Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
The injured employee was assisting with dragging a scrap truck frame when EE reached under the front bumper area to guide the Dyneema rope. A sharp metal shard protruding from the underside of the bumper contacted EE's right forearm.
Employee was carrying a box of detonators while distributing them on blast pattern when they stepped into a low spot in the ground, employee felt discomfort in their abdomen. Employee was diagnosed with a hernia on 1-29-2026 making this a reportable incident.
On 06/12/2025 employee reported that a coworker kicked the back of the front seat from the back seat of a quad cab pickup on 06/11/2025. On August 4th the employee was treated at an urgent care facility and released with restrictions.
Mechanic was attempting to install a hydraulic tank on a rubber tired dozer. The tank fell and struck the mechanic.
IE was removing #2 belly pan. IE planned to rattle hinge bolt with impact to get the pan to hinge downward. Bolt threaded out and allowed belly pan to move. Cable supporting the pan allowed the pan to move sideways due to weight. Side movement of pan pinched IE's arm between belly pan and side frame of tractor.
IE was assisting another tech installing a bogie roller on a dozer. The IE was holding the bogie in place when it unexpectedly moved. The movement allowed the bogie to fall forward, raising the back of the bogie and pinching the IE's finger between the top of the bogie and bottom of the push arm.
27X49 tire wheel lock failed and struck miner in the hard hat/left forehead. Laceration required stitches.
IE alleges that EE jarred EE's shoulders opening a gate resulting in a rotator tear that will require surgery to repair.
Attempting to mount the chain case of a motor grader while lifting a starter into place. Slipped in mud, fell forward and pinched right little finger distal between the starter and chain case.
IE claims got dust in eye on 04/09 at 5:30pm. Thought it would go away, so EE did not report it to the supervisor. Irritation was present the next morning, so EE reported to the supervisor. Treating doctor prescribed an antibiotic ointment after removing 2 small pieces of dirt/rock.
Unloading a tightly packed shipping container filled with machining equipment. Stored energy due to the amount of equipment in container and movement equipment inside during travel of container. Mashed fingers between two metal boxes.
IE was attempting to put a dragline tooth in place. IE dropped the tooth and it struck an adapter on the ground. The energy from the two pieces of metal striking each other resulted in a sliver of metal striking the IE in the right shin. Metal was removed by a doctor.
IE was attempting to connect the discharge hose to a pump when the pump capsized. IE was struck by the pump resulting in fractured ribs.
IE placed a brake pod assembly on the back of his service truck. The assembly began to roll and the IE attempted to catch it. His hand was caught between the brake pod and bumper of truck resulting in a fracture to the right hand first metacarpal.
IE positioned outside bed of coworker's truck in employee parking lot, on driver's side. IE lifted tool box right side slid off bed rail and fell in bed of truck. Movement of box allowed IE's left thumb to be caught between tool box and bed rail of truck. IE told coworker to pull tool box because his thumb was caught. Coworker pulled box, caused avulsion required sutures.
IE was assisting in positioning a loader tooth, when IE pulled IE felt pain in right shoulder. IE underwent surgery on May 8, 2014.
Team was replacing power cable at shovel. 30' of cable was spooled off cable reel. Cable reel operator backed up and spooled more cable off reel. Unknown to operator cable had backlashed on reel. Cable was being reeled back onto reel. Cable tight-lined, movement of cable struck IE on left leg. 4/9/2014 a brace was prescribed to support leg, IE was placed on Light Duty.
Employee was removing a belly pan on a D11, the pan was resting on a jack. A passing mine employee asked if our employee needed help pulling the jack out from under the machine. While moving the jack the pan slid off of the jack falling on our employee's foot.
Tower locking cyl. rod on IR DM-M2 drill had stripped from the locking pin. Contract tech and IE were in the process of positioning the cyl. rod in preparation to weld the rod to the pin. As the contractor was controlling the movement of the cyl. the IE was aligning the rod and pin. IE had his right thumb in a pinch point resulting in an amputation.
IE and co-worker were replacing a sway bar on a haul truck. a broken portion of the sway bar was attached to the pin. As the pin started out of the frame bushing the IE reached to steady the pin, it rotated allowing a sharp edge to contact the IE's arm. IE was transported to hospital. IE received 9 sutures to repair the laceration then returned to work.
IE WAS REMOVING A CHOKER FROM AN ELEVATED AREA, HE WAS UNAWARE THERE WAS A CLEVIS ON THE OTHER END OF THE SLING, WHEN HE PULLED DOWN ON THE SLING THE CLEVIS SWUNG AND HIT IE IN THE MOUTH. FACIAL PORTION OF THE #8 TOOTH WAS SHEERED REQUIRING A CROWN TO REPAIR THE TOOTH.
IE was assisting maint crew install latch bar and lever on shovel. Once the latch bar slid into the trip lever the IE stumbled backwards, IE tried to regain balance and his arm got bound up under the trip lever bending his wrist backward and resulting in a fractured left arm just above the wrist. The fracture was set at the ER.
IE and 4 other techs were replacing a snub pulley. A piece of channel was used to position the pulley. IE pulled on the channel before securing the channel for removal the other end fell into the chute, the end he was pulling on raised. IE's left hand was caught between the channel and the pillow block, resulting in a fracture of the middle metacarpal shaft.
IE was installing dump door on belly dump coal hauler. IE was aligning and trying to install the inside pin, when the door moved and the cylinder hit the IE in the upper right arm resulting in a fracture.
IE was part of a team replacing the latch bar on a shovel. IE was kneeling on a support of the door and inadvertently placed his fingers in a pinch point while trying to get the latch bar and trip lever to align. X-rays were negative but the IE was taken off work due to the medication prescribed for pain management.
Emp. was repairing BE 495II shovel. Metal 1" thick, with the dimensions of 48" long by 32" tapering to 16", was being used for the repairs. Metal shifted and slid off supporting tabs and beam. The plate fell and struck Emp's. left forearm and then his wrist. On 3/30/2009 Emp. was examined by NM Orthopedics and it has been determined he fractured his left wrist.
ON 8/11/04 EE LIFTED AN 80 LB. SWIVEL HEAD ATTACHMENT SEVERAL TIMES WITHOUT PAIN BUT WHEN HE GOT OUT OF HIS VEHICLE AT HOME, HE FELT PAIN TO HIS LOWER BACK. HE REPORTED THE PAIN THE NEXT DAY. THE DOCTOR ALLOWED HIM TO CONTINUE WORKING BUT ON 8/25 WHILE STARTING TO CLIMB A HAUL TRUCK LADDER, HE FELT PAIN AGAIN. ON 9/2 AN MRI SHOWED DISC AND FACET DISEASE AND FACET ANTHROPATHY.
LIFTING EYE USED TO HOLD PAN STRIPPED OUT OF THREADS ALLOWING BELLY PAN TO PIVOT AND HIT EE IN THE LEFT KNEE.
RIGHT THUMB PINCHED IN PISTON OF PNEUMATIC LUBE PUMP.
LACERATION TO LEFT MIDDLE FINGER.
AVULSION TO RIGHT MIDDLE DISTAL REQUIRING SUTURES.
CAUGHT ARM BETWEEN DRISCO WATER PIPE AND ROCK.
STAINED SHOULDER.
STRUCK BY A AIR HOSE.