Buscar en el registro

When repairing a 6" water line coupler, the coupler broke striking the employees hand. He received lacerations on two fingers requiring sutures.

The EE was straightening a 6' torgue tensioned bolt and the bolt spun around, injuring the EE's left shoulder.

The employee twisted his back lifting a jack.

Bolter steel bent and flew over striking ee's left thumb.

The employee received a laceration on his thumb and middle finger when a lifting strap slipped off when changing a battery. The laceration on his thumb required 6 stitches.

The employee cut his finger repairing a hawkeye on a shaker screen. The laceration required 4 stitches.

The employee pulled (injured) his lower back loading bolts from the scoop bucket to the bolting machine. His first lost time was November 5, 2007

The employee injured himself on 8-21-07 moving a rock out of the way by hand. Continued working until 12-13-07 when he had surgery to repair a hernia.

While moving a fire extinguisher, one accidentally went off. Employee breathed some of the powder.

Employee lifted belt structure and felt something pull in his left shoulder.

Employee injured groin on 6/9/06 lifting a bucket jack. Had surgery on 8/16/06 to repair a hernia.

The employee received a laceration requiring 8 stitches on a sharp piece of metal when working on a shuttle car.

When freeing a stuck drill steel, the EE chipped a front tooth.

While carring bolter supplies employee felt pain in his groin. He was diagnosed with a hernia. On 3/7/06 he had surgery to repair it.

While loading the scoop with dust the employees back started to hurt.

Employee threw a 6' bolt on the roof bolter. The bolt bounced striking him in his upper lip. Required 5 stitches outside and 1 stitch inside.

The ee pulled down a loose piece of rock (24"x36"x4" thickin the (enter triangular with shape) when it hit the bottom the piece flopped over striking his left knee.

Employee straightened a roof bolt and he injured his right shoulder.

When moving a piece of rock the employee felt a burning sensation in his lower right groin area. His last day of work was 03-16-05. He is scheduled to have surgery to repair the hernia on 03-17-05.

WHILE REMOVING A BANKING BOARD(MADE OF STEEL) EE SLID HAND ACROSS THE SHARP EDGE OF METAL, RECEIVING A CUT THAT REQUIRED 16 STITCHES.

ON 12/14/04 EE FELT SOMETHING IN HIS NECK WHILE TAKING A SHOWER. THE NEXT MORNING EE VISITED A PHYSICIAN AND WAS ADMITTED TO HOSPITAL (15TH, 16TH, 17TH) FOR POSSIBLE HEART PROBLEMS. ON 12/20 EE CALLED THE MINE SITE STATING HE HURT HIMSELF SHOVELING AND HAD A HERNIATED DISC IN HIS NECK AND WOULD BE OFF WORK. EE STARTED PHYSICAL THERAPY ON 12/20.

WHILE PULLING BOLTER CABLE WHEN OPERATOR WAS BACKING MACHINE OUT OF THE FACE AREA, THE EMPLOYEE FELT PAIN IN HIS LOWER BACK.

THE EE TWISTED HIS KNEE WHILE HAND-LOADING BOLTING SUPPLIES ON THE SCOOP BUCKET.

WHEN PUTTING A MOTOR COVER ON THE MINER, IT SLIPPED AND CUT HIS LEFT INDEX FINGER. THE CUT REQUIRED FOUR STITCHES TO CLOSE.

While bolting the ee felt a sharp pain in his lower back.

WHILE SHOVELING A COAL SPILL, THE EMPLOYEE FELT A SHARP PAIN IN THE LEFT SIDE OF HIS GROIN. HE LATER VISITED A PHYSICIAN AND WAS DIAGNOSED WITH A HERNIA AND ON 6/30/04 HE HAD SURGERY TO REPAIR IT.

EE WAS WORKING AS A CHAINMAN ON SURVEYOR CREW WHEN HE PULLED SURVEYOR CHAIN TIGHT.

IN CONSULTATION WITH HIS FAMILY DOCTOR, HE HAD AN OPERATION TO REPAIR A HERNIA. THERE WAS NO SPECIFIC INCIDENT TO ATTRIBUTE THIS CONDITION.

WHILE LIFTING THE MINER CABLE ON TOP OF A SHUTTLE CAR HE INJURED HIS BACK.

WHILE CLEANING OUT A ROCK DUSTER HOPPER WITH HIS HAND, THE EE RUBBED HIS HAND ACROSS A SHARP OBJECT RECEIVING A CUT TO HIS LITTLE FINGER ON HIS RIGHT HAND REQUIRING THREE SUTURES.

WHILE EE WAS CHANGING A RIGHT SIDE GATHERING MOTOR IN A EIMCO 2810-0 MINER THE MOTOR SLIDE TO ONE SIDE CUTTING THE EE'S LEFT HAND REQUIRING 5 STITCHES.

EMPLOYEE WAS PULLING MINER CABLE WITH SCOOP WHILE BACKING UP AND TURNING INTO A CROSSCUT DODGING LINE AND WATCHING FOR FELLOW WORKERS TO FLAG. INADVERTANTLY GOT HIS LEFT HAND OUTSIDE KITCHEN GETTING HIS HAND PINCHED BETWEEN PIVOT POINT. RECEIVING 2 BROKEN FINGERS AND THREE DISLOCATED FINGERS.

WHILE THE EE WAS LIFTING A CONVEYOR MOTOR FOR A SHUTTLE CAR ON 12-21-01, HE FELT PAIN INHIS GROIN. SOMETIME IN FEBRUARY HE WENT TO A PHYSICIAN AND DISCOVERED HE HAD A HERNIA. 3-5 WAS HIS LAST DAY OF WORK. HE HAD A HERNIA OPERATION ON 3-6-02.