPE INCL UDING HIS HARD HAT. THE EMPLOYEE IS OVER 6' TALL WITHA PRE-EXISTING NECK INJURY WHICH HAD REQUIRED FUSING C5 ANC C6 SPINE. AWAITING A MRI.

INJURED WAS LIFTING AN ACCESS DOOR TO GAIN ENTRY INTO DRAGLINE 79 RIGHT HAND CAB AIR CONDITIIONING COMPARTMENT. INJURYY WA NOT REPORTED BY EMPLOYEE UNTIL 10-20-97. CLASSIFIED AS RESTRICTED W ORK CASE UPON DETERMINIATION BY DR THAT BACK MUSCLES HAD BEEN STRAINED.

INJURED STOOPED OVER TO MOVE TOOL BOX (21 IN. LONG BY 9 IN. HIGH BY 9 IN. WIDE WEIGHING 100 LBS.) OUT OF THE WAY OF A HAUL TRUCK DIFFERENTIAL SHIPPING STAND. INJURED GRABBED THE TOOL BOX BY TH E SIDE HANDLES AND SLID IT ABOUT 2-3 FT. AFTER STANDING UP HE EXPERIENCED PAIN IN HIS GROIN AREA. THE PAIN WAS CONFIRMED BY HIS DR. TO BE CAUSED BY A RUPTURED LUMBAR DISC AND RESTRICTED TO BE

INJURED NOTICED IRRITATION IN LEFT EYE ON 3-17-97. ON SITE MEDICAL FACILITY REQUIRED REMOVAL OF IMBEDDED FOREIGN OBJECT. EE CONTINUED ASSIGNMENT AFTER TREATMENT.

MECHANIC WAS ASSIGNED JOB OF REPLACING BEARINS ON CRUSHER BREAKER ROLLER SHAFT. TO ENSURE INSTALLATION OF BEARING, MECHANIC USED HIS HANDS TO PUSH. AS HE PUSHED, HIS HAND SLIPPED BEHIND BEAR ING RETAINER. THE MOMENTUM CAUSED THE RETAINEER TO SLIP OFF THE BEARING MOUNT INTO THE BREAKER ROLLER. THE LEFT MIDDLE FIGNER WAS COMPRESSED BETWEEN BREAKER AND RETAINER. COMPANY-PROVIDED

LOADING SUCTION LINE ON DIESEL BARGE. EE'S HAND SLIPPED, CAUSING ELBOW TO STRIKE INJURED EE IN THE MOUTH. INJURED EE RECEIVED LACERATION TO THE GUM, RESULTING IN TWO SUTURES.

EMP REMOVED HARD HAT TO WELD. WHEN FINISHED PUT HARD HAT BACK ON AND DEBRIS INSIDE HAT FELL DOWNINTO HIS EYE.

EMP WAS SHOVELING COAL AT FLIGHT 10 CONVEYOR. HAD SHOVELED AT THIS LOCATION FOR A PERIOD OF TIMESTOPPED ACTIVITY AND HAD DIFFICULTY IN STANDING UP. AFTER INVESTIGATION, EMP STATED THAT 3 WEEKS PRIOR HE HAD STRAINED HIS BACK WHILE OPERATING SKID STEER LOADER. STRAIN WAS NOT REPORTED. EMP IS ON RESTRICTED WORK.

EMPLOYEE WAS CLEANING GREASE ON DRAGLINE. THE CLEANER THAT WAS BEING USED CAUSED A BURNING (IRRITATION) TO THE EMPLOYEE'S HANDS. P.P.E. WAS PROVIDED BUT EMPLOYEE DID NOT WEAR AT ALL TIMES. EMP LOYEE CONTINUED TO REMOVE GLOVES AFTER DRY IRRITATION STARTED.

EMPLOYEE CUT HAND WHILE REMOVING BRASS BUSHING (LOWER) FROM BOOM POINT BOX. EMPLOYEE REACHED UP TO PUSH ON BOTTOM OF FLANGE TO MAKE SURE IT WAS LOOSE. WHEN EMPLOYEE PUSHED UP ON THE FLANGE, HS HAND SLIPPED AROUND THE BUSHING AND HIS HAND WAS CUT ON THE SHARP EDGE OF THE BUSHING.

EMPLOYEE WAS CLEANING OIL IN TIGHT QUARTERS OF DRAGLINE. AS HE ROSE TO EXIT, HE STRUCK METAL SLAG FROM CUTTING/BURNING OPERATION DURING DEMOLITION.

OPERATOR WAS DISMOUNTING DOZER, WHEN E STEPPED OUT FO CAB, HE TURNE DAROUND BRUSIHIN AGAINST STACK ON MUFFLER. EMPLOYEE SUFFERED AN APPROX 2 IN 2 SECTOND DEGREE BURN TO THIS LEFT ELBOW REUQIR ING DIALY APPLICATION OF MEDICATIN AND CLEAN DRESSINGS. INJURED DID NOT REPORT THE INJUR UTNIL THE FOLLOWING SHIFT.

PICKED UP 50 LB BAG SACK AND PULLED LOWER MUSCLE.

EE WAS DISASSEMBLING BORING BAR, WHEN BAR SWUNG OUT AND PINCHED RT RING FINGER, 4TH DIGIT, AGAINST WALL. WOUND REQUIRED 9 STITCHES.

CLEANING EQUIPMENT ON DRAGLINE. GEAR CASE COVER WAS BEING LIFTED TO INSTALL BLOCKING. AS MATERIAL WAS LIFTED, JIB CAME OFF OF IT28F TRACTOR STRIKING GEAR CASE COVER, HIT GROUND, BOUNCED STRIKI NG EMPLOYEE.

EMPLOYEE WAS WORKING IN MAINTENANCE SHOP ON A BRAKE JOB. EMPLOYEE REACHED FOR SOME .003 IN. THICK SHIMS ON THE WORK TABLE WHEN A FLASH OF LIGHTENING OCCURRED CAUSING EMPLOYEE TO JUMP BACKWARD CATCHING SHIMS ON A VICE ON THE WORK TABLE CUTTING FINGER.